Inhibition of interfacial embrittlement at SnBi/Cu single crystal by electrodeposited Ag film

Electrodeposited Ag film was explored as a potential interfacial barrier to Bi segregation for suppressing the interfacial embrittlement of Cu/SnBi interconnects. The presence of Ag film introduced Ag3Sn intermetallic layer at the interface, which effectively prevented Bi from reaching the Cu/intermetallic interface. When the persistent slip bands (PSBs) in the Cu single crystal were driven to impinge the Cu/Cu3Sn interface, interfacial cracking was averted and instead superceded by cracking of intermetallic compounds (IMCs) at the interface.

[1]  W. J. Plumbridge,et al.  Solders in electronics , 1996, Journal of Materials Science.

[2]  Gautam Ghosh,et al.  Dissolution and interfacial reactions of thin-film Ti/Ni/Ag metallizations in solder joints , 2001 .

[3]  M. Abtew,et al.  Lead-free Solders in Microelectronics , 2000 .

[4]  G. Palasantzas,et al.  Effects of precipitates in Cu upon impact fracture: an ultra-high-vacuum study with local probe Scanning Auger/Electron Microscopy , 2000 .

[5]  J. Shang,et al.  Effect of aging on fatigue crack growth at sn-pb/cu interfaces , 1995 .

[6]  Xingjun Liu,et al.  Interfacial Reaction and Morphology Between Molten Sn Base Solders and Cu Substrate , 2004 .

[7]  J. Glazer Metallurgy of low temperature Pb-free solders for electronic assembly , 1995 .

[8]  H. Müllejans,et al.  Bismuth segregation at copper grain boundaries , 1999 .

[9]  Jian Ku Shang,et al.  Fatigue damage mechanisms of copper single crystal/Sn–Ag–Cu interfaces , 2006 .

[10]  R. P. Grant,et al.  Intermetallic compound layer growth by solid state reactions between 58Bi-42Sn solder and copper , 1995 .

[11]  G. Duscher,et al.  Bismuth-induced embrittlement of copper grain boundaries , 2004, Nature materials.

[12]  J. Shang,et al.  Interfacial embrittlement by bismuth segregation in copper/tin–bismuth Pb-free solder interconnect , 2001 .

[13]  K. Tu,et al.  Six cases of reliability study of Pb-free solder joints in electronic packaging technology , 2002 .

[14]  J. W. Morris,et al.  Characterization of eutectic Sn-Bi solder joints , 1992 .

[15]  Vítek,et al.  Atomic structure of a grain boundary in a metallic alloy: Combined electron microscope and theoretical study. , 1991, Physical review letters.

[16]  J. Shang,et al.  Interfacial segregation of bismuth in copper/tin-bismuth solder interconnect , 2001 .