Thermal-hydraulic study of a wire spacer fuel assembly

Abstract The paper presents refined three-dimensional simulations of the flow and heat transfer in fuel assemblies as found or suggested for liquid metal coolant fast reactors. The wire spacers, helically wound along the pin axis, generate a strong secondary flow pattern in opposition to smooth pins. The eddy viscosity and second moment turbulence models yield to very similar predictions of global friction and heat transfer coefficients and within the range of available experimental correlations. The four configurations simulated range from a small test rig to the full scale reactor bundle (7, 19, 61 and 271 pins) in order to separate (a) global swirl boundary effects, where helical wires leaning against the casing deflect the flow in unison, from (b) homogeneous flow patterns in the core, where wire helices counteract each other. The 61 and 271 pins simulations show a clear decoupling of (a) and (b). The effect of the variation of the helix pass has also been investigated for the 7 pin geometry. Finally, the paper considers the variation of the results as function of the meshing and in particular with the level of detail used for the pin-wire connection.

[1]  Wasim RAZA,et al.  Comparative Analysis of Flow and Convective Heat Transfer between 7-Pin and 19-Pin Wire-Wrapped Fuel Assemblies , 2008 .

[2]  E. H. Novendstern.  Turbulent flow pressure drop model for fuel rod assemblies utilizing a helical wire-wrap spacer system , 1972 .

[3]  V Vonka.  Measurement of secondary flow vortices in a rod bundle , 1988 .

[4]  N. Todreas,et al.  Hydrodynamic models and correlations for bare and wire-wrapped hexagonal rod bundles — Bundle friction factors, subchannel friction factors and mixing parameters , 1986 .

[5]  M. Schikorr,et al.  Review and proposal for best fit of wire-wrapped fuel bundle friction factor and pressure drop predictions using various existing correlations , 2008 .

[6]  C. Moulinec,et al.  Optimizing Code_Saturne computations on Petascale systems , 2011 .

[7]  C. Rhie,et al.  Numerical Study of the Turbulent Flow Past an Airfoil with Trailing Edge Separation , 1983 .

[8]  F. Archambeau,et al.  Code Saturne: A Finite Volume Code for the computation of turbulent incompressible flows - Industrial Applications , 2004 .

[9]  T. Kármán,et al.  Mechanische Ahnlichkeit und Turbulenz , 1930 .

[10]  Andrew Siegel,et al.  Large eddy simulation of wire-wrapped fuel pins I: Hydrodynamics in a periodic array. , 2007 .

[11]  D. Chang,et al.  Numerical simulation of turbulent flow in a 37-rod bundle , 2007 .

[12]  Dominique Laurence,et al.  LES of heated fuel bundle arranged into triangular array , 2011 .

[13]  Dominique Laurence,et al.  LES and Hybrid RANS/LES of Turbulent Flow in Fuel Rod Bundle Arranged with a Triangular Array , 2010 .

[14]  P. L. Kirillov,et al.  Generalization of experimental data on heat transfer in molten metals , 1963 .

[15]  P. Chellapandi,et al.  CFD investigation of helical wire-wrapped 7-pin fuel bundle and the challenges in modeling full scale 217 pin bundle , 2007 .

[16]  Nam-il Tak,et al.  Investigation on turbulent heat transfer to lead–bismuth eutectic flows in circular tubes for nuclear applications , 2006 .

[17]  W. Pfrang,et al.  Assessment of correlations for heat transfer to the cooland for heavy liquid metal cooled core designs , 2007 .

[18]  K. Rehme.  Pressure Drop Correlations for Fuel Element Spacers , 1973 .

[19]  W. Jones,et al.  The prediction of laminarization with a two-equation model of turbulence , 1972 .

[20]  A. Bejan.  Convection Heat Transfer , 1984 .

[21]  Jochen Fröhlich,et al.  Direct and Large-Eddy Simulation VIII , 2011 .

[22]  Konstantin Mikityuk,et al.  Heat transfer to liquid metal: Review of data and correlations for tube bundles , 2009 .

[23]  T. Sundararajan,et al.  Turbulent flow simulation in a wire-wrap rod bundle of an LMFBR , 2010 .

[24]  R. A. Markley,et al.  Laminar, Transition, and Turbulent Parallel Flow Pressure Drop Across Wire-Wrap-Spaced Rod Bundles , 1980 .

[25]  L. Meyer,et al.  Experimental investigation of turbulent transport of momentum and energy in a heated rod bundle , 1998 .

[26]  T. Gatski,et al.  Modelling the pressure–strain correlation of turbulence: an invariant dynamical systems approach , 1991, Journal of Fluid Mechanics.

[27]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .