Machining stability in high-speed drilling—Part 1: Modeling vibration stability in bending

In this work, dynamic models for chatter in drilling are developed that deal with the transverse vibration due to bending, and the axial vibration due to torsion. In the first part, a dynamic model is developed to obtain the limit of stability for the bending vibration mode. The equations of motion are formulated based on a lumped representation of the drill, and the gyroscopic effect due to the rotation of the tool is included. It is shown that, including this gyroscopic effect has a profound effect on the resulting stability lobes, especially at very high speeds; it makes the lobes wider but at the same time lowers the minimum stability boundary. In the second part of this work, a time domain simulation model is developed that combines both bending and torsion modes. This model is verified [1] using experimental cutting tests.

[1]  Fathy Ismail,et al.  Machining stability in high speed drilling—Part 2: Time domain simulation of a bending–torsional model and experimental validations , 2006 .

[2]  Ozan Tekinalp,et al.  Modeling and Finite Element Analysis of Drill Bit Vibrations , 1989 .

[3]  Stephen A. Basile.  Modeling transverse motions of a drill bit for process understanding , 1993 .

[4]  Etsuo Marui,et al.  Chatter Vibration in Drilling , 1988 .

[5]  A. Galip Ulsoy,et al.  Effects of Drill Vibrations on Cutting Forces and Torque , 1994 .

[6]  A. G. Ulsoy,et al.  COMPLEX GEOMETRY, ROTARY INERTIA AND GYROSCOPIC MOMENT EFFECTS ON DRILL VIBRATIONS , 1995 .

[7]  A. Galip Ulsoy,et al.  Dynamic Modeling of Transverse Drill Bit Vibrations , 1984 .

[8]  Etsuo Marui,et al.  Whirling Vibration in Drilling. Part 1: Cause of Vibration and Role of Chisel Edge , 1986 .

[9]  David A. Stephenson,et al.  Process-independent force characterization for metal-cutting simulation , 1997 .

[10]  Diana Maria Rincon,et al.  Coupled force and vibration modeling of drills with complex cross sectional geometries. , 1994 .

[11]  Etsuo Marui,et al.  Suppression of Chatter Vibration in Drilling , 1998 .

[12]  Etsuo Marui,et al.  Whirling Vibration in Drilling. Part 2: Influence of Drill Geometries, Particularly of the Drill Flank, on the Initiation of Vibration , 1986 .

[13]  Etsuo Marui,et al.  Theoretical analysis on chatter vibration in drilling and its suppression , 2003 .

[14]  Ozan Tekinalp,et al.  Effects of Geometric and Process Parameters on Drill Transverse Vibrations , 1988 .

[15]  Ramsey F. Hamade,et al.  Extracting cutting force coefficients from drilling experiments , 2006 .

[16]  Etsuo Marui,et al.  Whirling Vibration in Drilling. Part 3: Vibration Analysis in Drilling Workpiece with a Pilot Hole , 1988 .