Effect of Surface Roughness on the Surface Texturing of 316 l Stainless Steel by Nanosecond Pulsed Laser

[1]  S. Sinha.  Laser based surface treatment of bioactive glass: Dependence on pulsed laser ablation , 2022, Applied Surface Science Advances.

[2]  Yinghuai Dong,et al.  Morphology modelling and validation in nanosecond pulsed laser ablation of metallic materials , 2022, Precision Engineering.

[3]  Q. Ma,et al.  Design Methodology and Application of Surface Texture: A Review , 2022, Coatings.

[4]  X. Cao,et al.  Ablation threshold modelling and validation of metal Nanosecond laser processing , 2022, Optics Communications.

[5]  T. Graf,et al.  Analytical Model for the Depth Progress during Laser Micromachining of V-Shaped Grooves , 2022, Micromachines.

[6]  G. Römer,et al.  Wavelength dependence of picosecond-pulsed laser ablation of hot-dip galvanized steel , 2022, Applied Physics A.

[7]  M. François,et al.  Laser textured titanium surface characterization , 2022, Applied Surface Science.

[8]  Chunming Wang,et al.  Numerical and experimental analysis for morphology evolution of 6061 aluminum alloy during nanosecond pulsed laser cleaning , 2022, Surface and Coatings Technology.

[9]  D. Qi,et al.  Temperature field simulation of chalcogenide glass ablation by nanosecond pulsed laser-based on pump–probe technology , 2021, Optics & Laser Technology.

[10]  C. L. Li,et al.  Evolution of nanosecond laser-induced phase explosion based on a high-speed continuous imaging system , 2021, Results in Physics.

[11]  F. Lusquiños,et al.  Nanosecond, picosecond and femtosecond laser surface treatment of magnesium alloy: Role of pulse length , 2021, Surface and Coatings Technology.

[12]  R. Bathe,et al.  Impact of laser surface texturing (LST) on the tribological characteristics of piston rings and cylinder liners – a review. Part 1: development of LST technology , 2021 .

[13]  Jian-Xi Yang,et al.  Theoretical and experimental study of surface texturing with laser machining , 2021, Advances in Manufacturing.

[14]  G. Pardal,et al.  Selection of parameters in nanosecond pulsed wave laser micro-welding , 2021, The International Journal of Advanced Manufacturing Technology.

[15]  M. Subramanian,et al.  Nanosecond laser surface texturing of type 316L stainless steel for contact guidance of bone cells and superior corrosion resistance , 2021 .

[16]  Daniel J. Förster,et al.  Analytical model for the depth progress of percussion drilling with ultrashort laser pulses , 2021, Applied Physics A.

[17]  S. Castagne,et al.  Laser surface texturing of zirconia-based ceramics for dental applications: A review. , 2021, Materials science & engineering. C, Materials for biological applications.

[18]  Yang Wang,et al.  Simulation of nanosecond laser cleaning the paint based on the thermal stress , 2021 .

[19]  B. B. Pradhan,et al.  Laser Surface Texturing for Biomedical Applications: A Review , 2021 .

[20]  Ganesh G. Dongre,et al.  Laser micro & nano surface texturing for enhancing osseointegration and antimicrobial effect of biomaterials: A review , 2021 .

[21]  M. Adamiak,et al.  Structuring of the Ti6Al4V alloy surface by pulsed laser remelting , 2021 .

[22]  M. Salvo,et al.  Laser surface texturing of ceramics and ceramic composite materials – A review , 2020, Ceramics International.

[23]  Anmin Yin,et al.  Nanosecond Laser Ablation of Ti–6Al–4V under Different Temperature , 2020, Applied Sciences.

[24]  S. Amoruso,et al.  Laser ablation and structuring of CdZnTe with femtosecond laser pulses , 2020 .

[25]  Honggeng Li,et al.  Effect of single pulsed picosecond and 100 nanosecond laser cleaning on surface morphology and welding quality of aluminium alloy , 2020 .

[26]  B. Mao,et al.  Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review , 2020 .

[27]  S. Edwardson,et al.  Femtosecond laser micro-structuring of amorphous polyether(ether)ketone at 775 nm and 387 nm , 2020, Journal of Physics D: Applied Physics.

[28]  Piotr Barosz,et al.  Efficiency Analysis of Manufacturing Line with Industrial Robots and Human Operators , 2020 .

[29]  Matthias Domke,et al.  Surface ablation efficiency and quality of fs lasers in single-pulse mode, fs lasers in burst mode, and ns lasers , 2020 .

[30]  Bernardus Engelina Römer Gerardus Richardus,et al.  Effect of surface roughness on the ultrashort pulsed laser ablation fluence threshold of zinc and steel , 2019, Applied Surface Science.

[31]  Ali Sulaiman Alsagri,et al.  Numerical and experimental studies on the effect of varied beam diameter, average power and pulse energy in Nd: YAG laser welding of Ti6Al4V , 2019, Infrared Physics & Technology.

[32]  J. Billingham,et al.  Geometrical modelling of pulsed laser ablation of high performance metallic alloys , 2019, International Journal of Machine Tools and Manufacture.

[33]  Yinghao Zhou,et al.  A Comprehensive Study of Steel Powders (316L, H13, P20 and 18Ni300) for Their Selective Laser Melting Additive Manufacturing , 2019, Metals.

[34]  Peng Yi,et al.  Study on the influence of scanning strategy on the morphology of laser micro-dimple texturing , 2018, Other Conferences.

[35]  Xiaoyan Zeng,et al.  Effect of laser absorption on picosecond laser ablation of Cr12MoV mold steel, 9Cr18 stainless steel and H13A cemented carbide , 2018 .

[36]  M. Arenas,et al.  Influence of laser parameters in surface texturing of Ti6Al4V and AA2024-T3 alloys , 2018 .

[37]  A. Riveiro,et al.  Laser Surface Texturing of Polymers for Biomedical Applications , 2018, Front. Phys..

[38]  X. Hua,et al.  Manufacturing of micro-textures on metals by nanosecond laser micromachining , 2018 .

[39]  Shuwen Wang,et al.  Tribological effects of laser surface texturing and residual stress , 2017 .

[40]  Daniel Braun,et al.  Laser Textured Surfaces for Mixed Lubrication: Influence of Aspect Ratio, Textured Area and Dimple Arrangement , 2017 .

[41]  Zhihua Wang,et al.  Surface Texturing-Plasma Nitriding Duplex Treatment for Improving Tribological Performance of AISI 316 Stainless Steel , 2016, Materials.

[42]  Jie Fu,et al.  Effect of nanosecond pulse laser ablation on the surface morphology of Zr-based metallic glass , 2016 .

[43]  M. Ghazali,et al.  Enhancing material performance through laser surface texturing: a review , 2016 .

[44]  E. Brousseau,et al.  Nanosecond laser processing of Zr41.2Ti13.8Cu12.5Ni10Be22.5 with single pulses , 2016 .

[45]  Xiaohong Ding,et al.  Experimental study on laser microstructures using long pulse , 2016 .

[46]  M. Ghazali,et al.  Laser surface texturing and its contribution to friction and wear reduction: a brief review , 2016 .

[47]  D. Gropper,et al.  Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings , 2016 .

[48]  Jiangxu Li,et al.  Influence of surface roughness on laser-induced damage of Nd:YAG transparent ceramics , 2015 .

[49]  Andrew J. Waddie,et al.  Laser microsculpting for the generation of robust diffractive security markings on the surface of metals , 2015 .

[50]  S. Joshi,et al.  A model of laser ablation with temperature-dependent material properties, vaporization, phase explosion and plasma shielding , 2014 .

[51]  Rainer Kling,et al.  Surface blackening by laser texturing with high repetition rate femtosecond laser up to 1MHz , 2014, Photonics West - Lasers and Applications in Science and Engineering.

[52]  Michael Auinger,et al.  Effect of surface roughness on optical heating of metals , 2014 .

[53]  Michael Schmidt,et al.  Understanding thin film laser ablation: The role of the effective penetration depth and the film thickness , 2014 .

[54]  Antti Salminen,et al.  Characterization of Process Efficiency Improvement in Laser Additive Manufacturing , 2014 .

[55]  A. Conde,et al.  Microstructural and Wear Behavior Characterization of Porous Layers Produced by Pulsed Laser Irradiation in Glass-Ceramics Substrates , 2013, Materials.

[56]  B. Jaeggi,et al.  Factors controlling the incubation in the application of ps laser pulses on copper and iron surfaces , 2013, Photonics West - Lasers and Applications in Science and Engineering.

[57]  Fysikopoulos Apostolos,et al.  Energy Efficiency of Manufacturing Processes: A Critical Review☆ , 2013 .

[58]  V. Gerbreders,et al.  Electron beam induced surface modification of amorphous Sb2Se3 thin film , 2012 .

[59]  Litian Hu,et al.  Tribological investigation of MoS2 coatings deposited on the laser textured surface , 2012 .

[60]  A. Ostendorf,et al.  Selective Ablation of Thin Films by Ultrashort Laser Pulses , 2012 .

[61]  T. Özel,et al.  Micro-Laser Processing , 2011 .

[62]  Tuğrul Özel,et al.  Micro-Manufacturing: Design and Manufacturing of Micro-Products , 2011 .

[63]  Suhas S. Joshi,et al.  A finite element model to predict the ablation depth in pulsed laser ablation , 2010 .

[64]  Craig B. Arnold,et al.  Fundamentals of Laser-Material Interaction and Application to Multiscale Surface Modification , 2010 .

[65]  N. G. Semaltianos,et al.  Single-pulse drilling study on Au, Al and Ti alloy by using a picosecond laser , 2009 .

[66]  Zbigniew Pakiela,et al.  Measurement of mechanical properties in a 316L stainless steel welded joint , 2009 .

[67]  Izhak Etsion,et al.  Friction and wear of MoS2 films on laser textured steel surfaces , 2008 .

[68]  Ning Ren,et al.  Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion , 2008 .

[69]  Graham Rutterford,et al.  Micro-machining of metals, ceramics and polymers using nanosecond lasers , 2007 .

[70]  T. Glynn,et al.  The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in air , 2004 .

[71]  I. Etsion.  State of the art in Laser Surface Texturing , 2004 .

[72]  Friedrich Dausinger,et al.  Femtosecond technology for precision manufacturing: fundamental and technical aspects , 2003 .

[73]  J. J. Laserna,et al.  Effect of plasma shielding on laser ablation rate of pure metals at reduced pressure , 1999 .

[74]  Xianfan Xu,et al.  Explosive phase transformation in excimer laser ablation , 1998 .

[75]  Wolfgang Eichhammer,et al.  Industrial energy efficiency: Indicators for a European cross-country comparison of energy efficiency in the manufacturing industry , 1997 .

[76]  Lay Kee Ang,et al.  Analysis of laser absorption on a rough metal surface , 1997 .

[77]  Peter Michael Baumgart,et al.  A new laser texturing technique for high performance magnetic disk drives , 1995 .

[78]  Arthur H. Guenther,et al.  Surface roughness and laser damage threshold , 1977 .

[79]  C. S. Kim,et al.  Thermophysical properties of stainless steels , 1975 .