Study on Assembly and Tensile Performance of Circumferential Anchor Joint for Shield Tunnel Considering Roughness and Size of Structure

[1]  Chi Zhang,et al.  Full-scale experimental study on failure characteristics of the key segment in shield tunnel with super-large cross-section , 2022, Tunnelling and Underground Space Technology.

[2]  Hehua Zhu,et al.  Full-scale experimental investigation on progressive failure characteristics of shield segmental lining connected through segmental joints containing ductile-iron joint panels , 2022, Archives of Civil and Mechanical Engineering.

[3]  L. Tao,et al.  A study on bearing characteristic and failure mechanism of thin-walled structure of a prefabricated subway station , 2022, Frontiers of Structural and Civil Engineering.

[4]  K. Yuen,et al.  Developing a prediction model for segment joint opening in an underwater shield tunnel , 2022, Marine Georesources & Geotechnology.

[5]  Dong-ming Zhang,et al.  Full-scale testing and numerical modelling of segmental-joint performance with corroded bolt , 2022, Tunnelling and Underground Space Technology.

[6]  Yang Qi,et al.  Full-scale test on seismic performance of circumferential joint of shield-driven tunnel , 2021 .

[7]  Yong Lu,et al.  Semi-analytical thermo-mechanical model for the shield tunnel segmental joint subjected to elevated temperatures , 2021, Tunnelling and Underground Space Technology.

[8]  L. Tao,et al.  Three-dimensional seismic performance analysis of large and complex underground pipe trench structure , 2021 .

[9]  Wenjun Zhang,et al.  A novel test setup for determining waterproof performance of rubber gaskets used in tunnel segmental joints: Development and application , 2021 .

[10]  Peng-fei Li,et al.  Experiments on the seismic performance of Y-shape joints of subway stations built by enlarging two parallel shield tunnels , 2021 .

[11]  Chuan He,et al.  Experimental study on the tensile performance of circumferential joint in shield tunnel , 2021 .

[12]  Y. Qiao,et al.  Flexural behavior of segmental joint containing double rows of bolts: Experiment and simulation , 2021 .

[13]  Wenzheng Cao,et al.  Study on Stress and Deformation of Bolt Joints of Shield Tunnel under Static and Seismic Action , 2021, KSCE Journal of Civil Engineering.

[14]  H. Lai,et al.  Theoretical Method of Chamber Pressure for EPB Shield Tunneling Under-Crossing Existing Metro Tunnels , 2021, KSCE Journal of Civil Engineering.

[15]  Wenjun Zhang,et al.  Waterproofing behavior of sealing gaskets for circumferential joints in shield tunnels: A full-scale experimental investigation , 2020 .

[16]  P. Lin,et al.  Comparative study of the seismic performance of prefabricated and cast-in-place subway station structures by shaking table test , 2020 .

[17]  N. Li,et al.  Effect of Subway Excavation with Different Support Pressures on Existing Utility Tunnel in Xi’an Loess , 2020 .

[18]  H. Rehman,et al.  Estimation Method for TBM Cutterhead Drive Design Based on Full-Scale Tunneling Tests for Application in Utility Tunnels , 2020, Applied Sciences.

[19]  Luyu Wang,et al.  A structural health monitoring system for data analysis of segment joint opening in an underwater shield tunnel , 2020, Structural Health Monitoring.

[20]  S. Shen,et al.  Three-dimensional numerical modelling on localised leakage in segmental lining of shield tunnels , 2020, Computers and Geotechnics.

[21]  Cheng Shi,et al.  Shaking table test on seismic response characteristics of prefabricated subway station structure , 2019, Tunnelling and Underground Space Technology.

[22]  Xi Jiang,et al.  The influence of hand hole on the ultimate strength and crack pattern of shield tunnel segment joints by scaled model test , 2019, Frontiers of Structural and Civil Engineering.

[23]  Hehua Zhu,et al.  Experimental testing on ductile-iron joint panels for high-stiffness segmental joints of deep-buried drainage shield tunnels , 2019, Tunnelling and Underground Space Technology.

[24]  Ji Zhao,et al.  Three-dimensional dynamic response analysis of a single-ring structure in a prefabricated subway station , 2019, Sustainable Cities and Society.

[25]  Shunhua Zhou,et al.  Research on Mechanics of Longitudinal Joint in Shield Tunnel by the Nonlinear Spring Equivalent Method , 2019, KSCE Journal of Civil Engineering.

[26]  Huabei Liu,et al.  Measuring joint opening displacement between model shield-tunnel segments for reduced-scale model tests , 2018, Structures.

[27]  Li Zhang,et al.  Experimental analysis of mechanical behavior of segmental joint for gas pipeline shield tunnel under unfavorable compression-bending loads , 2018, Tunnelling and Underground Space Technology.

[28]  Tao Wang,et al.  Monitoring the behavior of segment joints in a shield tunnel using distributed fiber optic sensors , 2018 .

[29]  Kenichi Soga,et al.  Experimental investigation of the nonlinear behavior of segmental joints in a water-conveyance tunnel , 2017 .

[30]  Behzad Fatahi,et al.  Influence of Size and Load-Bearing Mechanism of Piles on Seismic Performance of Buildings Considering Soil–Pile–Structure Interaction , 2017 .

[31]  Xian Liu,et al.  Ultimate load‐carrying capacity of the longitudinal joints in segmental tunnel linings , 2017 .

[32]  Kenichi Soga,et al.  Behaviour of cast-iron bolted tunnels and their modelling , 2015 .

[33]  Saba Gharehdash,et al.  Numerical modeling of the dynamic behaviour of tunnel lining in shield tunneling , 2015 .

[34]  Hehua Zhu,et al.  Experimental and analytical study on longitudinal joint opening of concrete segmental lining , 2015 .

[35]  Adam Bezuijen,et al.  Calculation of longitudinal bending moment and shear force for Shanghai Yangtze River Tunnel: Application of lessons from Dutch research , 2013 .

[36]  Hehua Zhu,et al.  Full-scale testing and modeling of the mechanical behavior of shield TBM tunnel joints , 2013 .

[37]  Wenjun Zhang,et al.  Behavior of composite segment for shield tunnel , 2010 .

[38]  Supot Teachavorasinskun,et al.  Influence of segmental joints on tunnel lining , 2010 .

[39]  Hany El Naggar,et al.  An analytical solution for jointed tunnel linings in elastic soil or rock , 2008 .

[40]  K. Lee,et al.  The equivalence of a jointed shield-driven tunnel lining to a continuous ring structure , 2001 .

[41]  Seizo Nakajima,et al.  Development of the Axial-Slide Ductile Segment , 1998 .

[42]  A. M. Muir Wood,et al.  The circular tunnel in elastic ground , 1975 .

[43]  Jun Sheng Chen,et al.  Numerical study on crack problems in segments of shield tunnel using finite element method , 2009 .

[44]  Hiroshi Hara,et al.  Development of new composite segment and application to the tunneling project. , 2003 .