Carbon nanotube synthesis, characteristics, and microbattery applications

Abstract The stabilities and efficiencies of cathodes of microbatteries are important for their superior performance. The performance of cathode of microbattery systems can be improved by applying new materials or combining components with unique properties into cathode materials. Individual carbon nanotubes exhibit extraordinary mechanical, thermal and electrical properties. Composite materials, using carbon nanotubes as fillers are, expected to show similar superior properties. This study reports synthesis of carbon nanotubes by microwave chemical vapor deposition (MACVD) and applying them in the cathode of microbatteries to improve battery performance. Carbon nanotubes were grown on Ni deposited porous alumina substrates in a flowing gas mixture of methane and hydrogen. Characterization of the carbon nanotubes was carried out using scanning electronic microscopy, transmission electron microscopy, and Raman spectroscopy. It was found that the carbon nanotubes were randomly oriented, spaghetti-like, and with a high aspect ratio. The diameters of CNTs, as determined by transmission electron microscopy (TEM) were between 10 and 100 nm. TEM also showed that the nanotubes had a central hollow with amorphous carbons covering outside wall. The CNTs were nanocoated with a V 2 O 5 sol–gel, which upon curing formed a xeorgel about the carbon nanotubes. This formed a molecular composite cathode. Microbatteries/microcapacitors were made and subjected to charge/discharge cycles with a consistent maximum charge of 4.60 V.

[1]  P. Eklund,et al.  Vibrational modes of carbon nanotubes; Spectroscopy and theory , 1995 .

[2]  Kyoo-Seung Han,et al.  Fabrication temperature and applied current density effects on the direct fabrication of lithium nickel oxide thin-film electrodes in LiOH solution by the electrochemical-hydrothermal method , 1999 .

[3]  Rodney Andrews,et al.  Carbon Nanotube Sol−Gel Composite Materials , 2001 .

[4]  N. Dudney,et al.  Solid state thin-film lithium battery systems , 1999 .

[5]  M. Siegal,et al.  Synthesis of large arrays of well-aligned carbon nanotubes on glass , 1998, Science.

[6]  R. J. Waite,et al.  Formation of filamentous carbon from iron, cobalt and chromium catalyzed decomposition of acetylene , 1973 .

[7]  J. B. Bates,et al.  RECHARGEABLE THIN-FILM LITHIUM MICROBATTERIES , 1993 .

[8]  E. Campbell,et al.  Raman spectroscopy and field-emission properties of CVD-grown carbon-nanotube films , 2001 .

[9]  G. Chen,et al.  Electrochemical capacitance of nanocomposite films formed by coating aligned arrays of carbon nanotubes with polypyrrole , 2002 .

[10]  Vladimir I. Merkulov,et al.  Patterned growth of individual and multiple vertically aligned carbon nanofibers , 2000 .

[11]  J. Harb,et al.  Microscopic Nickel-Zinc Batteries for Use in Autonomous Microsystems , 2001 .

[12]  Paul H. Humble,et al.  Optimization of Nickel-Zinc Microbatteries for Hybrid Powered Microsensor Systems , 2003 .

[13]  Xiangyun Song,et al.  Development of a carbon-based lithium microbattery , 1999 .

[14]  G. Jellison,et al.  A Stable Thin‐Film Lithium Electrolyte: Lithium Phosphorus Oxynitride , 1997 .

[15]  D. Teeters,et al.  Resistance measurements at the nanoscale: scanning probe ac impedance spectroscopy , 2003 .

[16]  Y. Park,et al.  Electrochemical properties of LiMn2O4 thin films: suggestion of factors for excellent rechargeability , 2000 .

[17]  Dale Teeters,et al.  Vanadia xerogel nanocathodes used in lithium microbatteries , 2003 .

[18]  M. Meyyappan,et al.  Growth of carbon nanotubes by thermal and plasma chemical vapour deposition processes and applications in microscopy , 2002 .

[19]  D. Gonbeau,et al.  X-ray photoelectron spectroscopy: A powerful tool for a better characterization of thin film materials , 1999 .

[20]  N. Dudney.  Addition of a thin-film inorganic solid electrolyte (Lipon) as a protective film in lithium batteries with a liquid electrolyte , 2000 .

[21]  M. Dresselhaus,et al.  Phonons in carbon nanotubes , 2000 .

[22]  K. Park,et al.  Characterization of tin oxide/LiMn2O4 thin-film cell , 2000 .

[23]  Jihan Kim,et al.  Fabrication of LiMn2O4 thin films by sol–gel method for cathode materials of microbattery , 1998 .

[24]  W. D. de Heer,et al.  Carbon Nanotubes--the Route Toward Applications , 2002, Science.

[25]  Dale Teeters,et al.  Study of the ion conduction of polymer electrolytes confined in micro and nanopores , 2003 .

[26]  N. Dudney,et al.  “Lithium‐Free” Thin‐Film Battery with In Situ Plated Li Anode , 2000 .

[27]  Dale Teeters,et al.  Characterization of PVdF-HFP polymer membranes prepared by phase inversion techniques I. Morphology and charge–discharge studies , 2003 .