论文信息 - ANSYS-Based Dynamic Analysis of High-Speed Motorized Spindle

ANSYS-Based Dynamic Analysis of High-Speed Motorized Spindle

In the paper, the characteristics of mode and harmonic response of the axis of the high-speed motorized spindle are presented with the FEM (Finite Element Method). A dual-dimension model with the FEM is developed and simulated using ANSYS commercial software. The result shows that the rated rotating speed of the high-speed motorized spindle is far smaller than the first-order natural resonance speed, and the dynamic displacement and stiffness do not change significantly compared with the static performance of working of the motorized spindle. The dynamic characteristics of the motorized spindle are accord with the requirements of design.

[1] Jin Kyung Choi,et al. Characteristics of a spindle bearing system with a gear located on the bearing span , 1997 .

[2] Jin Kyung Choi,et al. Thermal characteristics of the spindle bearing system with a gear located on the bearing span , 1998 .

[3] Jay F. Tu,et al. A power flow model for high speed motorized spindles : Heat generation characterization , 2001 .

[4] Hongqi Li,et al. Integrated Dynamic Thermo-Mechanical Modeling of High Speed Spindles, Part 2: Solution Procedure and Validations , 2004 .

[5] Hongqi Li,et al. Analysis of bearing configuration effects on high speed spindles using an integrated dynamic thermo-mechanical spindle model , 2004 .

[6] Yii-Wen Hwang,et al. Centrifugal force induced dynamics of a motorized high-speed spindle , 2006 .

[7] Tianbiao Yu,et al. Dynamic Analysis and Design of the Spindle-Bearing System in Turn-milling Centre , 2007, 2007 IEEE International Conference on Automation and Logistics.

[8] Xu Min,et al. An improved thermal model for machine tool bearings , 2007 .

[9] Chi-Wei Lin,et al. Design Parameter Sensitivity Analysis of High-Speed Motorized Spindle Systems Considering High-Speed Effects , 2007, 2007 International Conference on Mechatronics and Automation.