High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing

[1]  Haidong Wu,et al.  Research into the mechanical properties, sintering mechanism and microstructure evolution of Al2O3-ZrO2 composites fabricated by a stereolithography-based 3D printing method , 2018 .

[2]  J. Canales‐Vázquez,et al.  Fabrication and characterisation of ceramics via low-cost DLP 3D printing , 2017 .

[3]  Jinlong Yang,et al.  Effects of slurry composition on the properties of 3-1 type porous PZT ceramics prepared by ionotropic gelation , 2017 .

[4]  Zhe Zhao,et al.  The effect of the surfactants on the formulation of UV-curable SLA alumina suspension , 2017 .

[5]  Juan Carlos Ruiz-Morales,et al.  Three dimensional printing of components and functional devices for energy and environmental applications , 2017 .

[6]  N. Sha,et al.  Surface modification of α-Al2O3 with dicarboxylic acids for the preparation of UV-curable ceramic suspensions , 2017 .

[7]  O. Lyckfeldt,et al.  Influence of Resin Composition on the Defect Formation in Alumina Manufactured by Stereolithography , 2017, Materials.

[8]  Xuan Song,et al.  Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography , 2016 .

[9]  Alvaro Gil,et al.  Fabrication of ZnO periodic structures by 3D printing , 2016 .

[10]  J. Youngblood,et al.  Additive Manufacturing of Dense Ceramic Parts via Direct Ink Writing of Aqueous Alumina Suspensions , 2016 .

[11]  Frederik Vogeler,et al.  Extrusion-based additive manufacturing of ZrO2 using photoinitiated polymerization , 2016 .

[12]  M. Adams,et al.  DEM analysis of the effect of particle-wall impact on the dispersion performance in carrier-based dry powder inhalers. , 2015, International journal of pharmaceutics.

[13]  E. Rodríguez,et al.  Potencial uso de la tecnología de impresión 3D para el control microestructural de componentes de Pilas de Combustible de Óxidos Sólidos , 2014 .

[14]  Simge Çınar,et al.  Ascorbic acid as a dispersant for concentrated alumina nanopowder suspensions , 2014 .

[15]  Ambrose C. Taylor,et al.  The effects of particle morphology on the analysis of discrete particle dispersion using Delaunay tessellation , 2013 .

[16]  E. Ipp,et al.  DLP-based light engines for additive manufacturing of ceramic parts , 2012, Other Conferences.

[17]  Martin Müller,et al.  Effect of varied powder processing routes on the stabilizing performance and coordination type of polyacrylate in alumina suspensions , 2011 .

[18]  Thierry Chartier,et al.  Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography , 2011 .

[19]  Gary L. Messing,et al.  Aqueous slip casting of transparent yttrium aluminum garnet (YAG) ceramics , 2008 .

[20]  Igor Shishkovsky,et al.  Alumina–zirconium ceramics synthesis by selective laser sintering/melting , 2007 .

[21]  Peter Greil,et al.  Fabrication of Al2O3-based composites by indirect 3D-printing , 2006 .

[22]  John W. Halloran,et al.  Freeform Fabrication of Ceramics via Stereolithography , 2005 .

[23]  H. Kamiya,et al.  Analysis of the action mechanism of polymer dispersant on dense ethanol alumina suspension using colloidal probe AFM , 2005 .

[24]  C. Schilling,et al.  The role of organic dispersants in aqueous alumina suspensions , 2003 .

[25]  Thierry Chartier,et al.  Stereolithography of structural complex ceramic parts , 2002 .

[26]  J. Cesarano,et al.  Processing of Highly Concentrated Aqueous α‐Alumina Suspensions Stabilized with Polyelectrolytes , 1988 .

[27]  Thomas J. Dougherty,et al.  A Mechanism for Non‐Newtonian Flow in Suspensions of Rigid Spheres , 1959 .

[28]  P. Colombo,et al.  Digital light processing of ceramic components from polysiloxanes , 2018 .

[29]  Christina Cie,et al.  Theoretical foundations for ink jet technology , 2015 .

[30]  Zeng Jinzhe.  Effect of particle morphology of Al_2O_3 on gelcasting of ZrO_2/Al_2O_3 ceramics , 2014 .

[31]  Ken'ichi Koseki.  Recent Advanced Ink Jet Printing Technology , 2012 .

[32]  Zhang Bao-hua,et al.  Hyperdispersants and Its Application in the Solid-liqid Suspensions , 2011 .

[33]  Gong Qin-shuang.  Optimization Research on Forming of Fine Alumina Ceramic by Hydrous Gel-casting , 2005 .

[34]  Thierry Chartier,et al.  Ceramic suspensions suitable for stereolithography , 1998 .

[35]  L. Gauckler,et al.  Influence of the Dispersant Structure on Properties of Electrostatically Stabilized Aqueous Alumina , 1997 .

[36]  H. Liao.  Stereolithography using compositions containing ceramic powders , 1997 .