论文信息 - Design of the optimum duty cycle for a fuzzy controlled active filter

Design of the optimum duty cycle for a fuzzy controlled active filter

The paper presents a CC-PWM shunt active filter. A fuzzy control acts on the inverter devices duty cycles ensuring an optimum current tracking. A new controller design procedure has been adopted: with a mathematical analysis a rough outline of the fuzzy rules has been possible, then they have been modified during the simulation campaign to compensate the neglected phenomena. Moreover a compensating factor has been introduced to include the mains voltage effect on the current control. In short the analysis developed and the consequent control includes all the phenomena using no knowledge of load, coupling filter or grid parameters thanks to fuzzy logic computing. The results show a very high reduction of the line current harmonic distortion with medium switching frequency.

M. Liserre | P. Zanchetta | A. Lecci | A. Dell'Aquila

[1] Marco Liserre,et al. A new fuzzy logic strategy for active power filter , 2000 .

[2] G. Joos,et al. Design and performance of active power filters , 1998 .

[3] Paolo Mattavelli,et al. Comparison of current control techniques for active filter applications , 1998, IEEE Trans. Ind. Electron..

[4] Hirofumi Akagi,et al. New trends in active filters for power conditioning , 1996 .

[5] P. Mattavelli,et al. Energy-based compensation strategy for active filters , 1999, Proceedings of the 38th IEEE Conference on Decision and Control (Cat. No.99CH36304).

[6] Hirofumi Akagi,et al. Control Strategy and Site Selection of a Shunt Active Filter for installation on a Power Distribution System , 1996 .

[7] Fang Zheng Peng,et al. Application issues of active power filters , 1998 .

[8] Hirofumi Akagi. Control Strategy and Site Selection of a Shunt Active Filter for Damping of Harmonic Propagation in Power Distribution Systems , 1997 .