Revised NIOSH Lifting Equation May generate spine loads exceeding recommended limits

Abstract The 1991 NIOSH Lifting Equation (NLE) is widely used to assess the risk of injury to spine by providing estimates of the recommended weight limit (RWL) in hands. The present study uses the predictive equations developed based on a detailed trunk musculoskeletal biomechanical model to verify whether the RWL generates L5-S1 loads within the limits (e.g., 3400 N for compression recommended by NIOSH and 1000 N for shear recommended in some studies). Fifty lifting activities are simulated here to evaluate the RWL by the NLE and the L5-S1 loads by the predictive equations. In lifting activities involving moderate to large forward trunk flexion, the estimated RWL generates L5-S1 spine loads exceeding the recommended limits. The NIOSH vertical multiplier is the likely cause of this inadequacy; a revised multiplier accounting for the trunk flexion angle is hence needed. The use of a fixed 3400 N compression limit is also questioned. Relevance to industry Ergonomist and occupational health practitioners are advised to use the NLE along with the predictive equations of the spine loads proposed in this study when evaluating the risk of injury to the spine in lifting activities particularly those involving moderate to large trunk flexion.

[1]  M. Parnianpour,et al.  Trunk biomechanical models based on equilibrium at a single-level violate equilibrium at other levels , 2007, European Spine Journal.

[2]  W. E. Hoogendoorn,et al.  Flexion and Rotation of the Trunk and Lifting at Work Are Risk Factors for Low Back Pain: Results of a Prospective Cohort Study , 2000, Spine.

[3]  Jim R. Potvin.  Comparing the revised NIOSH lifting equation to the psychophysical, biomechanical and physiological criteria used in its development , 2014 .

[4]  R. Norman,et al.  A comparison of peak vs cumulative physical work exposure risk factors for the reporting of low back pain in the automotive industry. , 1998, Clinical biomechanics.

[5]  A Plamondon,et al.  Comparison of trunk muscle forces and spinal loads estimated by two biomechanical models. , 2009, Clinical biomechanics.

[6]  D. Anderson,et al.  Regressions for estimating muscle parameters in the thoracic and lumbar trunk for use in musculoskeletal modeling. , 2012, Journal of biomechanics.

[7]  M. Parnianpour,et al.  Lumbopelvic rhythm during forward and backward sagittal trunk rotations: combined in vivo measurement with inertial tracking device and biomechanical modeling. , 2014, Clinical biomechanics.

[8]  S. Gallagher,et al.  Tolerance of the lumbar spine to shear: a review and recommended exposure limits. , 2012, Clinical biomechanics.

[9]  N Arjmand,et al.  Wrapping of trunk thoracic extensor muscles influences muscle forces and spinal loads in lifting tasks. , 2006, Clinical biomechanics.

[10]  A M Genaidy,et al.  Spinal compression tolerance limits for the design of manual material handling operations in the workplace. , 1993, Ergonomics.

[11]  A. Shirazi-Adl,et al.  Effect of body weight on spinal loads in various activities: a personalized biomechanical modeling approach. , 2015, Journal of biomechanics.

[12]  N Arjmand,et al.  Model and in vivo studies on human trunk load partitioning and stability in isometric forward flexions. , 2006, Journal of biomechanics.

[13]  K. Flegal,et al.  Anthropometric reference data for children and adults: United States, 2003–2006. , 2008, National health statistics reports.

[14]  R W Norman,et al.  A simple polynomial that predicts low-back compression during complex 3-D tasks. , 1996, Ergonomics.

[15]  Jack P Callaghan,et al.  Compressive force magnitude and intervertebral joint flexion/extension angle influence shear failure force magnitude in the porcine cervical spine. , 2012, Journal of biomechanics.

[16]  T. Waters,et al.  Efficacy of the Revised NIOSH Lifting Equation to Predict Risk of Low Back Pain Due to Manual Lifting: Expanded Cross-Sectional Analysis , 2011, Journal of occupational and environmental medicine.

[17]  Babak Bazrgari,et al.  Analysis of squat and stoop dynamic liftings: muscle forces and internal spinal loads , 2007, European Spine Journal.

[18]  Alwin Luttmann,et al.  Critical survey on the biomechanical criterion in the NIOSH method for the design and evaluation of manual lifting tasks , 1999 .

[19]  R. Norman,et al.  Shear Happens! Suggested guidelines for ergonomists to reduce the risk of low back injury from shear loading , 1998 .

[20]  A. Garg,et al.  Epidemiology of low-back pain in industry. , 1992, Occupational medicine.

[21]  S. McGill.  The biomechanics of low back injury: implications on current practice in industry and the clinic. , 1997, Journal of biomechanics.

[22]  L. Claes,et al.  Intradiscal pressure together with anthropometric data--a data set for the validation of models. , 2001, Clinical biomechanics.

[23]  Denys Denis,et al.  Relative importance of expertise, lifting height and weight lifted on posture and lumbar external loading during a transfer task in manual material handling , 2012, Ergonomics.

[24]  A. Nachemson.  Disc Pressure Measurements , 1981, Spine.

[25]  M Parnianpour,et al.  Predictive equations to estimate spinal loads in symmetric lifting tasks. , 2011, Journal of biomechanics.

[26]  Gerd Huber,et al.  Shear strength of the human lumbar spine. , 2012, Clinical biomechanics.

[27]  G. Verbeke,et al.  Risk factors for first-ever low back pain among workers in their first employment. , 2004, Occupational medicine.

[28]  André Plamondon,et al.  Comparative evaluation of six quantitative lifting tools to estimate spine loads during static activities. , 2015, Applied ergonomics.

[29]  Thomas R. Waters,et al.  Efficacy of the Revised NIOSH Lifting Equation to Predict Risk of Low-Back Pain Associated With Manual Lifting , 2014, Hum. Factors.

[30]  Karl F. Orishimo,et al.  Response of trunk muscle coactivation to changes in spinal stability. , 2001, Journal of biomechanics.

[31]  L. Manchikanti.  Epidemiology of low back pain. , 2000, Pain physician.

[32]  William R Taylor,et al.  Lumbar spinal loads vary with body height and weight. , 2013, Medical engineering & physics.

[33]  Andrew S Merryweather,et al.  A revised back compressive force estimation model for ergonomic evaluation of lifting tasks. , 2009, Work.

[34]  Michael Damsgaard,et al.  Analysis of musculoskeletal systems in the AnyBody Modeling System , 2006, Simul. Model. Pract. Theory.

[35]  A Garg,et al.  Revised NIOSH equation for the design and evaluation of manual lifting tasks. , 1993, Ergonomics.

[36]  Silvia A. Pascual,et al.  An Investigation of Ergonomics Analysis Tools Used in Industry in the Identification of Work-Related Musculoskeletal Disorders , 2008, International journal of occupational safety and ergonomics : JOSE.

[37]  K P Granata,et al.  Lumbar-pelvic coordination is influenced by lifting task parameters. , 2000, Spine.

[38]  Thomas R Oxland,et al.  Thoracolumbar spine mechanics contrasted under compression and shear loading , 2002, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[39]  T R Waters,et al.  Accuracy of measurements for the revised NIOSH lifting equation. National Institute for Occupational Safety and Health. , 1998, Applied ergonomics.

[40]  A Plamondon,et al.  A comparative study of two trunk biomechanical models under symmetric and asymmetric loadings. , 2010, Journal of biomechanics.