Electrochemical properties of electrospun PAN/MWCNT carbon nanofibers electrodes coated with polypyrrole

Abstract The multi-walled carbon nanotube (CNT)-embedded activated carbon nanofibers (ACNF/CNT) and activated carbon nanofibers (ACNF) were prepared by stabilizing and activating the non-woven web of polyacrilonitrile (PAN) or PAN/CNT prepared by electrospinning. Both ACNF and ACNF/CNT were partially aligned along the winding direction of the drum winder. The average diameter of ACNF was 330 nm, while that of ACNF/CNT was lowered to 230 nm with rough surface. This was attributed to the CNT-added polymer solution in the electrospinning process providing finer fibers by increasing the electrical conductivity compared with the CNT-free one. The specific surface area and electrical conductivity of ACNF were 984 m 2 /g and 0.42 S/cm, respectively, while those of ACNF/CNT were 1170 m 2 /g and 0.98 S/cm, respectively. PPy was coated on the electrospun ACNF/CNT (PPy/ACNF/CNT) by in situ chemical polymerization in order to improve the electrochemical performance. The capacitances of the ACNF and PPy/ACNF electrodes were 141 and 261 F/g at 1 mA/cm 2 , respectively, whereas that of PPy/ACNF/CNT was 333 F/g. This improvement in capacitance was attributed to the following: (i) the preparation of aligned nano-sized ACNF/CNT by electrospinning and the addition of CNT and (ii) the formation of a good charge-transfer complex by the PPy coating on the surface of the aligned nano-sized ACNF/CNT. The former leads to a good morphology and superior properties, such as a higher surface area, the formation of mesopores and an increase in electrical conductivity. The latter offers a refined three-dimensional network due to the highly porous structure between ACNF/CNT and PPy.

[1]  Dong‐Won Kim,et al.  Synthesis and pseudo-capacitance of chemically-prepared polypyrrole powder , 2003 .

[2]  M. Alagar,et al.  Pt and Pt–Ru nanoparticles decorated polypyrrole/multiwalled carbon nanotubes and their catalytic activity towards methanol oxidation , 2007 .

[3]  O. Park,et al.  Capacitance properties of graphite/polypyrrole composite electrode prepared by chemical polymerization of pyrrole on graphite fiber , 2002 .

[4]  F. Béguin,et al.  Supercapacitors based on conducting polymers/nanotubes composites , 2006 .

[5]  Hang Shi,et al.  Studies of activated carbons used in double-layer capacitors , 1998 .

[6]  Dong‐Won Kim,et al.  Highly conductive polymer electrolytes supported by microporous membrane , 2001 .

[7]  Maria Forsyth,et al.  Electrochemical performance of polyaniline nanofibres and polyaniline/multi-walled carbon nanotube composite as an electrode material for aqueous redox supercapacitors , 2007 .

[8]  Jim P. Zheng,et al.  Hydrous Ruthenium Oxide as an Electrode Material for Electrochemical Capacitors , 1995 .

[9]  Bin Dong,et al.  Preparation and electrochemical characterization of polyaniline/ multi-walled carbon nanotubes composites for supercapacitor , 2007 .

[10]  F. Béguin,et al.  Carbon materials for the electrochemical storage of energy in capacitors , 2001 .

[11]  Sang Hee Park,et al.  Characteristics of supercapaitor electrodes of PBI-based carbon nanofiber web prepared by electrospinning , 2004 .

[12]  F. Béguin,et al.  Supercapacitors from nanotubes/polypyrrole composites , 2001 .

[13]  S. Sushanth Kumar,et al.  Polyacrylonitrile Single‐Walled Carbon Nanotube Composite Fibers , 2004 .

[14]  A. Ōya,et al.  Preparation and pore control of highly mesoporous carbon from defluorinated PTFE , 2003 .

[15]  Hsisheng Teng,et al.  Influence of oxygen treatment on electric double-layer capacitance of activated carbon fabrics , 2002 .

[16]  A. Burke.  Ultracapacitors: why, how, and where is the technology , 2000 .

[17]  R. Kötz,et al.  Principles and applications of electrochemical capacitors , 2000 .

[18]  Joselito M. Razal,et al.  Super-tough carbon-nanotube fibres , 2003, Nature.

[19]  Wan-Jin Lee,et al.  Supercapacitor performances of activated carbon fiber webs prepared by electrospinning of PMDA-ODA poly(amic acid) solutions , 2004 .

[20]  B. Wei,et al.  Electric double-layer capacitors using carbon nanotube electrodes and organic electrolyte , 2001 .

[21]  D. Lozano‐Castelló,et al.  Influence of pore structure and surface chemistry on electric double layer capacitance in non-aqueous electrolyte , 2003 .

[22]  Kun-Hong Lee,et al.  Electrical properties of electrical double layer capacitors with integrated carbon nanotube electrodes , 2004 .

[23]  C. Kim,et al.  Electrochemical properties of carbon nanofiber web as an electrode for supercapacitor prepared by electrospinning , 2003 .

[24]  Chensha Li,et al.  A study of activated carbon nanotubes as double-layer capacitors electrode materials , 2004 .

[25]  Yongyao Xia,et al.  Interfacial synthesis of porous MnO2 and its application in electrochemical capacitor , 2007 .

[26]  Keiichi Okajima,et al.  Capacitance behavior of activated carbon fibers with oxygen-plasma treatment , 2005 .

[27]  J. Madden,et al.  Towards high power polypyrrole/carbon capacitors , 2005 .

[28]  Youlong Xu,et al.  Capacitance properties of single wall carbon nanotube/polypyrrole composite films , 2007 .

[29]  S. Pitchumani,et al.  Electrochemical deposition of polypyrrole for symmetric supercapacitors , 2006 .

[30]  Wan-Jin Lee,et al.  Preparation and properties of conducting polypyrrole-sulfonated polycarbonate composites , 2001 .

[31]  François Béguin,et al.  Determination of the specific capacitance of conducting polymer/nanotubes composite electrodes using different cell configurations , 2005 .

[32]  Jae-Hyun Park,et al.  Electrochemical properties of polypyrrole/sulfonted SEBS composite nanofibers prepared by electrospinning , 2007 .

[33]  Jong-Huy Kim,et al.  Polypyrrole/carbon composite electrode for high-power electrochemical capacitors , 2006 .

[34]  G. Chen,et al.  Controlling the nanostructure of electrochemically grown nanoporous composites of carbon nanotubes and conducting polymers , 2004 .

[35]  Kwang-Heon Kim,et al.  Fabrication and electrochemical properties of carbon nanotube/polypyrrole composite film electrodes with controlled pore size , 2008 .