Closed-Loop Control of Robotic Arc Welding System with Full-penetration Monitoring

The real-time detection of the state of the gap and weld penetration control are two fundamental issues in robotic arc welding. However, traditional robotic arc welding lacks external information feedback and the function of real-time adjusting. The objective of this research is to adopt new sensing techniques and artificial intelligence to ensure the stability of the welding process through controlling penetration depth and weld pool geometry. A novel arc welding robot system including function modules (visual modules, data acquisition modules) and corresponding software system was developed. Thus, the autonomy and intelligence of the arc welding robot system is realized. Aimed at solving welding penetration depth, a neural network (NN) model is developed to calculate the full penetration state, which is specified by the back-side bead width (Wb), from the top-side vision sensing technique. And then, a versatile algorithm developed to provide robust real-time processing of images for use with a vision-based computer control system is discussed. To this end, the peak current self adaptive regulating controller with weld gap compensation was designed in the robotic arc welding control system. Using this closed-loop control experiments have been conducted to verify the effectiveness of the proposed control system for the robotic arc welding process. The results show that the standard error of the Wb is 0.124 regardless of the variations in the state of the gap.

[1]  Radovan Kovacevic,et al.  Real-Time Image Processing for Monitoring of Free Weld Pool Surface , 1997 .

[2]  Bao Mi,et al.  Implementation of Fiber Phased Array Ultrasound Generation System and Signal Analysis for Weld Penetration Control , 2003 .

[3]  Ingvar Claesson,et al.  On-line quality monitoring in short-circuit gas metal arc welding , 1999 .

[4]  Kang-Yul Bae,et al.  An optical sensing system for seam tracking and weld pool control in gas metal arc welding of steel pipe , 2002 .

[5]  Satoshi Yamane,et al.  Sensing and control of weld pool by fuzzy-neural network in robotic welding system , 2001, IECON'01. 27th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.37243).

[6]  Shan-Ben Chen,et al.  Acquisition of Weld Seam Dimensional Position Information for Arc Welding Robot Based on Vision Computing , 2005, J. Intell. Robotic Syst..

[7]  YuMing Zhang,et al.  Measurement and Analysis of Three-Dimensional Specular Gas Tungsten Arc Weld Pool Surface , 2008 .

[8]  Peter Meer,et al.  Edge Detection with Embedded Confidence , 2001, IEEE Trans. Pattern Anal. Mach. Intell..

[9]  Y. S. Tarng,et al.  A comparison between the back-propagation and counter-propagation networks in the modeling of the TIG welding process , 1998 .

[10]  Jeremy S. Smith,et al.  A novel edge feature correlation algorithm for real-time computer vision-based molten weld pool measurements , 2006 .

[11]  L. Wu,et al.  Self-learning fuzzy neural networks for control of uncertain systems with time delays , 1997, IEEE Trans. Syst. Man Cybern. Part B.

[12]  Chiung-Hsin Tsai,et al.  Fuzzy control of pulsed GTA welds by using real-time root bead image feedback , 2006 .

[13]  I. Charles Ume,et al.  Development of automated real-time data acquisition system for robotic weld quality monitoring , 2002 .

[14]  Kimon P. Valavanis.  Intelligent Robotic Systems: Theory, Design and Applications , 1995, ICCCN.

[15]  Peng Son,et al.  The Joint Optimization of BP Learning Algorithm , 2000 .

[16]  Radovan Kovacevic,et al.  Monitoring of weld joint penetration based on weld pool geometrical appearance , 1996 .

[17]  Giuseppe Casalino,et al.  Deformation prediction and quality evaluation of the gas metal arc welding butt weld , 2003 .

[18]  Jian Wang,et al.  Obtaining weld pool vision information during aluminium alloy TIG welding , 2005 .

[19]  T G Lim,et al.  Estimation of Weld Pool Sizes in GMA Welding Process Using Neural Networks , 1993 .

[20]  G. Karsai,et al.  Artificial neural networks applied to arc welding process modeling and control , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.