A Simple Approach to the ThermoElastoHydroDynamic Behavior of Mechanical Face Seals

This article presents a semi-analytical analysis of non-contacting mechanical face seals. The model takes account of thermal effects and face distortions that generally determine the performance of mechanical seals. It is shown that the seal behavior is a function of just two dimensionless parameters: (a) the sealing number Se, which depends on the operating and design parameters of the seal, and (b) the coning number Co, which is the ratio of elastic and thermal distortions. The theoretical results are compared to measurements obtained on an inner pressurized seal. Good agreement on the temperature of the faces and on dissipated power is obtained for various rotation speeds, validating the assumptions used in developing the model. The analysis of the influence of Se and Co on the behavior of mechanical face seals makes it possible to highlight several operating modes.

[1]  Gordon S. Buck.  Heat Transfer In Mechanical Seals , 1989 .

[2]  Itzhak Green,et al.  Stability threshold and steady-state response of noncontacting coned-face seals© , 1985 .

[3]  Noël Brunetière,et al.  A Simple and Easy-To-Use TEHD Model for Non-Contacting Liquid Face Seals , 2003 .

[4]  Noël Brunetière,et al.  2D numerical modelling of the TEHD transient behaviour of mechanical face seals , 2003 .

[5]  A. O. Lebeck,et al.  Fluid Temperature and Film Coefficient Prediction and Measurement in Mechanical Face Seals—-Numerical Results , 1998 .

[6]  Fujio Tachibana,et al.  Heat Transfer in an Annulus with an Inner Rotating Cylinder , 1959 .

[7]  N. Brunetière,et al.  Heat transfer in a mechanical face seal , 2009 .

[8]  I. Etsion,et al.  A thermohydrodynamic analysis of a misaligned mechanical face seal , 1993 .

[9]  A. Parmar,et al.  An Experimental and Theoretical Study of Pressure and Thermal Distortions in a Mechanical Seal , 1986 .

[10]  Noël Brunetière,et al.  TEHD Lubrication of Mechanical Face Seals in Stable Tracking Mode: Part 1—Numerical Model and Experiments , 2003 .

[11]  Kurt M. Becker,et al.  Measurements of convective heat transfer from a horizontal cylinder rotating in a tank of water , 1963 .

[12]  Amrat Parmar.  THERMAL CYCliNG IN MECHANICAL SEALS - CAUSES, PREDICTION, PREVENTION , 1992 .

[13]  Traian Cicone,et al.  Non-isothermal performance characteristics of fluidfilm mechanical face seals , 2001 .

[14]  I. Etsion,et al.  A Thermo-Hydrodynamic Analysis of a Mechanical Face Seal , 1992 .

[15]  Noël Brunetière,et al.  TEHD lubrication of Mechanical Face Seals in stable tracking mode. Part 2: Parametric study , 2003 .