Alternative architectures and materials for PEMFC gas diffusion layers: A review and outlook

[1]  Zhengping Zhang,et al.  Ultraviolet-Induced Bi-gradient Gas Diffusion Electrode for High-Performance Fuel Cells , 2022, Industrial & Engineering Chemistry Research.

[2]  Junhong Jin,et al.  A review of the microporous layer in proton exchange membrane fuel cells: Materials and structural designs based on water transport mechanism , 2022, Renewable and Sustainable Energy Reviews.

[3]  M. Pourkashanian,et al.  Effect of composition and structure of gas diffusion layer and microporous layer on the through‐plane gas permeability of PEFC porous media , 2021, International Journal of Energy Research.

[4]  Z. Qu,et al.  Liquid water transport and mechanical performance of electrospun gas diffusion layers , 2021, International Journal of Green Energy.

[5]  S. Yamaguchi,et al.  Managing the Pore Morphologies of Microporous Layers for Polymer Electrolyte Fuel Cells with a Solvent-Free Coating Technique , 2021 .

[6]  J. Yi,et al.  Unveiling water drainage through microporous layer with laser-ablated open furrows in proton exchange membrane fuel cells , 2021 .

[7]  Youngjin Jeong,et al.  Carbon nanotube sheet as a microporous layer for proton exchange membrane fuel cells , 2021, Energy.

[8]  Yu Li,et al.  Effect of the porosity distribution on the liquid water transport in the gas diffusion layer of PEMFC , 2021 .

[9]  B. Hatton,et al.  Degradation Characteristics of Electrospun Gas Diffusion Layers with Custom Pore Structures for Polymer Electrolyte Membrane Fuel Cells. , 2021, ACS applied materials & interfaces.

[10]  Xiangyang Zhou,et al.  Recent progress of the gas diffusion layer in proton exchange membrane fuel cells: Material and structure designs of microporous layer , 2020 .

[11]  Sukumar Pati,et al.  Numerical investigation of multi-layered porosity in the gas diffusion layer on the performance of a PEM fuel cell , 2020 .

[12]  C. Roth,et al.  Porous electrospun carbon nanofibers network as an integrated electrode@gas diffusion layer for high temperature polymer electrolyte membrane fuel cells , 2020, Electrochimica Acta.

[13]  Hee‐Tak Kim,et al.  Ditch-structured microporous layers fabricated by nanosecond-pulse laser ablation for enhancing water transport in polymer electrolyte membrane fuel cells , 2020, Materials Advances.

[14]  R. Lin,et al.  Microporous layers with different decorative pattern for polymer electrolyte membrane fuel cells. , 2020, ACS applied materials & interfaces.

[15]  I. Manke,et al.  Influence of Structural Modification of Micro‐Porous Layer and Catalyst Layer on Performance and Water Management of PEM Fuel Cells: Hydrophobicity and Porosity , 2020, Fuel Cells.

[16]  M. Sansotera,et al.  Innovative Perfluoropolyether‐Functionalized Gas Diffusion Layers with Enhanced Performance in Polymer Electrolyte Membrane Fuel Cells , 2020, Fuel Cells.

[17]  G. Dotelli,et al.  Characterization of novel graphene-based microporous layers for Polymer Electrolyte Membrane Fuel Cells operating under low humidity and high temperature , 2020 .

[18]  B. Hatton,et al.  Designing Tailored Gas Diffusion Layers with Pore Size Gradients via Electrospinning for Polymer Electrolyte Membrane Fuel Cells , 2020 .

[19]  S. Dhakate,et al.  Multiwall carbon nanotubes tailored porous carbon fiber paper-based gas diffusion layer performance in polymer electrolyte membrane fuel cell , 2019, Renewable Energy.

[20]  Xianguo Li,et al.  A review of gas diffusion layers for proton exchange membrane fuel cells—With a focus on characteristics, characterization techniques, materials and designs , 2019, Progress in Energy and Combustion Science.

[21]  Yun Wang,et al.  Two-phase flow and oxygen transport in the perforated gas diffusion layer of proton exchange membrane fuel cell , 2019, International Journal of Heat and Mass Transfer.

[22]  A. Bazylak,et al.  Pore-Scale Liquid Water Visualization for Understanding Water Transport in Operating Fuel Cells , 2019, ECS Transactions.

[23]  D. Brett,et al.  The effect of non-uniform compression and flow-field arrangements on membrane electrode assemblies - X-ray computed tomography characterisation and effective parameter determination , 2019, Journal of Power Sources.

[24]  D. Wilkinson,et al.  Graphene and reduced graphene oxide based microporous layers for high-performance proton-exchange membrane fuel cells under varied humidity operation , 2019, Journal of Power Sources.

[25]  C. Badini,et al.  Electrical and Thermal Conductivity of Epoxy-Carbon Filler Composites Processed by Calendaring , 2019, Materials.

[26]  P. Shearing,et al.  X-ray tomography and modelling study on the mechanical behaviour and performance of metal foam flow-fields for polymer electrolyte fuel cells , 2019, International Journal of Hydrogen Energy.

[27]  Mira Park,et al.  Preparation and characterization of carbon black/pitch-based carbon fiber paper composites for gas diffusion layers , 2019, Composites Part B: Engineering.

[28]  Alexey G. Klechikov,et al.  Fabrication of microporous layer – free hierarchical gas diffusion electrode as a low Pt-loading PEMFC cathode by direct growth of helical carbon nanofibers , 2018, RSC advances.

[29]  W. Tao,et al.  Influences of the perforation on effective transport properties of gas diffusion layers , 2018, International Journal of Heat and Mass Transfer.

[30]  D. S. Khaerudini,et al.  Properties and Performance of Gas Diffusion Layer PEMFC Derived from Coconut Coir , 2018, Journal of Engineering and Technological Sciences.

[31]  P. Shearing,et al.  Characterisation of the diffusion properties of metal foam hybrid flow-fields for fuel cells using optical flow visualisation and X-ray computed tomography , 2018, Journal of Power Sources.

[32]  Yutaka Tabe,et al.  Analysis of Water Transport inside Hydrophilic Carbon Fiber Micro-Porous Layers with High-Performance Operation in PEFC , 2018 .

[33]  K. Sundmacher,et al.  Enhancing PEM water electrolysis efficiency by reducing the extent of Ti gas diffusion layer passivation , 2018, Journal of Applied Electrochemistry.

[34]  Xianguo Li,et al.  Assessment of graphene as an alternative microporous layer material for proton exchange membrane fuel cells , 2018 .

[35]  Rui Chen,et al.  The effects of gas diffusion layers structure on water transportation using X-ray computed tomography based Lattice Boltzmann method , 2018 .

[36]  H. Gasteiger,et al.  Impact of Microporous Layer Pore Properties on Liquid Water Transport in PEM Fuel Cells: Carbon Black Type and Perforation , 2017 .

[37]  Shubo Wang,et al.  Laser-perforated gas diffusion layer for promoting liquid water transport in a proton exchange membrane fuel cell , 2017 .

[38]  Giovanni Dotelli,et al.  Performance Evaluation and Durability Enhancement of FEP-Based Gas Diffusion Media for PEM Fuel Cells , 2017 .

[39]  H. Matsumoto,et al.  Carbon black / PTFE composite hydrophobic gas diffusion layers for a water-absorbing porous electrolyte electrolysis cell , 2017 .

[40]  B. Shabani,et al.  Gas diffusion layer modifications and treatments for improving the performance of proton exchange membrane fuel cells and electrolysers: A review , 2017 .

[41]  S. Dhakate,et al.  Upshot of natural graphite inclusion on the performance of porous conducting carbon fiber paper in a polymer electrolyte membrane fuel cell , 2017 .

[42]  R. Asmatulu,et al.  Superhydrophobic PAN nanofibers for gas diffusion layers of proton exchange membrane fuel cells for cathodic water management , 2017, International Journal of Hydrogen Energy.

[43]  Yutaka Tabe,et al.  Analysis of Oxygen Transport Resistance Components and Water Transport Phenomena with Hydrophilic and Hydrophobic MPL in PEFC , 2017 .

[44]  I. Eroglu,et al.  Facilitation of water management in low Pt loaded PEM fuel cell by creating hydrophobic microporous layer with PTFE, FEP and PDMS polymers: Effect of polymer and carbon amounts , 2017 .

[45]  S. Ghobadi,et al.  Green composite papers via use of natural binders and graphene for PEM fuel cell electrodes , 2017 .

[46]  Paul R. Shearing,et al.  Investigation of Hot Pressed Polymer Electrolyte Fuel Cell Assemblies via X-ray Computed Tomography , 2017 .

[47]  Arunkumar Jayakumar,et al.  Manufacturing the Gas Diffusion Layer for PEM Fuel Cell Using a Novel 3D Printing Technique and Critical Assessment of the Challenges Encountered , 2017, Materials.

[48]  B. Hatton,et al.  Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part II. In operando synchrotron imaging for microscale liquid water transport characterization , 2017 .

[49]  B. Hatton,et al.  Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part I. Fabrication, morphological characterization, and in situ performance , 2017 .

[50]  S. Iordache,et al.  Carbon xerogel as gas diffusion layer in PEM fuel cells , 2017 .

[51]  M. Ishida,et al.  Application of a self-supporting microporous layer to gas diffusion layers of proton exchange membrane fuel cells , 2017 .

[52]  Lin Ma,et al.  Through-plane gas permeability of gas diffusion layers and microporous layer: Effects of carbon loading and sintering , 2017 .

[53]  S. A. Gürsel,et al.  Flexible carbon–cellulose fiber-based composite gas diffusion layer for polymer electrolyte membrane fuel cells , 2017 .

[54]  T. Tanuma,et al.  Effect of Properties of Hydrophilic Microporous Layer (MPL) on PEFC Performance , 2016 .

[55]  Oluwadamilola O. Taiwo,et al.  Effect of gas diffusion layer properties on water distribution across air-cooled, open-cathode polymer electrolyte fuel cells: A combined ex-situ X-ray tomography and in-operando neutron imaging study , 2016 .

[56]  D. Wilkinson,et al.  Electrochemically Produced Graphene for Microporous Layers in Fuel Cells. , 2016, ChemSusChem.

[57]  A. Zulfia,et al.  Preparation of carbon composite from coconut fiber for gas diffusion layer , 2016, Ionics.

[58]  Min Jeong Kim,et al.  Morphological Study of Directionally Freeze-Cast Nickel Foams , 2016 .

[59]  A. Bazylak,et al.  Balancing mass transport resistance and membrane resistance when tailoring microporous layer thickness for polymer electrolyte membrane fuel cells operating at high current densities , 2016 .

[60]  A. Bottino,et al.  Microporous layers based on poly(vinylidene fluoride) and sulfonated poly(vinylidene fluoride) , 2015 .

[61]  Yutaka Tabe,et al.  Effect of Hydrophilic Micro-Porous Layer Structure on Microscopic Water Distribution and Cell Performance in PEFC , 2015 .

[62]  James R. Waldecker,et al.  Influence of MPL Structure Modification on Fuel Cell Oxygen Transport Resistance , 2015 .

[63]  D. Wilkinson,et al.  Novel Graphene Foam Microporous Layers for PEM Fuel Cells: Interfacial Characteristics and Comparative Performance , 2015 .

[64]  G. Dotelli,et al.  Development and Characterization of Non-Conventional Micro-Porous Layers for PEM Fuel Cells , 2015 .

[65]  Yohann R. J. Thomas,et al.  New Method for Super Hydrophobic Treatment of Gas Diffusion Layers for Proton Exchange Membrane Fuel Cells Using Electrochemical Reduction of Diazonium Salts. , 2015, ACS applied materials & interfaces.

[66]  Min‐Hsing Chang,et al.  Effect of microporous layer composed of carbon nanotube and acetylene black on polymer electrolyte membrane fuel cell performance , 2015 .

[67]  M. Toyoda,et al.  Material Processing of Bamboo for Use as a Gas Diffusion Layer in Proton Exchange Membrane Fuel Cells , 2015 .

[68]  Chien-Hsun Wang,et al.  Effect of conductive carbon material content and structure in carbon fiber paper made from carbon felt on the performance of a proton exchange membrane fuel cell , 2015 .

[69]  M. Toyoda,et al.  Preparation of carbonaceous fiber sheets derived from bamboo and application to gas diffusion layer of proton exchange membrane fuel cells , 2015 .

[70]  P. Cañizares,et al.  Improving of Micro Porous Layer based on Advanced Carbon Materials for High Temperature Proton Exchange Membrane Fuel Cell Electrodes , 2015 .

[71]  Yang Li,et al.  A CNT (carbon nanotube) paper as cathode gas diffusion electrode for water management of passive μ-DMFC (micro-direct methanol fuel cell) with highly concentrated methanol , 2015 .

[72]  Bo Ki Hong,et al.  High performance gas diffusion layer with hydrophobic nanolayer under a supersaturated operation condition for fuel cells. , 2015, ACS applied materials & interfaces.

[73]  K. Hsueh,et al.  Enhancement of proton exchange membrane fuel cell performance by titanium-coated anode gas diffusion layer , 2014 .

[74]  N. Djilali,et al.  A new model for thermal contact resistance between fuel cell gas diffusion layers and bipolar plates , 2014 .

[75]  Young Dok Kim,et al.  Controlled water flooding of polymer electrolyte fuel cells applying superhydrophobic gas diffusion layer , 2014 .

[76]  Giovanni Dotelli,et al.  Perfluoropolyether-functionalized gas diffusion layers for proton exchange membrane fuel cells , 2014 .

[77]  B. Yi,et al.  Improvement of the proton exchange membrane fuel cell (PEMFC) performance at low-humidity conditions by exposing anode in Ultraviolet light , 2014 .

[78]  Yung-Eun Sung,et al.  Next-generation polymer-electrolyte-membrane fuel cells using titanium foam as gas diffusion layer. , 2014, ACS applied materials & interfaces.

[79]  G. Dotelli,et al.  Novel superhydrophobic microporous layers for enhanced performance and efficient water management in PEM fuel cells , 2014 .

[80]  Hironori Nakajima,et al.  Triple microporous layer coated gas diffusion layer for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions , 2014 .

[81]  D. Ingham,et al.  The in-plane thermal conductivity and the contact resistance of the components of the membrane electrode assembly in proton exchange membrane fuel cells , 2013 .

[82]  I. Manke,et al.  Synchrotron radiography and tomography of water transport in perforated gas diffusion media , 2013 .

[83]  S. Hirai,et al.  Effect of Perforation Structure of Cathode GDL on Liquid Water Removal in PEFC , 2013 .

[84]  I. Manke,et al.  Self-Supporting Microporous Layers (MPLs) for PEM Fuel Cells , 2013 .

[85]  B. Pollet,et al.  Optimization of gas diffusion electrode for polybenzimidazole-based high temperature proton exchange membrane fuel cell: Evaluation of polymer binders in catalyst layer , 2013 .

[86]  A. Pfrang,et al.  X-ray computed tomography of gas diffusion layers of PEM fuel cells: Segmentation of the microporous layer , 2013 .

[87]  M. Morishita,et al.  Novel hydrophilic and hydrophobic double microporous layer coated gas diffusion layer to enhance performance of polymer electrolyte fuel cells under both low and high humidity , 2013 .

[88]  Ingo Manke,et al.  The influence of porous transport layer modifications on the water management in polymer electrolyte membrane fuel cells , 2013 .

[89]  Seongyop Lim,et al.  Effects of the microstructure and powder compositions of a micro-porous layer for the anode on the performance of high concentration methanol fuel cell , 2013 .

[90]  Aimy Bazylak,et al.  Synchrotron X-ray radiographic investigations of liquid water transport behavior in a PEMFC with MPL-coated GDLs , 2013 .

[91]  Min‐Hsing Chang,et al.  Effect of Gas Diffusion Layer With Double-Side Microporous Layer Coating on Polymer Electrolyte Membrane Fuel Cell Performance , 2013 .

[92]  P. Kauranen,et al.  Durability of carbon nanofiber (CNF) & carbon nanotube (CNT) as catalyst support for Proton Exchange Membrane Fuel Cells , 2013 .

[93]  T. Schubert,et al.  Enhancement of proton exchange membrane fuel cell performance by doping microporous layers of gas diffusion layers with multiwall carbon nanotubes , 2012 .

[94]  Bruno G. Pollet,et al.  Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells , 2012 .

[95]  J. Yablecki,et al.  Determining the effective thermal conductivity of compressed PEMFC GDLs through thermal resistance modelling , 2012 .

[96]  Bo Ki Hong,et al.  Water condensation behavior on the surface of a network of superhydrophobic carbon fibers with high-aspect-ratio nanostructures , 2012 .

[97]  Arunachala Mada Kannan,et al.  Characterization techniques for gas diffusion layers for proton exchange membrane fuel cells: A review , 2012 .

[98]  Wei Yuan,et al.  Porous metal materials for polymer electrolyte membrane fuel cells – A review , 2012 .

[99]  S. Turri,et al.  Investigation of hydrophobic treatments with perfluoropolyether derivatives of gas diffusion layers by electrochemical impedance spectroscopy in PEM-FC , 2012 .

[100]  Heinrich Riesemeier,et al.  Visualization of the water distribution in perforated gas diffusion layers by means of synchrotron X-ray radiography , 2012 .

[101]  Jong-Won Lee,et al.  A review of gas diffusion layer in PEM fuel cells: Materials and designs , 2012 .

[102]  Tetsuya Yoshida,et al.  Effect of titanium powder loading in gas diffusion layer of a polymer electrolyte unitized reversible fuel cell , 2012 .

[103]  J. Shim,et al.  Preparation and Characterization for Carbon Composite Gas Diffusion Layer on Polymer Electrolyte Membrane Fuel Cells , 2012 .

[104]  Ho-Young Jung,et al.  Development of supported bifunctional oxygen electrocatalysts and corrosion-resistant gas diffusion layer for unitized regenerative fuel cell applications , 2012 .

[105]  C. Bianchi,et al.  Peroxidic Perfluoropolyether for the Covalent Binding of Perfluoropolyether Chains on Carbon Black Surface , 2011 .

[106]  Bruno G. Pollet,et al.  A novel method for preparing proton exchange membrane fuel cell electrodes by the ultrasonic-spray technique , 2011 .

[107]  H. Nakajima,et al.  Hydrophilic and Hydrophobic Double MPL Coated GDL to Enhance PEFC Performance under Low and High Humidity Conditions , 2011 .

[108]  Giovanni Dotelli,et al.  Surface treatments with perfluoropolyether derivatives for the hydrophobization of gas diffusion lay , 2011 .

[109]  Xianguo Li,et al.  Measurement of in-plane thermal conductivity of carbon paper diffusion media in the temperature range of −20°C to +120°C , 2011 .

[110]  Qiang Zhang,et al.  Superstrong Ultralong Carbon Nanotubes for Mechanical Energy Storage , 2011, Advanced materials.

[111]  F. Marone,et al.  Progress in In Situ X-Ray Tomographic Microscopy of Liquid Water in Gas Diffusion Layers of PEFC , 2011 .

[112]  M. Mench,et al.  Laser perforated fuel cell diffusion media. Part I: Related changes in performance and water content , 2011 .

[113]  Eunsook Lee,et al.  Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas di , 2011 .

[114]  Zhe Tang,et al.  In situ grown carbon nanotubes on carbon paper as integrated gas diffusion and catalyst layer for proton exchange membrane fuel cells , 2011 .

[115]  Huan-Ruei Shiu,et al.  Optimization of polytetrafluoroethylene content in cathode gas diffusion layer by the evaluation of , 2011 .

[116]  Huamin Zhang,et al.  Poly(vinylidene fluoride) based anion conductive ionomer as a catalyst binder for application in anion exchange membrane fuel cell , 2011 .

[117]  Takemi Chikahisa,et al.  Performance and liquid water distribution in PEFCs with different anisotropic fiber directions of th , 2011 .

[118]  Yong Wang,et al.  Design of graphene sheets-supported Pt catalyst layer in PEM fuel cells , 2011 .

[119]  Biao Wang,et al.  Fabrication of a carbon nanofiber sheet as a micro-porous layer for proton exchange membrane fuel cells , 2010 .

[120]  R. Schweiss,et al.  Mitigation of Water Management in PEM Fuel Cell Cathodes by Hydrophilic Wicking Microporous Layers , 2010 .

[121]  Xianguo Li,et al.  Fabrication of Hydrophobic Coating on GDL with Silicone Based Materials , 2010 .

[122]  Ki Tae Park,et al.  Determination of the pore size distribution of micro porous layer in PEMFC using pore forming agents under various drying conditions , 2010 .

[123]  Thomas W. Tighe,et al.  Water Transport Mechanisms in PEMFC Gas Diffusion Layers , 2010 .

[124]  H. Gharibi,et al.  The synergy between multi-wall carbon nanotubes and Vulcan XC72R in microporous layers , 2010 .

[125]  D. Gerteisen,et al.  Stability and performance improvement of a polymer electrolyte membrane fuel cell stack by laser perforation of gas diffusion layers , 2010 .

[126]  A. Weber.  Improved modeling and understanding of diffusion-media wettability on polymer-electrolyte-fuel-cell performance , 2010 .

[127]  M. Zhang,et al.  Improved properties of carbon fiber paper as electrode for fuel cell by coating pyrocarbon via CVD method , 2010 .

[128]  D. Jacobson,et al.  Effect of Hydrophilic Treatment of Microporous Layer on Fuel Cell Performance , 2010 .

[129]  D. Ingham,et al.  Effect of polytetrafluoroethylene-treatment and microporous layer-coating on the electrical conductivity of gas diffusion layers used in proton exchange membrane fuel cells , 2010 .

[130]  Giovanni Dotelli,et al.  Characterisation of Nanocarbon‐Based Gas Diffusion Media by Electrochemical Impedance Spectroscopy , 2010 .

[131]  Sheng Wang,et al.  Carbon nanotubes based gas diffusion layers in direct methanol fuel cells , 2010 .

[132]  Zhong‐sheng Liu,et al.  Experimental measurements of effective diffusion coefficient of oxygen–nitrogen mixture in PEM fuel cell diffusion media , 2010 .

[133]  Yuh-Shan Ho,et al.  Gas diffusion layer for proton exchange membrane fuel cells—A review , 2009 .

[134]  A. Kannan,et al.  Development of carbon nanotubes based gas diffusion layers by in situ chemical vapor deposition process for proton exchange membrane fuel cells , 2009 .

[135]  Tse-Hao Ko,et al.  Effect of hydrophobic gas diffusion layers on the performance of the polymer exchange membrane fuel cell , 2009 .

[136]  Jin Hyun Nam,et al.  Microporous layer for water morphology control in PEMFC , 2009 .

[137]  Sungjin Kim,et al.  Fabrication of GDL microporous layer using PVDF for PEMFCs , 2009 .

[138]  E. Antolini.  Carbon supports for low-temperature fuel cell catalysts , 2009 .

[139]  G. Yin,et al.  Gold‐plated Ni mesh as the gas diffusion medium for air‐breathing direct methanol fuel cell , 2009 .

[140]  Tero Hottinen,et al.  Modeling of Polymer Electrolyte Membrane Fuel Cell Stack End Plates , 2008 .

[141]  Mark A. Locascio,et al.  Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements. , 2008, Nature nanotechnology.

[142]  A. Bottino,et al.  Effect of preparative parameters on the characteristic of poly(vinylidene fluoride)-based microporous layer for proton exchange membrane fuel cells , 2008 .

[143]  Tse-Hao Ko,et al.  Effect of carbon black concentration in carbon fiber paper on the performance of low-temperature proton exchange membrane fuel cells , 2008 .

[144]  Christoph Ziegler,et al.  Enhancing liquid water transport by laser perforation of a GDL in a PEM fuel cell , 2008 .

[145]  P. Cañizares,et al.  Influence of the Teflon loading in the gas diffusion layer of PBI-based PEM fuel cells , 2008 .

[146]  N. Nicoloso,et al.  Design of gas diffusion electrodes using nanocarbon , 2008 .

[147]  Suresh G. Advani,et al.  Performance of a metallic gas diffusion layer for PEM fuel cells , 2008 .

[148]  Wei-Mon Yan,et al.  Effects of fabrication processes and material parameters of GDL on cell performance of PEM fuel cell , 2007 .

[149]  Lei Zhang,et al.  A review of heat-treatment effects on activity and stability of PEM fuel cell catalysts for oxygen reduction reaction , 2007 .

[150]  Y. Chen-Yang,et al.  Novel single-layer gas diffusion layer based on PTFE/carbon black composite for proton exchange membrane fuel cell , 2007 .

[151]  S. Litster,et al.  Active Water Management for PEM Fuel Cells , 2007 .

[152]  K. S. Dhathathreyan,et al.  Effect of PTFE Content in Gas Diffusion Media and Microlayer on the Performance of PEMFC Tested under Ambient Pressure , 2007 .

[153]  A. Kannan,et al.  Carbon nano-chain and carbon nano-fibers based gas diffusion layers for proton exchange membrane fuel cells , 2007 .

[154]  D. Ingham,et al.  A computational fluid dynamics analysis of a PEM fuel cell system for power generation , 2007 .

[155]  Jenn-Jiang Hwang,et al.  Effect of clamping pressure on the performance of a PEM fuel cell , 2007 .

[156]  Mu Pan,et al.  Porosity-graded micro-porous layers for polymer electrolyte membrane fuel cells , 2007 .

[157]  Chaoyang Wang,et al.  Elucidating differences between carbon paper and carbon cloth in polymer electrolyte fuel cells , 2007 .

[158]  Z. Mao,et al.  Titanium substrate based micro-PEMFC operating under ambient conditions , 2007 .

[159]  Suresh G. Advani,et al.  Metal foams as flow field and gas diffusion layer in direct methanol fuel cells , 2007 .

[160]  B. Popov,et al.  Effect of carbon loading in microporous layer on PEM fuel cell performance , 2006 .

[161]  Jianlu Zhang,et al.  A bi-functional micro-porous layer with composite carbon black for PEM fuel cells , 2006 .

[162]  M. Fowler,et al.  In-plane and through-plane gas permeability of carbon fiber electrode backing layers , 2006 .

[163]  T. L. Dhami,et al.  Processing of carbon composite paper as electrode for fuel cell , 2006 .

[164]  Hsin-Fu Huang,et al.  CF4 plasma treatment for preparing gas diffusion layers in membrane electrode assemblies , 2006 .

[165]  J. Adin Mann,et al.  Characterization of transport properties in gas diffusion layers for proton exchange membrane fuel cells: 1. Wettability (internal contact angle to water and surface energy of GDL fibers) , 2006 .

[166]  M. Itkis,et al.  Carbon nanotube free-standing membrane as gas diffusion layer in hydrogen fuel cells , 2006 .

[167]  K. Okazaki,et al.  Micromachined Metallic Thin Films for the Gas Diffusion Layer of PEFCs , 2006 .

[168]  Hossein Toghiani,et al.  Investigation of water transport through membrane in a PEM fuel cell by water balance experiments , 2006 .

[169]  Xiaoping Ma,et al.  Bifunctional oxygen electrode with corrosion-resistive gas diffusion layer for unitized regenerative fuel cell , 2006 .

[170]  Vijay Modi,et al.  Micromachined silicon structures for free-convection PEM fuel cells , 2005 .

[171]  N. Islam,et al.  Improving the Performance of a PEMFC with Ketjenblack EC-600JD Carbon Black as the Material of the Microporous Layer , 2005 .

[172]  Chao-Yang Wang,et al.  Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell , 2004 .

[173]  M. Hori,et al.  Novel gas diffusion layer with water management function for PEMFC , 2004 .

[174]  Chang-Soo Kim,et al.  Effect of PTFE contents in the gas diffusion media on the performance of PEMFC , 2004 .

[175]  Tsutomu Ioroi,et al.  Influence of PTFE coating on gas diffusion backing for unitized regenerative polymer electrolyte fuel cells , 2003 .

[176]  P. Lund,et al.  Titanium sinter as gas diffusion backing in PEMFC , 2003 .

[177]  John Banhart,et al.  Aluminum Foams: On the Road to Real Applications , 2003 .

[178]  E. Ticianelli,et al.  Effects of the carbon powder characteristics in the cathode gas diffusion layer on the performance of polymer electrolyte fuel cells , 2002 .

[179]  Zhigang Qi,et al.  Improvement of water management by a microporous sublayer for PEM fuel cells , 2002 .

[180]  Tae-Hee Lee,et al.  Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells , 2002 .

[181]  M. Nardelli,et al.  Ultimate strength of carbon nanotubes: A theoretical study , 2002 .

[182]  P. McEuen,et al.  Thermal transport measurements of individual multiwalled nanotubes. , 2001, Physical review letters.

[183]  J. Fricke,et al.  Integration of carbon aerogels in PEM fuel cells , 2001 .

[184]  J. Fricke,et al.  Carbon Cloth Reinforced Carbon Aerogel Films Derived from Resorcinol Formaldehyde , 2001 .

[185]  A. Shukla,et al.  Diffusion layer parameters influencing optimal fuel cell performance , 2000 .

[186]  Pengfei Yang,et al.  Enhanced low-humidity performance in a proton exchange membrane fuel cell by developing a novel hydrophilic gas diffusion layer , 2020 .

[187]  Sabu Thomas,et al.  Introduction to nanomaterials: synthesis and applications , 2019, Nanomaterials for Solar Cell Applications.

[188]  P. Bhingole,et al.  Manufacturing, characterization and applications of lightweight metallic foams for structural applications: Review , 2018 .

[189]  S. Fujibayashi,et al.  Titanium foam for bone tissue engineering , 2017 .

[190]  S. Litster,et al.  Micro-Scale Analysis of Liquid Water Breakthrough inside Gas Diffusion Layer for PEMFC Using X-ray Computed Tomography and Lattice Boltzmann Method , 2017 .

[191]  A. Bazylak,et al.  Multiwall Carbon Nanotube-Based Microporous Layers for Polymer Electrolyte Membrane Fuel Cells , 2017 .

[192]  M. Mench,et al.  Laser Modified Fuel Cell Diffusion Media: Engineering Enhanced Performance via Localized Water Redistribution , 2014 .

[193]  R. Mathur,et al.  CNT Membrane as a Free Standing Electrode for PEM Fuel Cell , 2014 .

[194]  A. Kannan,et al.  Effect of diffusion layers fabricated with different fiber diameters on the performance of low temperature proton exchange membrane fuel cells , 2013 .

[195]  M. Mench,et al.  Laser Perforated Fuel Cell Diffusion Media: Engineered Interfaces for Improved Ionic and Oxygen Transport , 2012 .

[196]  T. Tanuma,et al.  Impact of Gas Diffusion Layers (GDLs) on Water Transport in PEFCs , 2011 .

[197]  Xianguo Li,et al.  Measurement of in-plane effective thermal conductivity in PEM fuel cell diffusion media , 2011 .

[198]  S. Kjelstrup,et al.  Through-Plane Thermal Conductivity of PEMFC Porous Transport Layers , 2010 .

[199]  D. Ingham,et al.  Through-Plane Permeability for Untreated and PTFE-Treated Gas Diffusion Layers in Proton Exchange Membrane Fuel Cells , 2009 .