Contact damage failure analyses of fretting wear behavior of the metal stem titanium alloy-bone cement interface.

[1]  J. D. del Real,et al.  Evaluation of Elution and Mechanical Properties of High-Dose Antibiotic-Loaded Bone Cement: Comparative "In Vitro" Study of the Influence of Vancomycin and Cefazolin. , 2015, The Journal of arthroplasty.

[2]  D. Paustenbach,et al.  Toxicology of wear particles of cobalt-chromium alloy metal-on-metal hip implants Part I: physicochemical properties in patient and simulator studies. , 2015, Nanomedicine : nanotechnology, biology, and medicine.

[3]  S. Rojviroj,et al.  The effects of different mixing speeds on the elution and strength of high-dose antibiotic-loaded bone cement created with the hand-mixed technique. , 2015, The Journal of arthroplasty.

[4]  K. Kaufman,et al.  Effect of heterotopic ossification on hip range of motion and clinical outcome. , 2015, The Journal of arthroplasty.

[5]  M. Grant,et al.  CoCr wear particles generated from CoCr alloy metal-on-metal hip replacements, and cobalt ions stimulate apoptosis and expression of general toxicology-related genes in monocyte-like U937 cells. , 2014, Toxicology and applied pharmacology.

[6]  J. Geringer,et al.  Friction/fretting-corrosion mechanisms: Current trends and outlooks for implants , 2014 .

[7]  S. Evans,et al.  Ageing and moisture uptake in polymethyl methacrylate (PMMA) bone cements☆ , 2014, Journal of the mechanical behavior of biomedical materials.

[8]  S. Ge,et al.  Bond strength analysis of the bone cement- stem interface of hip arthroplasties. , 2014, Asian Pacific journal of tropical medicine.

[9]  S. Taschieri,et al.  Evaluation of clinical outcomes and bone loss around titanium implants with oxidized surface: six-year follow-up results from a prospective case series study. , 2014, Clinical implant dentistry and related research.

[10]  P. Shrotriya,et al.  Influence of roughness on surface instability of medical grade cobalt-chromium alloy (CoCrMo) during contact corrosion-fatigue , 2013 .

[11]  M. Morlock,et al.  The influence of contact conditions and micromotions on the fretting behavior of modular titanium alloy taper connections. , 2013, Medical engineering & physics.

[12]  A. Neville,et al.  Fretting corrosion of fully cemented polished collarless tapered stems: The influence of PMMA bone cement , 2013 .

[13]  Fan Yang,et al.  The future of biologic coatings for orthopaedic implants. , 2013, Biomaterials.

[14]  H. Zhang,et al.  Biotribological properties at the stem-cement interface lubricated with different media. , 2013, Journal of the mechanical behavior of biomedical materials.

[15]  Liam Blunt,et al.  The influence of bone cement type on production of fretting wear on the femoral stem surface: a preliminary study. , 2012, Clinical biomechanics.

[16]  J. Geringer,et al.  Atomic force microscopy investigations on pits and debris related to fretting-corrosion between 316L SS and PMMA , 2012 .

[17]  B. Espehaug,et al.  Is there still a place for the cemented titanium femoral stem? , 2012, Acta orthopaedica.

[18]  K. Kawanabe,et al.  Clinical outcomes of cemented double-tapered titanium femoral stems: a minimum 5-year follow-up , 2011, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[19]  Hongyu Zhang,et al.  The contribution of the micropores in bone cement surface to generation of femoral stem wear in total hip replacement , 2011 .

[20]  J. Geringer,et al.  Fretting-corrosion between 316L SS and PMMA: Influence of ionic strength, protein and electrochemical conditions on material wear. Application to orthopaedic implants , 2011 .

[21]  P. Boscainos,et al.  Effect of surgical approach for total hip replacement on hip function using Harris Hip scores and Trendelenburg's test. A retrospective analysis. , 2011, The surgeon : journal of the Royal Colleges of Surgeons of Edinburgh and Ireland.

[22]  Lan Zhang,et al.  The Effect of Acrylic Bone Cement Solidification Conditions on the Compressive Property , 2011 .

[23]  L. Blunt,et al.  The Significance of the Micropores at the Stem–Cement Interface in Total Hip Replacement , 2011, Journal of biomaterials science. Polymer edition.

[24]  K. Kawanabe,et al.  Long-term results of cemented total hip arthroplasty in developmental dysplasia with acetabular bulk bone grafts after improving operative techniques. , 2010, The Journal of arthroplasty.

[25]  L. Blunt,et al.  What results in fretting wear on polished femoral stems , 2009 .

[26]  S. Ge,et al.  Fretting wear behavior of nitrogen ion implanted titanium alloys in bovine serum lubrication , 2009 .

[27]  A. Timperley,et al.  Revision of the cemented femoral stem using a cement-in-cement technique: a five- to 15-year review. , 2009, The Journal of bone and joint surgery. British volume.

[28]  Hongyu Zhang,et al.  Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement , 2009 .

[29]  R. Reis,et al.  A review on the polymer properties of Hydrophilic, partially Degradable and Bioactive acrylic Cements (HDBC) , 2008 .

[30]  K. Weise,et al.  Results of a cemented straight titanium alloy femoral stem after mean follow-up of 13 years , 2007, European Journal of Orthopaedic Surgery & Traumatology.

[31]  F. Oktar,et al.  Water resistance of bone-cements reinforced with bioceramics , 2007 .

[32]  R. Trebše,et al.  Long-term survival of a cemented titanium-aluminium-vanadium alloy straight-stem femoral component. , 2006, The Journal of bone and joint surgery. British volume.

[33]  S. Molloy,et al.  Health outcome measures in the evaluation of total hip arthroplasties--a comparison between the Harris hip score and the Oxford hip score. , 2005, The Journal of arthroplasty.

[34]  Jean Geringer,et al.  Fretting-corrosion of materials used as orthopaedic implants , 2005 .

[35]  A. Schweizer,et al.  Five-year results of two cemented hip stem models each made of two different alloys , 2005, Archives of Orthopaedic and Trauma Surgery.

[36]  Leonid A. Sosnovskiy,et al.  TRIBO-FATIGUE: Wear-Fatigue Damage and its Prediction , 2004 .

[37]  P. Griss,et al.  A comparative clinical outcome evaluation of smooth (10–13 year results) versus rough surface finish (5–8 year results) in an otherwise identically designed cemented titanium alloy stem , 2003, Archives of Orthopaedic and Trauma Surgery.

[38]  David Nowell,et al.  Stress gradient effects in fretting fatigue , 2003 .

[39]  A. Robling,et al.  The Effect of Mechanical Loading on the Size and Shape of Bone in Pre‐, Peri‐, and Postpubertal Girls: A Study in Tennis Players , 2002, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.

[40]  P. Herberts,et al.  The Swedish Total Hip Replacement Register , 2002, The Journal of bone and joint surgery. American volume.

[41]  P J Prendergast,et al.  Evaluation of cement stresses in finite element analyses of cemented orthopaedic implants. , 2001, Journal of biomechanical engineering.

[42]  J. Liao,et al.  Influence of micro-motion initiated by relative abrasions between prosthetic metallic component and bone cement: Comparative studies , 2001 .

[43]  R. Villar,et al.  Is titanium so bad? Medium-term outcome of cemented titanium stems. , 2001, The Journal of bone and joint surgery. British volume.

[44]  W. Harris,et al.  In Vivo Skeletal Responses to Porous-Surfaced Implants Subjected to Small Induced Motions* , 1997, The Journal of bone and joint surgery. American volume.

[45]  N Verdonschot,et al.  Subsidence of THA stems due to acrylic cement creep is extremely sensitive to interface friction. , 1996, Journal of biomechanics.

[46]  A Laupacis,et al.  The Nicolas Andry Award: Comparative Results of Cemented and Cementless Total Hip Arthroplasty , 1996, Clinical orthopaedics and related research.

[47]  M. Braden,et al.  Water absorption characteristics of modified hydroxyapatite bone cements. , 1995, Biomaterials.

[48]  W. Harris,et al.  The problem is osteolysis. , 1995, Clinical orthopaedics and related research.

[49]  J. Kärrholm,et al.  Does early micromotion of femoral stem prostheses matter? 4-7-year stereoradiographic follow-up of 84 cemented prostheses. , 1994, The Journal of bone and joint surgery. British volume.

[50]  W H Harris,et al.  Quantification of Implant Micromotion, Strain Shielding, and Bone Resorption With Porous‐Coated Anatomic Medullary Locking Femoral Prostheses , 1992, Clinical orthopaedics and related research.

[51]  L Ryd,et al.  Roentgen stereophotogrammetric analysis of prosthetic fixation in the hip and knee joint. , 1992, Clinical orthopaedics and related research.

[52]  T. Thomas,et al.  Contact of rough surfaces: A review of experimental work , 1980 .

[53]  S. Ge,et al.  Experiment investigation on fretting wear and wear debris performance for the stem-cement interface , 2015 .

[54]  Minhao Zhu,et al.  Dual motion fretting wear behaviors of titanium and its alloy in artificial saliva , 2014 .

[55]  J. D. del Real,et al.  [Influence of the physiological medium on the mechanical properties of bone cement: can current studies be extrapolated?]. , 2014, Revista espanola de cirugia ortopedica y traumatologia.

[56]  H. Akiyama,et al.  In-vitro characteristics of cemented titanium femoral stems with a smooth surface finish , 2013, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[57]  Kyungmok Kim,et al.  Fretting corrosion processes and wear mechanisms in medical implants , 2013 .

[58]  Zhu Min-hao.  Study on torsional fretting corrosion behaviors of Ti6Al4V alloy in the serum solution , 2012 .

[59]  Stefano Mischler,et al.  Tribocorrosion of passive metals and coatings , 2011 .

[60]  B. Bo.  The measurement of hip joints of the people in south of china and clinical significance , 2004 .

[61]  B. Bhushan,et al.  Introduction to Tribology , 2002 .

[62]  Lu Shibi.  Comparative study of PDGF－B and BMP－7 receptors distribution on histiocytes of interface membranes around aseptic loosened prostheses , 2001 .

[63]  Li-xin Xiang,et al.  Physical and mechanical characteristic of bone cement mixed with antibiotics , 2001 .

[64]  S. Santavirta,et al.  Cytokines in aseptic loosening of total hip replacement , 1997 .

[65]  P. Leyvraz,et al.  The morphology of the proximal femur. A three-dimensional radiographic analysis. , 1992, The Journal of bone and joint surgery. British volume.

[66]  H J Mankin,et al.  Epithelioid sarcoma in the upper extremity. , 1992, The Journal of bone and joint surgery. American volume.

[67]  A Sarmiento,et al.  Radiographic analysis of a low-modulus titanium-alloy femoral total hip component. Two to six-year follow-up. , 1985, The Journal of bone and joint surgery. American volume.