In the article is described one of the concepts how to mass produce the complex-shaped part prepared as a prototype in manual way without the analytical and dimensional characteristics. The technology selection for production of the parts listed above in specific plant conditions is influenced by several requests as are for example material and shape of the part, number of parts, types of available machines, etc. The base for problem solution can be the computer aid, NC machines and modern equipments that are used within the method Reverse engineering. It is the process of obtaining a geometric CAD model from 3D points acquired by scanning existing object. Presented concept of data digitizing enables the automation of the production, so it can considerably decrease the economic cost and greatly affect the efficiency of the part manufacturing.
[1]
Krzysztof Nadolny,et al.
Effective Manufacturing Method for Automated Inside Diameter Grinding
,
2007
.
[2]
Jan Valíček,et al.
Surface geometric parameters proposal for the advanced control of abrasive waterjet technology
,
2008
.
[3]
Peter Michalik,et al.
Machining of Wood Plastic Composite (Pilot Experiment)
,
2012
.
[4]
Dražan Kozak,et al.
Deformations after heat treatment and their influence on cutting process
,
2011
.
[5]
Anton Panda,et al.
Verification of Cutting Zone Machinability during the Turning of a New Austenitic Stainless Steel
,
2011
.