Interlaminar shear behavior of continuous and short carbon fiber reinforced polymer composites fabricated by additive manufacturing
暂无分享,去创建一个
[1] L. Ye,et al. 3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance , 2020 .
[2] A. Seyam,et al. A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties , 2020 .
[3] K. Hart,et al. Extended finite element method (XFEM) modeling of fracture in additively manufactured polymers , 2020, Additive Manufacturing.
[4] Dazhong Wu,et al. Tensile and flexural behaviors of additively manufactured continuous carbon fiber-reinforced polymer composites , 2019, Composite Structures.
[5] J. M. Chacón,et al. Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties , 2019, Composites Science and Technology.
[6] J. M. Chacón,et al. Additive Manufacturing of PLA-Based Composites Using Fused Filament Fabrication: Effect of Graphene Nanoplatelet Reinforcement on Mechanical Properties, Dimensional Accuracy and Texture , 2019, Polymers.
[7] A. Le Duigou,et al. Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications , 2019, Additive Manufacturing.
[8] J. Hurley,et al. Design considerations and modeling of fiber reinforced 3D printed parts , 2019, Composites Part B: Engineering.
[9] A. Bastawros,et al. Mode-I fracture toughness and surface morphology evolution for contaminated adhesively bonded composite structures , 2018, Composite Structures.
[10] M. Longana,et al. An investigation into 3D printing of fibre reinforced thermoplastic composites , 2018, Additive Manufacturing.
[11] J. M. Chacón,et al. Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling , 2018, Polymer Testing.
[12] H. A. Abadi,et al. Elastic properties of 3D printed fibre-reinforced structures , 2018, Composite Structures.
[13] A. Kashani,et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.
[14] F. París,et al. Characterization of 3D printed long fibre reinforced composites , 2018 .
[15] Wai Yee Yeong,et al. Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics , 2018 .
[16] Bruce L. Tai,et al. Bending behaviors of 3D-printed Bi-material structure: Experimental study and finite element analysis , 2017 .
[17] Hui Wang,et al. Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties , 2017 .
[18] Libin Zhao,et al. XFEM-based model for simulating zigzag delamination growth in laminated composites under mode I loading , 2017 .
[19] J. Botsis,et al. Delamination in cross-ply laminates: Identification of traction–separation relations and cohesive zone modeling , 2015 .
[20] W. Cong,et al. Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .
[21] Guillaume Houzeaux,et al. An XFEM/CZM implementation for massively parallel simulations of composites fracture , 2015 .
[22] Justin A. Blaber,et al. Ncorr: Open-Source 2D Digital Image Correlation Matlab Software , 2015, Experimental Mechanics.
[23] L. Love,et al. Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .
[24] Salim Belouettar,et al. Modelling of failure in long fibres reinforced composites by X-FEM and cohesive zone model , 2013 .
[25] Ayse Aytac,et al. Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites , 2013 .
[26] Gary J. Cheng,et al. An eXtended Finite Element Method (XFEM) study on the effect of reinforcing particles on the crack propagation behavior in a metal–matrix composite , 2012 .
[27] Pedro P. Camanho,et al. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models , 2007 .
[28] M. D. Thouless,et al. Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite , 2005 .
[29] M. D. Thouless,et al. Use of mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite , 2005 .
[30] W. Zhong,et al. Short fiber reinforced composites for fused deposition modeling , 2001 .
[31] Ted Belytschko,et al. Elastic crack growth in finite elements with minimal remeshing , 1999 .
[32] P. Geubelle,et al. Impact-induced delamination of composites: A 2D simulation , 1998 .
[33] Herzl Chai,et al. Observation of deformation and damage at the tip of cracks in adhesive bonds loaded in shear and assessment of a criterion for fracture , 1993, International Journal of Fracture.
[34] S. Shaw,et al. The Fracture Resistance of a Toughened Epoxy Adhesive , 1981 .
[35] A. Hillerborg,et al. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .
[36] S. Ahzi,et al. Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication , 2019, Composite Structures.
[37] Tuan Ngo,et al. Bimaterial 3D printing and numerical analysis of bio-inspired composite structures under in-plane and transverse loadings , 2017 .
[38] A. Yee,et al. Mode II fracture of composites interlayered with nylon particles , 1996 .