Sustainability study of hydrogen pathways for fuel cell vehicle applications

The present work has conducted a comprehensive life-cycle analysis of energy consumption and greenhouse gas (GHG) emission for various fuel/vehicles systems. Focus is placed on the hydrogen-based fuel cell vehicle (FCV) technology, while the gasoline vehicle (GV) equipped with an internal combustion engine (ICE) serves as a reference technology. A fuel-cycle model developed at Argonne National Laboratory, the GREET model, is employed to evaluate the well-to-wheels (WTW) energy and emissions impacts caused by various fuel/vehicle systems. Six potential hydrogen pathways using renewable and non-renewable energy sources are simulated, namely, steam reforming of natural gas and corn ethanol, water electrolysis using grid generation and solar electricity, and coal gasification with and without carbon sequestration. Results showed that the FCVs fuelled with solar electrolysis hydrogen have the greatest benefits in energy conservation and GHG emission reduction. However, by incorporating with the economic consideration, hydrogen from the natural gas reforming is likely to be the primary mode of production for the initial introduction of FCVs.

[1]  Tatsuya Fukushima,et al.  Advances in the Power train System of Honda FCX Clarity Fuel Cell Vehicle , 2009 .

[2]  Jenn-Jiang Hwang,et al.  A complete two-phase model of a porous cathode of a PEM fuel cell , 2007 .

[3]  Jenn-Jiang Hwang,et al.  Review on development and demonstration of hydrogen fuel cell scooters , 2012 .

[4]  James R. Healey.  Fuel-Cell Cars , 2008 .

[5]  Theophilos Ioannides,et al.  Thermodynamic analysis of ethanol processors for fuel cell applications , 2001 .

[6]  Jenn-Jiang Hwang,et al.  Effect of clamping pressure on the performance of a PEM fuel cell , 2007 .

[7]  Xenophon E. Verykios,et al.  Steam reforming of biomass-derived ethanol for the production of hydrogen for fuel cell applications , 2001 .

[8]  Jenn-Jiang Hwang.  Thermal-Electrochemical Modeling of a Proton Exchange Membrane Fuel Cell , 2006 .

[9]  Michael Q. Wang,et al.  The Energy Balance of Corn Ethanol: An Update , 2002 .

[10]  Jenn-Jiang Hwang.  Promotional policy for renewable energy development in Taiwan , 2010 .

[11]  H. S. Huang,et al.  A full fuel-cycle analysis of energy and emissions impacts of transportation fuels produced from natural gas , 2000 .

[12]  Jenn-Jiang Hwang,et al.  Development of a lightweight fuel cell vehicle , 2005 .

[13]  Jenn-Jiang Hwang,et al.  Characteristic study on fuel cell/battery hybrid power system on a light electric vehicle , 2012 .

[14]  Umberto Lucia,et al.  Overview on fuel cells , 2014 .

[15]  Ay Su,et al.  Development of a small vehicular PEM fuel cell system , 2008 .

[16]  Xenophon E. Verykios,et al.  Reaction network of steam reforming of ethanol over Ni-based catalysts , 2004 .

[17]  David Gray,et al.  Polygeneration of SNG, hydrogen, power, and carbon dioxide from Texas lignite , 2004 .

[18]  G. Maggio,et al.  Ethanol steam reforming in a molten carbonate fuel cell: a thermodynamic approach , 1996 .

[19]  M. Wang,et al.  Well-to-wheel energy use and greenhouse gas emissions of advanced fuel/vehicle systems North American analysis. , 2001 .

[20]  K. Fujie,et al.  A demonstration project of the hydrogen station located on Yakushima Island—Operation and analysis of the station , 2007 .

[21]  R. Arjona,et al.  Bio-ethanol steam reforming: Insights on the mechanism for hydrogen production , 2005 .

[22]  Yousef S.H. Najjar,et al.  Protection of the environment by using innovative greening technologies in land transport , 2013 .

[23]  Jenn-Jiang Hwang,et al.  Life-cycle analysis of greenhouse gas emission and energy efficiency of hydrogen fuel cell scooters , 2010 .

[24]  T. Abdel-Baset,et al.  Comments on solid state hydrogen storage systems design for fuel cell vehicles , 2009 .

[25]  Daisie D. Boettner,et al.  Proton exchange membrane (PEM) fuel cell-powered vehicle performance using direct-hydrogen fueling and on-board methanol reforming , 2004 .

[26]  S. Cavallaro,et al.  Ethanol steam reforming on Rh/Al2O3 catalysts , 2000 .

[27]  Alírio E. Rodrigues,et al.  Insight into steam reforming of ethanol to produce hydrogen for fuel cells , 2006 .

[28]  Siew Hwa Chan,et al.  The role of hydrogen and fuel cells to store renewable energy in the future energy network – potentials and challenges , 2014 .

[29]  Ay Su,et al.  Experimental and numerical studies of local current mapping on a PEM fuel cell , 2008 .

[30]  Vicki P. McConnell,et al.  Downsized footprint and material changes for GM's fourth-generation fuel cell technology , 2007 .

[31]  Ottmar Edenhofer,et al.  Technical Summary In: Climate Change 2014: Mitigation of Climate Change. Contribution of Working Group III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Technical Report , 2014 .

[32]  Michael Wang,et al.  Fuel choices for fuel-cell vehicles: well-to-wheels energy and emission impacts , 2002 .

[33]  S. Aso,et al.  Development of Fuel Cell Hybrid Vehicles in TOYOTA , 2007, 2007 Power Conversion Conference - Nagoya.

[34]  Martin Guay,et al.  Control and real-time optimization of an automotive hybrid fuel cell power system , 2009 .

[35]  Fortunato Migliardini,et al.  Hydrogen Fuel Cells for Road Vehicles , 2011 .

[36]  Jenn-Jiang Hwang,et al.  Modeling of two-phase temperatures in a two-layer porous cathode of polymer electrolyte fuel cells , 2007 .

[37]  Jenn-Jiang Hwang.  Sustainable transport strategy for promoting zero-emission electric scooters in Taiwan , 2010 .

[38]  Jenn-Jiang Hwang,et al.  A three-dimensional numerical simulation of the transport phenomena in the cathodic side of a PEMFC , 2004 .