Emissions from DME combustion in diesel engines and their implications on meeting future emission norms: A review

Dimethyl Ether (DME) is an alternative liquid fuel developed mainly from coal and natural gas that can be used in compression ignition (CI) engines without major modifications to the diesel configuration. One of the advantages of DME combustion is the low emission levels of nitrous oxides (NOx) and particulate matter (PM) when compared to diesel combustion. Research so far were largely focused on tackling issues due to less viscosity and low heating capacity of DME as compared to diesel and in developing DME specific fuel system to overcome its incompatibility with rubber seals. In this paper, the body of experimental and numerical research on gaseous and PM emissions from DME combustion is reviewed, with the objective being to identify promising methods for emission control in DME engines. Gaseous emissions from DME combustion is a well-researched topic, while PM emissions has not yet been explored in detail. PM emissions, especially ultra-fine particulate matter (UFPM), are expected to become a major concern with the implementation of future emission norms. This review paper critically evaluates some of the novel methods of emission control in CI engines to meet future emission regulations using fuel injection strategies, combustion after-treatment and suggests future direction for DME research.

[1]  Jessie Y.C. Chen,et al.  Development and Validation of a Reduced DME Mechanism Applicable to Various Combustion Modes in Internal Combustion Engines , 2011 .

[2]  K. Otake,et al.  Critical properties of three dimethyl ether binary systems : Dimethyl ether (RE-170) + propane (HC-290), butane (HC-600), and 2-methyl propane (HC-600A) , 2005 .

[3]  P. Solomon,et al.  Airborne Particulate Matter and Human Health: A Review , 2005 .

[4]  A. York,et al.  Modeling the Emissions Control Performance of a Catalyzed Diesel Particulate Filter (CDPF) System for Light Duty Diesel Applications , 2009 .

[5]  Investigation of the injection process and combustion of a dimethyl ether engine with different nozzle flow areas , 2012 .

[6]  Zhen Huang,et al.  Characteristics of ultrafine particle from a compression-ignition engine fueled with low sulfur diesel , 2009 .

[7]  Athanasios Tsolakis,et al.  Promoting hydrocarbon-SCR of NOx in diesel engine exhaust by hydrogen and fuel reforming , 2009 .

[8]  Takashi Sakamoto,et al.  Performance and Emission Characteristics of a DI Diesel Engine Operated on Dimethyl Ether Applying EGR with Supercharging , 2000 .

[9]  A. Megaritis,et al.  Partially premixed charge compression ignition engine with on-board H2 production by exhaust gas fuel reforming of diesel and biodiesel , 2005 .

[10]  Ho Teng,et al.  Thermochemical Characteristics of Dimethyl Ether - An Alternative Fuel for Compression-Ignition Engines , 2001 .

[11]  Federico Millo,et al.  Influence of Multiple Injection Strategies on Emissions, Combustion Noise and BSFC of a DI Common Rail Diesel Engine , 2002 .

[12]  T. Johnson,et al.  Diesel Emissions in Review , 2011 .

[13]  Wang Ying,et al.  Study on combustion and emission characteristics of a vehicle engine fuelled with dimethyl ether , 2005 .

[14]  Hisaharu Takeuchi,et al.  A Study of Dimethyl Ether(DME) Flow in Diesel Nozzle , 2004 .

[15]  G. Nagarajan,et al.  An insight on hydrogen fuel injection techniques with SCR system for NOX reduction in a hydrogen–diesel dual fuel engine , 2009 .

[16]  Daniel Sabathil,et al.  The Influence of DISI Engine Operating Parameters on Particle Number Emissions , 2011 .

[17]  Norimasa Iida,et al.  Analysis of DME homogeneous charge compression ignition combustion , 2003 .

[18]  Güunter Oberdürster.  Toxicology of ultrafine particles: in vivo studies , 2000, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[19]  Kihyung Lee,et al.  A study on the characteristics of spray and combustion in a HCCI engine according to various injection angles and timings , 2007 .

[20]  Octavio Armas,et al.  Emissions from different alternative diesel fuels operating with single and split fuel injection , 2010 .

[21]  Huang Zhen,et al.  Emission reduction potential of using gas-to-liquid and dimethyl ether fuels on a turbocharged diesel engine. , 2009, The Science of the total environment.

[22]  Koji Yoshida,et al.  HCCI combustion characteristics during operation on DME and methane fuels , 2009 .

[23]  Frederick L. Dryer,et al.  The reaction kinetics of dimethyl ether. I: High‐temperature pyrolysis and oxidation in flow reactors , 2000 .

[24]  C. Myung,et al.  Exhaust nanoparticle emissions from internal combustion engines: A review , 2011 .

[25]  Wang Ying,et al.  Study of HCCI-DI combustion and emissions in a DME engine , 2009 .

[26]  F. Dryer,et al.  Measurements of dimethyl ether/air mixture burning velocities by using particle image velocimetry , 2004 .

[27]  Wang Ying,et al.  Experimental study on exhaust emissions from a multi-cylinder DME engine operating with EGR and oxidation catalyst , 2008 .

[28]  Günter Oberdörster,et al.  Ultrafine particles in the urban air: to the respiratory tract--and beyond? , 2002, Environmental health perspectives.

[29]  Duane L. Abata,et al.  Dimethyl Ether in Diesel Fuel Injection Systems , 1998 .

[30]  José M. Desantes,et al.  Effects of current engine strategies on the exhaust aerosol particle size distribution from a Heavy-Duty Diesel Engine , 2005 .

[31]  Wang Ying,et al.  Diesel emission improvements by the use of oxygenated DME/diesel blend fuels , 2006 .

[32]  Y. Aoyagi,et al.  Effective BSFC and NOx Reduction on Super Clean Diesel of Heavy Duty Diesel Engine by High Boosting and High EGR Rate , 2011 .

[33]  J. Chomiak,et al.  3-D Diesel Spray Simulations Using a New Detailed Chemistry Turbulent Combustion Model , 2000 .

[34]  Jun Song,et al.  Performance of a controllable premixed combustion engine fueled with dimethyl ether , 2004 .

[35]  Bernd Fusshoeller,et al.  Strategies Towards Meeting Future Particulate Matter Emission Requirements in Homogeneous Gasoline Direct Injection Engines , 2011 .

[36]  Seung Hyun Yoon,et al.  An investigation of the effects of spray angle and injection strategy on dimethyl ether (DME) combus , 2010 .

[37]  Zhong-chang Liu,et al.  Investigation of particle emission characteristics from a diesel engine with a diesel particulate filter for alternative fuels , 2012 .

[38]  Zhen Huang,et al.  New controllable premixed combustion for dimethyl ether engine , 2003 .

[39]  William J. Pitz,et al.  A WIDE RANGE MODELING STUDY OF DIMETHYL ETHER OXIDATION , 1997 .

[40]  K. Park.  A differential equation for vapor pressure as a function of temperature , 2010 .

[41]  Robert W. Dibble,et al.  AUTOIGNITION OF DIMETHYL ETHER AND DIMETHOXY METHANE SPRAYS AT HIGH PRESSURES , 1997 .

[42]  T. H. Fleisch,et al.  A New Clean Diesel Technology: Demonstration of ULEV Emissions on a Navistar Diesel Engine Fueled with Dimethyl Ether , 1995 .

[43]  Ricardo Novella,et al.  Particle Size Distribution Measurements from Early to Late Injection Timing Low Temperature Combustion in a Heavy Duty Diesel Engine , 2010 .

[44]  Minho Lee,et al.  Inter-laboratory correlation exercise on a light-duty diesel passenger vehicle to verify nano-particle emission characteristics by Korea particle measurement program , 2009 .

[45]  Byungchul Choi,et al.  A combined system of dimethyl ether (DME) steam reforming and lean NOx trap catalysts to improve NOx , 2011 .

[46]  Wolfgang Kreyling,et al.  Epidemiological evidence on health effects of ultrafine particles. , 2002, Journal of aerosol medicine : the official journal of the International Society for Aerosols in Medicine.

[47]  Choongsik Bae,et al.  Knock Characteristics in Liquefied Petroleum Gas (LPG)−Dimethyl Ether (DME) and Gasoline−DME Homogeneous Charge Compression Ignition Engines , 2009 .

[48]  Qiang Wei,et al.  Diesel Exhaust Particle Size: Measurement Issues and Trends , 1998 .

[49]  Su Han Park,et al.  Simultaneous reduction in the exhaust emissions by a high exhaust gas recirculation ratio in a dimethyl-ether-fuelled diesel engine at a low-load operating condition , 2012 .

[50]  David B. Kittelson,et al.  Single-Stage Dilution Tunnel Performance , 2001 .

[51]  Kyoungdoug Min,et al.  Reduced Chemical Kinetic Model of DME for HCCI Combustion , 2003 .

[52]  David B. Kittelson,et al.  On-road and laboratory evaluation of combustion aerosols-Part1: Summary of diesel engine results , 2006 .

[53]  C. Pope.  Review: Epidemiological Basis for Particulate Air Pollution Health Standards , 2000 .

[54]  Andre E Nel,et al.  Particulate air pollutants and asthma. A paradigm for the role of oxidative stress in PM-induced adverse health effects. , 2003, Clinical immunology.

[55]  D. Kittelson,et al.  The Influence of Engine Lubricating Oil on Diesel Nanoparticle Emissions and Kinetics of Oxidation , 2003 .

[56]  F. Yu,et al.  Role of the binary H2SO4–H2O homogeneous nucleation in the formation of volatile nanoparticles in the vehicular exhaust , 2006 .

[57]  Ho Teng,et al.  Can Heavy-Duty Diesel Engines Fueled with DME Meet US 2007/2010 Emissions Standard with A Simplified Aftertreatment System? , 2006 .

[58]  M. Yao,et al.  Study of dimethyl ether homogeneous charge compression ignition combustion process using a multi-dimensional computational fluid dynamics model , 2009 .

[59]  Su Han Park,et al.  Effects of dimethyl-ether (DME) spray behavior in the cylinder on the combustion and exhaust emissions characteristics of a high speed diesel engine , 2010 .

[60]  Q. Fang,et al.  Study on low nitrogen oxide and low smoke emissions in a heavy-duty engine fuelled with dimethyl ether , 2011 .

[61]  J. Chomiak,et al.  Evaluation of Ignition Improvers for Methane Autoignition , 1998 .

[62]  Huang Zhen,et al.  Emission characteristics of a turbocharged diesel engine fueled with gas-to-liquids , 2006 .

[63]  Modeling Study of Active Regeneration of a Catalyzed Particulate Filter Using One-Dimensional DOC and CPF Models , 2011 .

[64]  L. Ntziachristos,et al.  Diesel Particle Exhaust Emissions from Light Duty Vehiclesand Heavy Duty Engines , 2006 .

[65]  Byungchul Choi,et al.  Emission characteristics of exhaust gases and nanoparticles from a diesel engine with biodiesel-diesel blended fuel (BD20) , 2009 .

[66]  Leonidas Ntziachristos,et al.  Modelling of diesel exhaust aerosol during laboratory sampling , 2005 .

[67]  T. Johnson.  Review of Diesel Emissions and Control , 2010 .

[68]  Sven Bernesson,et al.  Future fuel supply systems for organic production based on Fischer–Tropsch diesel and dimethyl ether from on-farm-grown biomass , 2008 .

[69]  Choongsik Bae,et al.  Effects of valve events on the engine efficiency in a homogeneous charge compression ignition engine fueled by dimethyl ether , 2009 .

[70]  R. Reitz,et al.  MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODEL , 1999 .

[71]  Su Han Park,et al.  Combustion performance and emission reduction characteristics of automotive DME engine system , 2013 .

[72]  Kihyung Lee,et al.  An experimental study on the spray behavior and fuel distribution of GDI injectors using the entropy analysis and PIV method , 2004 .

[73]  Zhang Bo,et al.  Study of fuel consumption when introducing DME or ethanol into diesel engine , 2006 .

[74]  Jie Chang,et al.  Experimental study for dimethyl ether production from biomass gasification and simulation on dimethyl ether production , 2012 .

[75]  Bengt Johansson,et al.  Study on Combustion Chamber Geometry Effects in an HCCI Engine using High-Speed Cycle-Resolved Chemiluminescence Imaging , 2007 .

[76]  D. Kittelson,et al.  The influence of a cerium additive on ultrafine diesel particle emissions and kinetics of oxidation , 2005 .

[77]  Takehiro Tanaka,et al.  Study on pilot injection of DI diesel engine using common-rail injection system , 2002 .

[78]  Ho Teng,et al.  Viscosity and Lubricity of (Liquid) Dimethyl Ether - An Alternative Fuel for Compression-Ignition Engines , 2002 .

[79]  Hiroyuki Yamada,et al.  Analysis of Reaction Mechanisms Controlling Cool and Thermal Flame with DME Fueled HCCI Engines , 2006 .

[80]  J. Heywood,et al.  Trends in Performance Characteristics of Modern Automobile SI and Diesel Engines , 2009 .

[81]  John Abraham,et al.  An investigation of the effect of changes in engine operating conditions on ignition in an hcci engine , 2004 .

[82]  Development of New 1.6Liter Four Cylinder Turbocharged Direct Injection Gasoline Engine with Intake and Exhaust Valve Timing Control System , 2011 .

[83]  F. Dryer,et al.  Thermal decomposition reaction and a comprehensive kinetic model of dimethyl ether , 2008 .

[84]  D. Cipolat,et al.  Analysis of energy release and NOx emissions of a CI engine fuelled on diesel and DME , 2007 .

[85]  L. Isella,et al.  Diesel-exhaust aerosol dynamics from the tailpipe to the dilution tunnel , 2008 .

[86]  Young Wook Choi,et al.  Performance and emission characteristics of a CI engine operated with n-Butane blended DME fuel , 2011 .

[87]  Ho Teng,et al.  Compression Ignition Delay (Physical + Chemical) of Dimethyl Ether - An Alternative Fuel for Compression-Ignition Engines , 2003 .

[88]  Song-Charng Kong,et al.  Comparisons of Diesel PCCI Combustion Simulations Using a Representative Interactive Flamelet Model and Direct Integration of CFD With Detailed Chemistry , 2007 .

[89]  R. Borup,et al.  Dimethyl ether (DME) as an alternative fuel , 2006 .

[90]  S-H Liu,et al.  Investigation on the regulated and unregulated emissions of a DME engine under different injection timing , 2012 .

[91]  M. Yao,et al.  Multidimensional Numerical Simulation on Dimethyl Ether/Methanol Dual-Fuel Homogeneous Charge Compression Ignition (HCCI) Engine Combustion and Emission Processes , 2007 .

[92]  Paul Kapus,et al.  Reduction of particulate number emissions through calibration methods , 2010 .

[93]  Song-Charng Kong,et al.  A study of natural gas/DME combustion in HCCI engines using CFD with detailed chemical kinetics , 2007 .

[94]  Valeri Golovitchev,et al.  Neat Dimethyl Ether: Is It Really Diesel Fuel of Promise? , 1998 .

[95]  X. Qiao,et al.  Combustion and emission characteristics of a diesel engine fuelled with biodiesel/dimethyl ether blends , 2011 .

[96]  Chunlan Mo,et al.  A Study on Combustion and Emission Characteristics of Small DI Diesel Engine Fuelled with Dimethyl Ether , 2008 .

[97]  Foy G. King,et al.  Comparison of the Particle Size Distribution of Heavy-Duty Diesel Exhaust Using a Dilution Tailpipe Sampler and an In-Plume Sampler during On-Road Operation , 2000, Journal of the Air & Waste Management Association.

[98]  Ho Teng,et al.  Thermodynamic properties of dimethyl ether - : An alternative fuel for compression-ignition engines , 2004 .

[99]  Noboru Miyamoto,et al.  Combustion Control and Operating Range Expansion With Direct Injection of Reaction Suppressors in a Premixed DME HCCI Engine , 2003 .

[100]  M. Yao,et al.  Numerical study of the combustion mechanism of a homogeneous charge compression ignition engine fuelled with dimethyl ether and methane, with a detailed kinetics model. Part 2: the reaction kinetics of dimethyl ether and methane dual-fuel , 2005 .

[101]  J. C. Boettner,et al.  Chemical kinetic study of dimethylether oxidation in a jet stirred reactor from 1 to 10 ATM: Experiments and kinetic modeling , 1996 .

[102]  Seung Hyun Yoon,et al.  Combustion and emission characteristics of DME as an alternative fuel for compression ignition engines with a high pressure injection system , 2008 .

[103]  T. Fujikawa,et al.  Combustion Technology Development for a High Compression Ratio SI Engine , 2011 .

[104]  Eric W. Lemmon,et al.  An Equation of State for the Thermodynamic Properties of Dimethyl Ether , 2011 .

[105]  R. Reitz,et al.  Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .

[106]  M. Yao,et al.  Numerical study of the combustion mechanism of a homogeneous charge compression ignition engine fuelled with dimethyl ether and methane, with a detailed kinetics model , 2005 .

[107]  David B. Kittelson,et al.  Diesel Aerosol Sampling in the Atmosphere , 2000 .

[108]  Mitsuharu Oguma,et al.  Performance of NOX Catalyst in a DI Diesel Engine Operated with Neat Dimethyl Ether , 1999 .

[109]  Mitsuharu Oguma,et al.  NO Emission Characteristics of a CI Engine Fueled with Neat Dimethyl Ether , 1999 .

[110]  M. Canakci,et al.  Effects of injection timing on the engine performance and exhaust emissions of a dual-fuel diesel engine , 2009 .

[111]  C. Bae,et al.  The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review , 2008 .

[112]  Su Han Park,et al.  A study of spray strategies on improvement of engine performance and emissions reduction characteris , 2011 .

[113]  Klaus Schrewe,et al.  Enhancement of Diesel Soot Combustion with Oxygen on Particulate Filters After Injection of Dicyclopentadienyl Iron (Ferrocene) in the Exhaust Pipe , 2011 .

[114]  John M. Simmie,et al.  The oxidation and ignition of dimethylether from low to high temperature (500–1600 K): Experiments and kinetic modeling , 1998 .

[115]  Seung Hyun Yoon,et al.  Effect of Multiple Injection Strategies on the Emission Characteristics of Dimethyl Ether (DME)-Fueled Compression Ignition Engine , 2007 .

[116]  Byungchul Choi,et al.  Effects of mixture stratification on HCCI combustion of DME in a rapid compression and expansion machine , 2009 .

[117]  Takashi Mizutani,et al.  Study on Next Generation Diesel Particulate Filter , 2009 .

[118]  Jan Czerwinski,et al.  Particle Size Distribution Downstream Traps of Different Design , 1995 .

[119]  K. Bencherif,et al.  System Approach for NOx Reduction: Double LNT Diesel After-Treatment Architecture , 2011 .

[120]  Huang Zhen,et al.  Experimental Investigation of Low-Temperature Combustion (LTC) in an Engine Fueled with Dimethyl Ether (DME) , 2009 .

[121]  Tony Collier,et al.  Particulate Matter and Hydrocarbon Emissions Measurements: Comparing First and Second Generation DISI with PFI in Single Cylinder Optical Engines , 2006 .

[122]  M. Tichy,et al.  Experimental Investigation on Catalyst-Heating Strategies and Potential of GDI Combustion Systems , 2008 .

[123]  Wang Ying,et al.  Study on the application of DME/diesel blends in a diesel engine , 2008 .

[124]  Sungwook Park,et al.  Optimization of combustion chamber geometry and engine operating conditions for compression ignition engines fueled with dimethyl ether , 2012 .

[125]  Matthias Kratzsch,et al.  Reducing particulate emissions , 2010 .

[126]  Kwan-Soo Lee,et al.  A study on the reduction of exhaust emissions through HCCI combustion by using a narrow spray angle , 2011 .

[127]  Jiang De-ming,et al.  Study of Performance and Combustion Characteristics of a DME-Fueled Light-Duty Direct-Injection Diesel Engine , 1999 .

[128]  Seungmook Oh,et al.  Performance and emission characteristics of an SI engine operated with DME blended LPG fuel , 2009 .

[129]  Rolf D. Reitz,et al.  An Experimental Investigation of the Effects of Common-Rail Injection System Parameters on Emissions and Performance in a High-Speed Direct-Injection Diesel Engine , 2001 .

[130]  Li Wei,et al.  Effects of DME pilot quantity on the performance of a DME PCCI-DI engine , 2010 .

[131]  Noboru Miyamoto,et al.  Chemical-Kinetic Analysis on PAH Formation Mechanisms of Oxygenated Fuels , 2002 .

[132]  Su Han Park,et al.  Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fuel , 2011 .

[133]  Hiroyuki Yamada,et al.  Simplified Oxidation Mechanism of DME Applicable for Compression Ignition , 2003 .

[134]  Soon-Bark Kwon,et al.  Size-dependent volatility of diesel nanoparticles: chassis dynamometer experiments. , 2003, Environmental science & technology.