Finite element modelling of substrate thermal distortion in direct laser additive manufacture of an aero-engine component

The shape complexity of aerospace components is continuously increasing, which encourages researchers to further refine their manufacturing processes. Among such processes, blown powder direct laser deposition process is becoming an economical and energy efficient alternative to the conventional machining process. However, depending on their magnitudes, the distortion and residual stress generated during direct laser deposition process can affect the performance and geometric tolerances of manufactured components. This article reports an investigation carried out using the finite element analysis method to predict the distortion generated in an aero-engine component produced by the direct laser deposition process. The computation of the temperature induced during the direct laser deposition process and the corresponding distortion on the component was accomplished through a three-dimensional thermo-structural finite element analysis model. The model was validated against measured distortion values of the real component produced by direct laser deposition process using a Trumpf DMD505 CO2 laser. Various direct laser deposition fill patterns (orientation strategies/tool movement) were investigated in order to identify the best parameters that will result in minimum distortion.

[1]  増淵 興一,et al.  Analysis of welded structures : residual stresses, distortion, and their consequences , 1980 .

[2]  Influence of an intermediate layer on the residual stress field in a laser clad , 1991 .

[3]  Lee E. Weiss,et al.  Laser Deposition of Metals for Shape Deposition Manufacturing , 1996 .

[4]  Development of New Welding Pattern in Order to Minimise Distortions in Marine Structure , 1997 .

[5]  M. L. Griffith,et al.  Understanding thermal behavior in the LENS process , 1999 .

[6]  S. C. Park,et al.  Weldin g Distortion of a Thin-Plate Panel Structure , 1999 .

[7]  Lin Li,et al.  An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel , 2003 .

[8]  N. Klingbeil,et al.  Prediction of Microstructure in Laser Deposition of Titanium Alloys , 2002 .

[9]  R. Vilar,et al.  Physical–computational model to describe the interaction between a laser beam and a powder jet in laser surface processing , 2002 .

[10]  Gernot Pottlacher,et al.  Thermophysical properties of solid and liquidInconel 718 Alloy , 2002 .

[11]  Steffen Nowotny,et al.  Laser cladding of the titanium alloy TI6242 to restore damaged blades , 2004 .

[12]  X. Richard Zhang,et al.  Finite Element Analysis of Pulsed Laser Bending: The Effect of Melting and Solidification , 2004 .

[13]  Johan Martinsson.  Fatigue assessment of complex welded steel structures , 2005 .

[14]  T. Clyne,et al.  Residual Stress Generation during Laser Cladding of Steel with a Particulate Metal Matrix Composite , 2006 .

[15]  Todd Palmer,et al.  Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium , 2007 .

[16]  Viorel Deaconu.  Finite Element Modelling of Residual Stress - A Powerful Tool in the Aid of Structural Integrity Assessment of Welded Struct ures , 2007 .

[17]  K. Davey,et al.  A numerical and experimental investigation into residual stress in thermally sprayed coatings , 2007 .

[18]  E. Toyserkani,et al.  A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process , 2007 .

[19]  Mark Whittaker,et al.  Shaped metal deposition of a nickel alloy for aero engine applications , 2008 .

[20]  Philip J. Withers,et al.  Global mechanical tensioning for the management of residual stresses in welds , 2008 .

[21]  Xue-song Liu,et al.  Welding deformation controlling of aluminum-alloy thin plate by two-direction pre-stress method , 2009 .

[22]  D. Tanner.  Life assessment of welded INCONEL 718 at high temperature , 2009 .

[23]  Michael F. Ashby,et al.  Materials and the Environment: Eco-informed Material Choice , 2009 .

[24]  H. Fraser,et al.  Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures , 2009 .

[25]  J. Allen,et al.  High-rate laser metal deposition of Inconel 718 component using low heat-input approach , 2010 .

[26]  Huan Qi,et al.  Adaptive toolpath deposition method for laser net shape manufacturing and repair of turbine compressor airfoils , 2010 .

[27]  Miguel Cervera,et al.  Finite element modeling of multi-pass welding and shaped metal deposition processes , 2010 .

[28]  M. Sheikh,et al.  Understanding the effect of non-conventional laser beam geometry on material processing by finite-element modelling , 2010 .

[29]  M. Pouranvari,et al.  Metallurgical and Mechanical Characterization of Laser Spot Welded Low Carbon Steel Sheets , 2010 .

[30]  D. Misra,et al.  Finite element simulation of 3-D laser forming by discrete section circle line heating , 2010 .

[31]  D. Clark,et al.  Microstructural Characterization of a Polycrystalline Nickel-Based Superalloy Processed via Tungsten-Intert-Gas-Shaped Metal Deposition , 2010 .

[32]  Mark Whittaker,et al.  Microstructural Characterization of a Prototype Titanium Alloy Structure Processed via Direct Laser Deposition (DLD) , 2011, Metallurgical and Materials Transactions B.

[33]  M. Preuss,et al.  Residual stresses in laser direct metal deposited Waspaloy , 2011 .

[34]  Lin Li,et al.  Modelling of the Melt Pool Geometry in the Laser Deposition of Nickel Alloys Using the Anisotropic Enhanced Thermal Conductivity Approach , 2011 .

[35]  Y. Shin,et al.  Modeling of the Off-Axis High Power Diode Laser Cladding Process , 2011 .

[36]  S. Marimuthu,et al.  A numerical investigation into residual stress characteristics in laser deposited multiple layer waspaloy parts , 2011 .

[37]  Numerical Analysis of Controlling Welding Deformation of the Wall Plate of Large Cylindrical Structure by Pre-Stress Method , 2011 .

[38]  Alberto Cardona,et al.  Computational modelling of shaped metal deposition , 2011 .