Electrical Sliding Friction Lubricated with Ionic Liquids

Lubrication is one of the most important methods for maintaining and improving the reliability of electric contact components. In view of the conductivity, the lubrication performances of ionic liquids under electric contact have been investigated by using a reciprocating sliding tribometer. Compared with dry friction condition, ionic liquids present an excellent lubrication property. Meanwhile, under the low-load condition, the contact resistance as well as electrical power consumption decreased obviously when lubricated with ionic liquids. And the stronger current strength it is, the higher coefficient and lower contact resistance it shows. The reason could be ascribed to the current-induced fracture of the ion-adsorbed film, especially those in the asperities. And the transformation of the direct contacts, in turn, affects the friction coefficient and contact resistance.

[1]  N. Spencer,et al.  Environmental Influence on the Surface Chemistry of Ionic-Liquid-Mediated Lubrication in a Silica/Silicon Tribopair , 2014 .

[2]  G. Voth,et al.  IONIC LIQUIDS , 2004 .

[3]  R. Bennewitz,et al.  Control of nanoscale friction on gold in an ionic liquid by a potential-dependent ionic lubricant layer. , 2012, Physical review letters.

[4]  Wei Huang,et al.  Ionic liquid lubrication at electrified interfaces , 2016 .

[5]  Kenneth R. Seddon,et al.  Ionic liquids. Green solvents for the future , 2000 .

[6]  S. Chekroud,et al.  Influence of the electrical sliding speed on friction and wear processes in an electrical contact copper–stainless steel , 2004 .

[7]  Bharat Bhushan,et al.  A Review of Ionic Liquids for Green Molecular Lubrication in Nanotechnology , 2010 .

[8]  Laigui Yu,et al.  Room-temperature ionic liquids: a novel versatile lubricant. , 2001, Chemical communications.

[9]  Yi Feng,et al.  Electrical sliding friction and wear properties of Cu–MoS2–graphite–WS2 nanotubes composites in air and vacuum conditions , 2013 .

[10]  Koichiro Sawa,et al.  Effects on contact resistance of passing electrical current through wiping palladium contacts , 1995 .

[11]  C. Dold,et al.  Influence of structural variations on imidazolium‐based ionic liquids , 2013 .

[12]  Wu Guangning,et al.  Experimental research on the friction and wear properties of a contact strip of a pantograph–catenary system at the sliding speed of 350 km/h with electric current , 2015 .

[13]  L. Qiao,et al.  Effect of electrical current on tribological behavior of copper-impregnated metallized carbon against a Cu–Cr–Zr alloy , 2012 .

[14]  Maria Forsyth,et al.  A Review of Ionic Liquid Lubricants , 2013 .

[15]  H. Zaidi,et al.  Metals transfer and oxidation of copper—steel surfaces in electrical sliding contact , 1995 .

[16]  Feng Zhou,et al.  Ionic Liquid Lubricants: Designed Chemistry for Engineering Applications , 2009 .

[17]  Dan Guo,et al.  Lubrication under charged conditions , 2015 .

[18]  Dan Guo,et al.  Nanoconfined ionic liquids under electric fields , 2010 .