Advanced Electrified Automotive Powertrain with Composite DC-DC Converter

[1]  Babak Nahid-Mobarakeh,et al.  Comparison Criteria for Electric Traction System Using Z-Source/Quasi Z-Source Inverter and Conventional Architectures , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[2]  A K Jain,et al.  Pwm control of dual active bridge: Comprehensive analysis and experimental verification , 2011, IEEE Transactions on Power Electronics.

[3]  Atsuo Kawamura,et al.  Principle verification prototype chopper using SiC MOSFET module developed for partial boost circuit system , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[4]  F. Lee,et al.  On a Future for Power Electronics , 2013 .

[5]  M. Venturini,et al.  Solid-state power conversion: A Fourier analysis approach to generalized transformer synthesis , 1981 .

[6]  Sinisa Jurkovic,et al.  Next generation chevy volt electric machines; design, optimization and control for performance and rare-earth mitigation , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[7]  M. Gaboriault,et al.  A high efficiency, noninverting, buck-boost DC-DC converter , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[8]  R. D. De Doncker,et al.  Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[9]  Krishna Shenai,et al.  CoolMOS integral diode: a simple analytical reverse recovery model , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[10]  Ka Wai Eric Cheng,et al.  ZCS-ZVS bi-directional phase-shifted DC-DC converter with extended load range , 2003 .

[11]  K. B. Wipke,et al.  ADVISOR 2.1: a user-friendly advanced powertrain simulation using a combined backward/forward approach , 1999 .

[12]  Y. C. Kao,et al.  Correlations between reverse recovery time and lifetime of p-n junction driven by a current ramp , 1970 .

[13]  Charles R. Sullivan.  Optimal choice for number of strands in a litz-wire transformer winding , 1997 .

[14]  Naritomo Higuchi,et al.  Efficiency enhancement of a new two-motor hybrid system , 2013, 2013 World Electric Vehicle Symposium and Exhibition (EVS27).

[15]  Johann W. Kolar,et al.  Accurate Power Loss Model Derivation of a High-Current Dual Active Bridge Converter for an Automotive Application , 2010, IEEE Transactions on Industrial Electronics.

[16]  C. C. Chan,et al.  The state of the art of electric and hybrid vehicles , 2002, Proc. IEEE.

[17]  Atsuo Kawamura,et al.  High Efficiency Energy Conversion System for Decreaces in Electric Vehicle Battery Terminal Voltage , 2016 .

[18]  T. Fujihira.  Theory of Semiconductor Superjunction Devices , 1997 .

[19]  Charles R. Sullivan,et al.  Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters , 2002, 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings..

[20]  Atsuo Kawamura,et al.  Verification of efficient operation for high power DC chopper , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[21]  D. C. Jones,et al.  Probabilistic Analysis of a Generalized Perturb and Observe Algorithm Featuring Robust Operation in the Presence of Power Curve Traps , 2013, IEEE Transactions on Power Electronics.

[22]  Johann W. Kolar,et al.  Performance Optimization of a High Current Dual Active Bridge with a Wide Operating Voltage Range , 2006 .

[23]  F.Z. Peng,et al.  Comparison of Traditional Inverters and $Z$ -Source Inverter for Fuel Cell Vehicles , 2004, IEEE Transactions on Power Electronics.

[24]  Douglas J. Nelson,et al.  Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[25]  H. Benda,et al.  Reverse recovery processes in silicon power rectifiers , 1967 .

[26]  Chris Mi,et al.  Hybrid Electric Vehicles: Principles and Applications with Practical Perspectives , 2011 .

[27]  D.J. Perreault,et al.  New architectures for radio-frequency DC/DC power conversion , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[28]  C. C. Chan,et al.  An overview of electric vehicle technology , 1993, Proc. IEEE.

[29]  P. L. Dowell,et al.  Effects of eddy currents in transformer windings , 1966 .

[30]  C. Q. Lee,et al.  Steady state analysis of the parallel resonant converter with LLCC-type commutation network , 1989, 20th Annual IEEE Power Electronics Specialists Conference.

[31]  F. Crescimbini,et al.  Experimental study of a bidirectional DC-DC converter for the DC link voltage control and the regenerative braking in PM motor drives devoted to electrical vehicles , 1994, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94.

[32]  Dragan Maksimovic,et al.  Design of a high efficiency 30 kW boost composite converter , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[33]  G.O. Garcia,et al.  Switching Control Strategy to Minimize Dual Active Bridge Converter Losses , 2009, IEEE Transactions on Power Electronics.

[34]  T. Durbaum,et al.  Calculating core losses in transformers for arbitrary magnetizing currents a comparison of different approaches , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[35]  Gereon Meyer,et al.  Electric vehicle business models : global perspectives , 2015 .

[36]  Robert H. Kingston,et al.  Switching Time in Junction Diodes and Junction Transistors , 1954, Proceedings of the IRE.

[37]  Masayoshi Yamamoto,et al.  Optimal control design method for trans-linked type multi-phase boost converter , 2011, 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems.

[38]  K. Smedley,et al.  A Resonant DC-DC transformer with Zero Current Ripple , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[39]  I. Barbi,et al.  A flying-capacitor ZVS PWM 1.5 kW DC-to-DC converter with half of the input voltage across the switches , 2000 .

[40]  R.V. White,et al.  Emerging on-board power architectures , 2003, Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC '03..

[41]  R. Krishnan,et al.  Electric Motor Drives: Modeling, Analysis, and Control , 2001 .

[42]  C. Graham.  Physical origin of losses in conducting ferromagnetic materials (invited) , 1982 .

[43]  T.A. Meynard,et al.  Multi-level conversion: high voltage choppers and voltage-source inverters , 1992, PESC '92 Record. 23rd Annual IEEE Power Electronics Specialists Conference.

[44]  Masayoshi Yamamoto,et al.  Optimal design of digital control system for interleaved boost chopper circuit with the coupled inductor , 2011, 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems.

[45]  F.C. Lee,et al.  A family of high power density unregulated bus converters , 2005, IEEE Transactions on Power Electronics.

[46]  D. C. Jones,et al.  A Nonlinear State Machine for Dead Zone Avoidance and Mitigation in a Synchronous Noninverting Buck–Boost Converter , 2013, IEEE Transactions on Power Electronics.

[47]  Frede Blaabjerg,et al.  Impedance-Source Networks for Electric Power Conversion Part I: A Topological Review , 2015, IEEE Transactions on Power Electronics.

[48]  Paolo Mattavelli,et al.  Pulsewidth Locked Loop (PWLL) for Automatic Resonant Frequency Tracking in LLC DC–DC Transformer (LLC -DCX) , 2013, IEEE Transactions on Power Electronics.

[49]  Robert W. Erickson,et al.  Analysis of Switching Circuits Through Incorporation of a Generalized Diode Reverse Recovery Model Into State Plane Analysis , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[50]  Ali Emadi,et al.  A Compensation Technique for Smooth Transitions in Non-inverting Buck-Boost Converter , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[51]  Fang Zheng Peng,et al.  Application of Z-Source Inverter for Traction Drive of Fuel Cell—Battery Hybrid Electric Vehicles , 2007, IEEE Transactions on Power Electronics.

[52]  Robert W. Erickson,et al.  Buck-boost PWM converters having two independently controlled switches , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[53]  G. Deboy,et al.  COOLMOS/sup TM/-a new milestone in high voltage power MOS , 1999, 11th International Symposium on Power Semiconductor Devices and ICs. ISPSD'99 Proceedings (Cat. No.99CH36312).

[54]  S. Hashino,et al.  High power density DC/DC converter using the close-coupled inductors , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[55]  Dragan Maksimovic,et al.  A 98.7% efficient composite converter architecture with application-tailored efficiency characteristic , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[56]  F.C. Lee,et al.  High efficiency quasi-parallel Voltage Regulators , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.

[57]  Atsuo Kawamura,et al.  Snubber-Assisted Zero-Voltage and Zero-Current Transition Bilateral Buck and Boost Chopper for EV Drive Application and Test Evaluation at 25 kW , 2009, IEEE Transactions on Industrial Electronics.

[58]  António J. Marques Cardoso,et al.  Efficiency Analysis of Drive Train Topologies Applied to Electric/Hybrid Vehicles , 2012, IEEE Transactions on Vehicular Technology.

[59]  G. Ivensky,et al.  A resonant DC-DC transformer , 1992, [Proceedings] APEC '92 Seventh Annual Applied Power Electronics Conference and Exposition.

[60]  P. O. Lauritzen,et al.  A simple diode model with reverse recovery , 1991 .

[61]  Dragan Maksimovic,et al.  A high power density drivetrain-integrated electric vehicle charger , 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

[62]  K. Vangen,et al.  Efficient high-frequency soft-switched power converter with signal processor control , 1991, [Proceedings] Thirteenth International Telecommunications Energy Conference - INTELEC 91.

[63]  Masayoshi Yamamoto,et al.  Recovery-less boost converter for Electric Vehicle , 2009, 2009 13th European Conference on Power Electronics and Applications.

[64]  Chas.P. Steinmetz,et al.  On the law of hysteresis , 1984, Proceedings of the IEEE.

[65]  Yan Liang,et al.  Optimal design methodology for LLC resonant converter , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[66]  Munehiro Kamiya,et al.  Development of Traction Drive Motors for the Toyota Hybrid System , 2006 .

[67]  D.M. Divan,et al.  A three-phase soft-switched high power density DC/DC converter for high power applications , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[68]  F.C. Lee,et al.  Computer-aided design for high-frequency power transformers , 1990, Fifth Annual Proceedings on Applied Power Electronics Conference and Exposition.

[69]  J.L. Duarte,et al.  Transformer-Coupled Multiport ZVS Bidirectional DC–DC Converter With Wide Input Range , 2008, IEEE Transactions on Power Electronics.

[70]  B. Lax,et al.  Transient Response of a p‐n Junction , 1954 .

[71]  Dragan Maksimovic,et al.  Electrified Automotive Powertrain Architecture Using Composite DC–DC Converters , 2017, IEEE Transactions on Power Electronics.

[72]  Hirofumi Akagi,et al.  A Bi-Directional Isolated DC/DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion System , 2006 .

[73]  Hua Bai,et al.  Eliminate Reactive Power and Increase System Efficiency of Isolated Bidirectional Dual-Active-Bridge DC–DC Converters Using Novel Dual-Phase-Shift Control , 2008, IEEE Transactions on Power Electronics.

[74]  R. H. Staunton,et al.  Evaluation of 2004 Toyota Prius Hybrid Electric Drive System , 2004 .

[75]  F.W. Fuchs,et al.  Comparison of a Z-source inverter and a voltage-source inverter linked with a DC/DC-boost-converter for wind turbines concerning their efficiency and installed semiconductor power , 2008, 2008 IEEE Power Electronics Specialists Conference.

[76]  Makoto Yamazaki,et al.  Development of New-Generation Hybrid System THS II - Drastic Improvement of Power Performance and Fuel Economy , 2004 .

[77]  Dan Holden Wolaver,et al.  Fundamental study of dc to dc conversion systems , 1969 .

[78]  D. Maksimovic,et al.  Design and Control for High Efficiency in High Step-Down Dual Active Bridge Converters Operating at High Switching Frequency , 2013, IEEE Transactions on Power Electronics.

[79]  C.R. Sullivan,et al.  Improved calculation of core loss with nonsinusoidal waveforms , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[80]  Jun Imaoka,et al.  Inductor loss analysis of various materials in interleaved boost converters , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[81]  A. T. Russell,et al.  Sine Amplitude Converters for efficient datacenter power distribution , 2012, 2012 International Conference on Renewable Energy Research and Applications (ICRERA).

[82]  Atsuo Kawamura,et al.  Bilateral SAZZ chopper circuit for HEV , 2006 .

[83]  F.Z. Peng,et al.  Four quasi-Z-Source inverters , 2008, 2008 IEEE Power Electronics Specialists Conference.

[84]  Po-Wa Lee,et al.  Steady-state analysis of an interleaved boost converter with coupled inductors , 2000, IEEE Trans. Ind. Electron..

[85]  Diego G. Lamar,et al.  Modeling capacitive non-linearities and displacement currents of high-voltage SuperJunction MOSFET in a novel analytical switching loss model , 2014, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL).

[86]  J. Tihanyi,et al.  A new generation of high voltage MOSFETs breaks the limit line of silicon , 1998, International Electron Devices Meeting 1998. Technical Digest (Cat. No.98CH36217).

[87]  C. C. Chan,et al.  The State of the Art of Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.

[88]  R.W. De Doncker,et al.  The auxiliary resonant commutated pole converter , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[89]  Gaston H. Gonnet,et al.  On the LambertW function , 1996, Adv. Comput. Math..

[90]  Fang Zheng Peng.  Z-source inverter , 2002 .

[91]  A. Kawamura,et al.  Bi-directional buck/boost dc-dc converter with ultra high efficiency based on improved SAZZ topology , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[92]  B. Ozpineci.  Comparison of Wide-Bandgap Semiconductors for Power Electronics Applications , 2004 .

[93]  K. Asano,et al.  High Performance Motor Drive Technologies for Hybrid Vehicles , 2007, 2007 Power Conversion Conference - Nagoya.