Optical design of freeform two-mirror beam-shaping systems.

The problem of design of a two-mirror optical system for reshaping the irradiance distribution of a laser beam in a prescribed manner is considered in the geometrical optics approximation. The presented design equations are derived in a rigorous manner and are applicable to two-mirror optical systems not limited to radiance profiles and beam cross sections that are rotational or rectangular symmetric. The resulting mirrors are free-form surfaces not restricted by a priori constraints. Moreover, the presented approach shows also that even in the general case two different designs are available for the same data. In one of these designs the first mirror is always concave and the second is convex, while in the second design the resulting mirrors may be neither convex nor concave. Since, in general, the surface mirrors are aspherical, the availability of a design with convex and concave mirrors is particularly important for fabrication.

[1]  D. Gilbarg,et al.  Elliptic Partial Differential Equa-tions of Second Order , 1977 .

[2]  J. W. Ogland,et al.  Mirror system for uniform beam transformation in high-power annular lasers. , 1978, Applied optics.

[3]  W H Southwell,et al.  Reflective optics for irradiance redistribution of laser beams: design. , 1981, Applied optics.

[4]  P H Malyak.  Two-mirror unobscured optical system for reshaping the irradiance distribution of a laser beam. , 1992, Applied optics.

[5]  L. Caffarelli.  Boundary regularity of maps with convex potentials , 1992 .

[6]  Louis A. Romero,et al.  Lossless laser beam shaping , 1996 .

[7]  K Nemoto,et al.  Laser beam intensity profile transformation with a fabricated mirror. , 1997, Applied optics.

[8]  Yann Brenier,et al.  A computational fluid mechanics solution to the Monge-Kantorovich mass transfer problem , 2000, Numerische Mathematik.

[9]  C. M. Jefferson,et al.  Design and performance of a refractive optical system that converts a Gaussian to a flattop beam. , 2000, Applied optics.

[10]  David L. Shealy,et al.  Design and analysis of an elliptical Gaussian laser beam shaping system , 2001, Optics + Photonics.

[11]  Harald Ries,et al.  Tailored freeform optical surfaces. , 2002, Journal of the Optical Society of America. A, Optics, image science, and vision.

[12]  C. M. Jefferson,et al.  Beam shaping with a plano-aspheric lens pair , 2003 .

[13]  D. Shealy,et al.  Geometric optics-based design of laser beam shapers , 2003 .

[14]  V. Oliker.  Mathematical Aspects of Design of Beam Shaping Surfaces in Geometrical Optics , 2003 .

[15]  Vladimir Oliker,et al.  Optical Design of Two-reflector Systems, the Monge-Kantorovich Mass Transfer Problem and Fermat's Principle , 2003 .