Chemiluminescence Sensor with Mn(III)-Tetrakis (4-sulfonatophenyl)-porphyrin Immobilized on Dioctadecyldimethylammonium Chloride Bilayer Membranes Incorporated Into PVC Film

Abstract An indicator phase for a flow-through chemiluminescence (CL) sensor composed of ordered surfactant assemblies, a polymer and a catalyst was evaluated by measuring adrenaline. The method is based on use of Mn (III)-porphyrin immobilized on a bilayer membrane contained in a blended film, prepared by incorporating dioctadecyl-dimethylammonium chloride into polyvinyl chloride. The sensor consisted of a Pyrex glass tube (30 mm × 5 mm i.d.) packed with silica glass wool, on which the indicator phase was coated, and a photomultiplier tube. The blend film functioned as a favorable reaction medium for the adrenaline CL, and further enhanced CL was observed with the immobilized catalyst. This indicator phase permitted adrenaline to be detected down to 3 × 10−6 M with a 20 μl injection into a 0.3 M NaOH carrier solution. The relative standard deviation (n = 10) was 1.0% for 5 × 10−5 M adrenaline. For 80 successive injections of 5 × 10−5 M adrenaline, the variation of the CL signal was within the relative st...