Accurate measurements of laser-induced bulk damage density

The laser damage community has long been searching for the reproducibility of damage measurements in the nanosecond (ns) regime. Here we show that laser-induced bulk damage density of frequency conversion crystals can be measured with high accuracy and repeatability in the range from 2 to 20 ns. The rasterscan test procedure (Lamaignere et al 2007 Rev. Sci. Instrum. 78 103105), previously developed in order to determine laser damage density of large aperture UV fused silica optics, has been adapted to bulk damage measurement. The large volume scanned during tests permits us to measure very low damage densities. For smaller optical components, small volumes are tested using the normalized 1/1 test procedure. Whatever test procedures, accuracy and repeatability are obtained by means of a suitable data reduction. For comparison between different procedures, the classical damage probability plot has to be converted in terms of damage density. The consideration of error bars on damage site distributions is compulsory to compare experimental data. A special emphasis is put on damage detection tools. When tests are carried out on diverse facilities, pulse duration, spatial distribution and beam overlap are the key parameters which are to be taken into account to compare experimental data. We describe the equipment, test procedures and data analysis to perform these damage tests with small beams (Gaussian beams, about 1 mm @1/e, and top-hat beams). Other tests are realized with larger beams (cm sized) which are compared with small beam results. The consistency of all the results gives confidence in the measurements. Reproducibility of measures is discussed in connection with current theoretical understanding of laser damage.

[1]  Gerard Raze,et al.  The impact of laser damage on the lifetime of optical components in fusion lasers , 2004, SPIE Laser Damage.

[2]  M. Feit,et al.  Laser-induced damage in deuterated potassium dihydrogen phosphate. , 2003, Applied optics.

[3]  Laurent Lamaignère,et al.  Effect of thermal annealing on laser damage resistance of KDP at 3ω , 2008, Laser Damage.

[4]  Stavros G. Demos,et al.  System for evaluation of laser-induced damage performance of optical materials for large aperture lasers , 2004 .

[5]  Michael D. Feit,et al.  Techniques for qualitative and quantitative measurement of aspects of laser-induced damage important for laser beam propagation , 2005 .

[6]  Manyalibo J. Matthews,et al.  The effect of laser pulse duration on laser-induced damage in KDP and SiO2 , 2006, SPIE Laser Damage.

[7]  Michael D. Feit,et al.  Pulse length dependence of laser conditioning and bulk damage in KD2PO4 , 2005, SPIE Laser Damage.

[8]  Pierre Garrec,et al.  R-on-1 automatic mapping: a new tool for laser damage testing , 1996, Laser Damage.

[9]  Michael D. Feit,et al.  Complex morphology of laser-induced bulk damage in K2H(2−x)DxPO4 crystals , 2006 .

[10]  Christopher W. Carr,et al.  Effect of temporal pulse shape on optical damage , 2006 .

[11]  Michael D. Feit,et al.  Analysis of bulk DKDP damage distribution, obscuration, and pulse-length dependence , 2001, SPIE Laser Damage.

[12]  Harry B. Radousky,et al.  A new damage testing system for detailed evaluation of damage behavior of bulk KDP and DKDP , 2005, SPIE Laser Damage.

[13]  N. Bloembergen,et al.  Laser-induced electric breakdown in solids , 1974 .

[14]  Michael D. Feit,et al.  Implications of nanoabsorber initiators for damage probability curves, pulselength scaling, and laser conditioning , 2003, SPIE Laser Damage.

[15]  L. Lamaignère,et al.  An accurate, repeatable, and well characterized measurement of laser damage density of optical materials. , 2007, The Review of scientific instruments.

[16]  Bertrand Bertussi,et al.  Impurities detection by optical techniques in KH2PO4 crystals , 2007 .

[17]  M Commandré,et al.  Effect of multiple laser irradiations on silica at 1064 and 355 nm. , 2005, Optics letters.

[18]  S G Demos,et al.  Wavelength dependence of laser-induced damage: determining the damage initiation mechanisms. , 2003, Physical review letters.

[19]  Bertrand Bertussi,et al.  SOCRATE: an optical bench dedicated to the understanding and improvement of a laser conditioning process. , 2006, Applied optics.

[20]  Guillaume Duchateau,et al.  Coupling statistics and heat transfer to study laser-induced crystal damage by nanosecond pulses. , 2007, Optics express.

[21]  Guillaume Duchateau,et al.  Scaling laws in laser-induced potassium dihydrogen phosphate crystal damage by nanosecond pulses at 3ω , 2008 .

[22]  Michael D. Feit,et al.  Extrapolation of damage test data to predict performance of large-area NIF optics at 355 nm , 1999, Laser Damage.

[23]  Stavros G. Demos,et al.  Electronic structure calculations of an oxygen vacancy in KH2PO4 , 2005 .

[24]  G. Duchateau,et al.  Comparison of ns and sub-ns laser conditioning of KDP and DKDP crystals for high power lasers , 2007, SPIE Laser Damage.

[25]  Bertrand Bertussi,et al.  Preliminary results on mitigation of KDP surface damage using the ball dimpling method , 2007, SPIE Laser Damage.

[26]  Laurent Gallais,et al.  Investigation of nanodefect properties in optical coatings by coupling measured and simulated laser damage statistics , 2008 .

[27]  S. Palmier,et al.  Effect of the temporal pulse duration on the initiation of damage sites on fused silica surfaces , 2008, Laser Damage.

[28]  S. Demos,et al.  Nanosecond time-resolved multiprobe imaging of laser damage in transparent solids , 2002 .

[29]  Claude Amra,et al.  Laser-induced damage of materials in bulk, thin-film, and liquid forms. , 2002, Applied optics.

[30]  S. C. Jones,et al.  Recent Progress On Laser-Induced Modifications And Intrinsic Bulk Damage Of Wide-Gap Optical Materials , 1989 .

[31]  S G Demos,et al.  Localized dynamics during laser-induced damage in optical materials. , 2004, Physical review letters.