Non-invasive, plug-and-play pollution detector for vehicle on-board instantaneous CO2 emission monitoring

[1]  Yunshan Ge,et al.  Real driving energy consumption and CO2 & pollutant emission characteristics of a parallel plug-in hybrid electric vehicle under different propulsion modes , 2022, Energy.

[2]  Hubert Kuszewski,et al.  The Development of CO2 Instantaneous Emission Model of Full Hybrid Vehicle with the Use of Machine Learning Techniques , 2021, Energies.

[3]  Shaocai Yu,et al.  Rapid Assessments of Light-Duty Gasoline Vehicle Emissions Using On-Road Remote Sensing and Machine Learning , 2021, The Science of the total environment.

[4]  Boqiang Fan,et al.  Parallel attention-based LSTM for building a prediction model of vehicle emissions using PEMS and OBD , 2021 .

[5]  Mukul Singh,et al.  Deep Learning Model Based CO2 Emissions Prediction Using Vehicle Telematics Sensors Data , 2021, IEEE Transactions on Intelligent Vehicles.

[6]  M. A. Costagliola,et al.  Emissions and energy consumption of a plug-in hybrid passenger car in Real Driving Emission (RDE) test , 2021, Transportation Engineering.

[7]  A. Agarwal,et al.  Real-world automotive emissions: Monitoring methodologies, and control measures , 2021 .

[8]  M. Coelho,et al.  Driving aggressiveness in hybrid electric vehicles: Assessing the impact of driving volatility on emission rates , 2020 .

[9]  Simone Ehrenberger,et al.  Pollutant emissions analysis of three plug-in hybrid electric vehicles using different modes of operation and driving conditions , 2020 .

[10]  Jesus Alvarez-Florez,et al.  Real drive cycles analysis by ordered power methodology applied to fuel consumption, CO2, NOx and PM emissions estimation , 2020, Frontiers of Environmental Science & Engineering.

[11]  G. Martini,et al.  A miniature Portable Emissions Measurement System (PEMS) for real-driving monitoring of motorcycles , 2020, Atmospheric Measurement Techniques.

[12]  K. Lejda,et al.  Creating an emission model based on portable emission measurement system for the purpose of a roundabout , 2019, Environmental Science and Pollution Research.

[13]  Biagio Ciuffo,et al.  The development and validation of a vehicle simulator for the introduction of Worldwide Harmonized test protocol in the European light duty vehicle CO2 certification process , 2018, Applied Energy.

[14]  Biagio Ciuffo,et al.  How much difference in type-approval CO2 emissions from passenger cars in Europe can be expected from changing to the new test procedure (NEDC vs. WLTP)? , 2018 .

[15]  Biagio Ciuffo,et al.  Fuel consumption and CO2 emissions of passenger cars over the New Worldwide Harmonized Test Protocol , 2016 .

[16]  H. Christopher Frey,et al.  Evaluation of numerical models for simulation of real-world hot-stabilized fuel consumption and emissions of gasoline light-duty vehicles , 2006 .

[17]  Biagio Ciuffo,et al.  The difference between reported and real-world CO2 emissions: How much improvement can be expected by WLTP introduction? , 2017 .

[18]  Hesham Rakha,et al.  Development of VT-Micro model for estimating hot stabilized light duty vehicle and truck emissions , 2004 .