Conservation law-based air mass flow calculation in engine intake systems

In current engine controls, a number of control methods are based on the air charge estimation in engine intake systems. Since the derivative of the air mass flow through the throttle valve goes to infinity when the intake pressure is close to the upper stream pressure, the relatively large numerical error or oscillation occurs near the singularity point when using common algorithms. This paper develops an effective algorithm for calculating the air mass flow in engine intake systems. Utilizing the high-level model description (HLMD), the system is described by mass and energy conservation laws and therefor the singularity issue at the zero pressuredifference point is transformed into a singularity issue at the corresponding energy point. Then, the implicit midpoint rule, a special symplectic discrete method, is selected to integrate the energy and mass conservation system. The simulation results show that the numerical behaviour of the air mass flow is significantly improved at the singularity point by using the proposed algorithm. The experimental results also verify that the qualitative behaviour of the air mass flow calculated by the proposed algorithm is consistent with the actual physical system.创新点本文提出了一种有效的发动机进气系统进气流量计算方法。基于HLM方法, 应用能量和质量守恒定律建立进气系统模型, 从而将零压差点的奇异问题转换成相应能量点的奇异问题。提出了一种隐式的离散求解方法, 消除了数字仿真技术带来的奇异点震荡问题。仿真结果表明, 应用此算法进气流量的数值行为在奇异点得到有效改善, 实验结果也验证了由此算法计算的进气流量的定性行为与实际的物理系统相一致。

[1]  Monique Chyba,et al.  The role of symplectic integrators in optimal control , 2009 .

[2]  Hui Xie,et al.  A hybrid disturbance rejection control solution for variable valve timing system of gasoline engines. , 2014, ISA transactions.

[3]  Lino Guzzella,et al.  Introduction to Modeling and Control of Internal Combustion Engine Systems , 2004 .

[4]  M.J. Jankovic,et al.  Introduction to Modeling and Control of Internal Combustion Engine Systems [Book Review] , 2005, IEEE Control Systems.

[5]  Satish Chand,et al.  Neural networks and fuzzy logic-based spark advance control of SI engines , 2011, Expert Syst. Appl..

[6]  J. Marsden,et al.  Discrete mechanics and variational integrators , 2001, Acta Numerica.

[7]  J. Karl Hedrick,et al.  A High Level approach to mean value modeling of an automotive engine during cold-start , 2014, 2014 American Control Conference.

[8]  Robert Piche,et al.  A Two Regime Orifice Flow Formula for Numerical Simulation , 1999 .

[9]  Jun Yang,et al.  Model-Based Stochastic Optimal Air–Fuel Ratio Control With Residual Gas Fraction of Spark Ignition Engines , 2014, IEEE Transactions on Control Systems Technology.

[10]  Lars Eriksson,et al.  Modeling and Control of Turbocharged SI and DI Engines , 2007 .

[11]  E. Hairer,et al.  Geometric Numerical Integration: Structure Preserving Algorithms for Ordinary Differential Equations , 2004 .

[12]  Junichi Kako,et al.  Development of High Level Modeling method for rapid modeling process , 2014, Proceedings of the 33rd Chinese Control Conference.

[13]  T. Shen,et al.  A stochastic logical system approach to model and optimal control of cyclic variation of residual gas fraction in combustion engines , 2016 .

[14]  Wolfgang Borutzky,et al.  An orifice flow model for laminar and turbulent conditions , 2002, Simul. Model. Pract. Theory.

[15]  P. Krus The simulation of fluid power systems with complex load dynamics , 1986 .

[16]  Akira Ohata Physical Turbocharger Model on High Level Model Description (HLMD) , 2013 .

[17]  Matti Vilenius,et al.  Methods for Simulating Steady-State and Dynamic Behaviour of Two-Way Cartridge Circuits , 1990 .