CAD-CAM milled dentures: The Geneva protocols for digital dentures.

This technical report describes 2 workflows for fabricating computer-aided design and computer-aided manufacturing (CAD-CAM) milled complete dentures (CDs). The first technique illustrates a manufacturer-independent workflow using conventional clinical steps and a novel, custom modified tray to successfully fabricate CAD-CAM milled CDs. The second technique highlights a nearly digital workflow for manufacturing a CAD-CAM milled CD and a milled resin interim removable partial denture.

[1]  Charles J Goodacre,et al.  Using Intraoral Scanning to Capture Complete Denture Impressions, Tooth Positions, and Centric Relation Records. , 2018, The International journal of prosthodontics.

[2]  Manabu Kanazawa,et al.  Digital impression and jaw relation record for the fabrication of CAD/CAM custom tray. , 2018, Journal of prosthodontic research.

[3]  Albert Mehl,et al.  CAD/CAM milled removable complete dentures: an in vitro evaluation of trueness , 2016, Clinical Oral Investigations.

[4]  H. Dumfahrt,et al.  Influence of CAD/CAM fabrication on denture surface properties , 2018, Journal of oral rehabilitation.

[5]  D. Dickinson,et al.  Comparison of Fit of Dentures Fabricated by Traditional Techniques Versus CAD/CAM Technology. , 2019, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[6]  N Kawahata,et al.  Trial of duplication procedure for complete dentures by CAD/CAM. , 1997, Journal of oral rehabilitation.

[7]  V. Wiedemair,et al.  Do CAD/CAM dentures really release less monomer than conventional dentures? , 2016, Clinical Oral Investigations.

[8]  M. Alammari.  The influence of polishing techniques on pre-polymerized CAD\CAM acrylic resin denture bases , 2017, Electronic physician.

[9]  Frauke Müller,et al.  CAD/CAM milled complete removable dental prostheses: An in vitro evaluation of biocompatibility, mechanical properties, and surface roughness. , 2018, Dental materials journal.

[10]  Erhan Dilber,et al.  Fabricating Complete Dentures with CAD/CAM and RP Technologies. , 2015, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[11]  W. Johnston,et al.  Evaluation of patient experience and satisfaction with CAD-CAM-fabricated complete dentures: A retrospective survey study. , 2016, The Journal of prosthetic dentistry.

[12]  Mathew T Kattadiyil,et al.  Comparison of treatment outcomes in digital and conventional complete removable dental prosthesis fabrications in a predoctoral setting. , 2015, The Journal of prosthetic dentistry.

[13]  Burak Yilmaz,et al.  Use of CAD-CAM technology for the fabrication of complete dentures: An alternative technique. , 2017, The Journal of prosthetic dentistry.

[14]  Ajay Dhingra,et al.  Prospective cohort pilot study of 2-visit CAD/CAM monolithic complete dentures and implant-retained overdentures: Clinical and patient-centered outcomes. , 2016, The Journal of prosthetic dentistry.

[15]  A. Albarrag,et al.  Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures , 2017, The journal of advanced prosthodontics.

[16]  Yong Wang,et al.  Study on CAD&RP for removable complete denture , 2009, Comput. Methods Programs Biomed..

[17]  Brian J Goodacre,et al.  Using Intraoral Scanning to Fabricate Complete Dentures: First Experiences. , 2018, The International journal of prosthodontics.

[18]  M. Srinivasan,et al.  CAD‐CAM milled versus rapidly prototyped (3D‐printed) complete dentures: An in vitro evaluation of trueness , 2019, The Journal of prosthetic dentistry.

[19]  Manabu Kanazawa,et al.  Trial of a CAD/CAM system for fabricating complete dentures. , 2011, Dental materials journal.

[20]  Abdulaziz AlHelal,et al.  Comparison of retention between maxillary milled and conventional denture bases: A clinical study , 2017, The Journal of prosthetic dentistry.

[21]  Sema Murat,et al.  Evaluation of flexural strength and surface properties of prepolymerized CAD/CAM PMMA-based polymers used for digital 3D complete dentures. , 2018, International journal of computerized dentistry.

[22]  Mathew T Kattadiyil,et al.  Comparison of denture base adaptation between CAD-CAM and conventional fabrication techniques. , 2016, The Journal of prosthetic dentistry.

[23]  Burak Yilmaz,et al.  Fabricating complete dentures with CAD/CAM technology. , 2014, The Journal of prosthetic dentistry.

[24]  P. Steinmassl,et al.  CAD/CAM produces dentures with improved fit , 2018, Clinical Oral Investigations.

[25]  Abdulaziz AlHelal,et al.  Clinical complications and quality assessments with computer‐engineered complete dentures: A systematic review , 2017, The Journal of prosthetic dentistry.

[26]  Charles J Goodacre,et al.  A Comparison of the Flexural and Impact Strengths and Flexural Modulus of CAD/CAM and Conventional Heat-Cured Polymethyl Methacrylate (PMMA). , 2018, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[27]  G. McKenna,et al.  CAD/CAM milled removable complete dentures: time and cost estimation study. , 2019, Journal of dentistry.

[28]  Al-Dharrab Ayman.  The residual monomer content and mechanical properties of CAD\CAM resins used in the fabrication of complete dentures as compared to heat cured resins , 2017, Electronic physician.

[29]  B. Yılmaz,et al.  Clinical performance of CAD-CAM-fabricated complete dentures: A cross-sectional study. , 2016, The Journal of prosthetic dentistry.

[30]  Mathew T Kattadiyil,et al.  Errors associated with digital preview of computer-engineered complete dentures and guidelines for reducing them: A technique article. , 2018, The Journal of prosthetic dentistry.

[31]  Van Ramos,et al.  Complete denture fabrication with CAD/CAM record bases. , 2015, The Journal of prosthetic dentistry.

[32]  B Kordass,et al.  Concept and development of a computerized positioning of prosthetic teeth for complete dentures. , 2006, International journal of computerized dentistry.

[33]  M Okada,et al.  A CAD/CAM system for removable denture. Part I: Fabrication of complete dentures. , 1994, The International journal of prosthodontics.

[34]  Manabu Kanazawa,et al.  Evaluation of a complete denture trial method applying rapid prototyping. , 2012, Dental materials journal.

[35]  Avinash S. Bidra,et al.  Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. , 2013, The Journal of prosthetic dentistry.

[36]  Abdulaziz AlHelal,et al.  An update on computer-engineered complete dentures: A systematic review on clinical outcomes. , 2017, The Journal of prosthetic dentistry.

[37]  Chikahiro Ohkubo,et al.  Evaluation of the trueness and tissue surface adaptation of CAD‐CAM mandibular denture bases manufactured using digital light processing , 2018, The Journal of prosthetic dentistry.

[38]  A. Pesqueira,et al.  Effect of thermocycling on hardness, absorption, solubility and colour change of soft liners. , 2012, Gerodontology.

[39]  Marlis Eichberger,et al.  Complete denture fabrication supported by CAD/CAM. , 2016, The Journal of prosthetic dentistry.

[40]  Ebru Nur Baytaroğlu,et al.  A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication , 2016, European journal of dentistry.

[41]  C. Goodacre,et al.  CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data. , 2012, The Journal of prosthetic dentistry.

[42]  Yong-de Zhang,et al.  Kinematics Modeling and Experimentation of the Multi-manipulator Tooth-Arrangement Robot for Full Denture Manufacturing , 2009, Journal of Medical Systems.

[43]  Charles J Goodacre,et al.  Current techniques in CAD/CAM denture fabrication. , 2016, General dentistry.