Experimental Structural Analysis of Hybrid Composite-Concrete Beams by Digital Image Correlation (DIC) and Acoustic Emission (AE)

The use of composites such as textile reinforced cements (TRCs) and fibre reinforced polymers (FRPs) enables the development of lightweight structures. Such a lightweight solution for floor renovation consists of a hybrid composite-concrete cross section: prefabricated beams (TRC–CFRP reinforced hollow boxes with concrete on top) support sandwich panels together with a finishing concrete compression layer creating a monolithic hybrid floor. As the hybrid beams are the main structural element of this floor system, their load-bearing and failure behaviour should be fully understood. In order to examine the optimal design of these structures in terms of load bearing capacity, the beams are separately tested in four point bending while the amount of CFRP reinforcement and the concrete thickness are varied. The digital image correlation (DIC) and acoustic emission (AE) measuring techniques are applied in a complimentary way to monitor the bending and failure behaviour of the full scale hybrid beams. DIC visualises the development of surface strain fields together with the exact cracking patterns in relation to the applied load. AE contributes in defining the load at the onset of serious cracking activity. Furthermore, AE characterizes the contribution of the different fracture modes that may vary from concrete cracking, delamination between the successive layers of the TRC or debonding at the interphase between the TRC hollow box and the concrete on the one hand and the CFRP on the other hand.

[1]  Fernando A. Branco,et al.  Flexural behaviour of GFRP-concrete hybrid beams with interconnection slip , 2007 .

[2]  P. Hamelin,et al.  Identifying the contributing mechanisms of textile reinforced concrete (TRC) in the case of shear repairing damaged and reinforced concrete beams , 2013 .

[3]  Stéphane Avril,et al.  A full-field optical method for the experimental analysis of reinforced concrete beams repaired with composites , 2004 .

[4]  Raafat El-Hacha,et al.  Behaviour of hybrid FRP–UHPC beams subjected to static flexural loading , 2012 .

[5]  D. Aggelis,et al.  Use of Digital Image Correlation (DIC) and Acoustic Emission (AE) to characterise the structural behaviour of hybrid composite-concrete beams , 2015 .

[6]  A. Pollock.  Acoustic emission - 2: Acoustic emission amplitudes , 1973 .

[7]  Jan Wastiels,et al.  Development and experimental validation of a lightweight Stay-in-Place composite formwork for concrete beams , 2014 .

[8]  Hubert W. Schreier,et al.  Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts,Theory and Applications , 2009 .

[9]  Michael N. Fardis,et al.  fib Bulletin 35. Retrofitting of concrete structures by externally bonded FRPs with emphasis on seismic applications , 2006 .

[10]  Jan Wastiels,et al.  TRC or CFRP strengthening for reinforced concrete beams: An experimental study of the cracking behaviour , 2014 .

[11]  A W Beeby,et al.  CONCISE EUROCODE FOR THE DESIGN OF CONCRETE BUILDINGS. BASED ON BSI PUBLICATION DD ENV 1992-1-1: 1992. EUROCODE 2: DESIGN OF CONCRETE STRUCTURES. PART 1: GENERAL RULES AND RULES FOR BUILDINGS , 1993 .

[12]  Wolfgang Brameshuber,et al.  State-of-the-Art report of RILEM Technical Committee TC 201-TRC 'Textile Reinforced Concrete' , 2006 .

[13]  Tomoki Shiotani,et al.  Damage evaluation of railway structures by using train-induced AE , 2003 .

[14]  M. Ohtsu.  Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete* Test method for classification of active cracks in concrete structures by acoustic emission , 2010 .

[15]  Emre Ercan,et al.  Effect of CFRP-spacing on fracture mechanism of CFRP-strengthened reinforced concrete beam identified by AE-SiGMA , 2014 .

[16]  A. Vautrin,et al.  Mechanical behavior of RC beams reinforced by externally bonded CFRP sheets , 2003 .

[17]  João R. Correia,et al.  GFRP–concrete hybrid cross-sections for floors of buildings , 2009 .

[18]  P. Singla,et al.  A probabilistic approach for damage identification and crack mode classification in reinforced concrete structures , 2013 .

[19]  D. Aggelis.  Classification of cracking mode in concrete by acoustic emission parameters , 2011 .

[20]  Thomas Vogel,et al.  Acoustic emission for monitoring a reinforced concrete beam subject to four-point-bending , 2007 .

[21]  Theodore E. Matikas,et al.  Monitoring of the fracture mechanisms induced by pull-out and compression in concrete , 2014 .

[22]  Yoshinobu Oshima,et al.  Temporal and spatial evaluation of grout failure process with PC cable breakage by means of acoustic emission , 2013 .