论文信息 - An Enhanced Performance PID Filter Controller for First Order Time Delay Processes

An Enhanced Performance PID Filter Controller for First Order Time Delay Processes

An analytical tuning method for a PID controller cascaded with a lead/lag filter is proposed for FOPDT processes based on the IMC design principle. The controller is designed for the rejection of disturbances and a two-degree-of-freedom control structure is used to slacken the overshoot in the set-point response. The simulation study shows that the proposed design method provides better disturbance rejection than the conventional PID design methods when the controllers are tuned to have the same degrees of robustness. A guideline of a single tuning parameter of closed-loop time constant (λ λ λ λ) is provided for several different robustness levels.

Moonyong Lee | M. Shamsuzzoha | Moonyong Lee | M. Shamsuzzoha

[1] D. Seborg,et al. PI/PID controller design based on direct synthesis and disturbance rejection , 2002 .

[2] I-Lung Chien,et al. Simple control method for integrating processes with long deadtime , 2002 .

[3] K.J. ÅSTRÖM,et al. Design of PI Controllers based on Non-Convex Optimization , 1998, Autom..

[4] I-Lung Chien,et al. Consider IMC Tuning to Improve Controller Performance , 1990 .

[5] M. Morari,et al. Internal model control: PID controller design , 1986 .

[6] Sigurd Skogestad,et al. Simple analytic rules for model reduction and PID controller tuning , 2003 .

[7] Aidan O'Dwyer,et al. Handbook of PI and PID controller tuning rules , 2003 .

[8] Evanghelos Zafiriou,et al. Robust process control , 1987 .

[9] Sunwon Park,et al. PID controller tuning for desired closed‐loop responses for SI/SO systems , 1998 .

[10] Richard D. Braatz,et al. Improved Filter Design in Internal Model Control , 1996 .

[11] Ian Postlethwaite,et al. Multivariable Feedback Control: Analysis and Design , 1996 .

[12] William L. Luyben,et al. Effect of derivative algorithm and tuning selection on the PID control of dead-time processes , 2001 .