High-Speed PM Machines: Applications, Trends and Limits

High-speed permanent magnet machines are the focus of this thesis; this chapter offers an overview of their current and prospective applications and a theoretical study of their limits.

[1]  T. Higuchi,et al.  The Development of Small Size Ultra-High Speed Drive System , 2007, 2007 Power Conversion Conference - Nagoya.

[2]  Isao Takahashi,et al.  Discussion of "A super high speed PM motor drive system by a quasi-current source inverter" [and reply] , 1995 .

[3]  A. Andersson,et al.  Thermal analysis of a high-speed generator , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[4]  Glynn Atkinson,et al.  High power fault tolerant motors for aerospace applications , 2007 .

[5]  Johann W. Kolar,et al.  Design considerations and experimental results of a 100 W, 500 000 rpm electrical generator , 2006 .

[6]  Johann W. Kolar,et al.  An Ultrahigh-Speed, Low Power Electrical Drive System , 2008, IEEE Transactions on Industrial Electronics.

[7]  Mats Johansson,et al.  Design and evaluation of high-speed induction machine , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[8]  Weiguang Li,et al.  Rare earth magnets resisting eddy currents , 1999 .

[9]  Ralph Jansen,et al.  Experimental Performance Evaluation of a High Speed Permanent Magnet Synchronous Motor and Drive for a Flywheel Application at Different Frequencies , 2007 .

[10]  Nicola Bianchi,et al.  High speed drive using a slotless PM motor , 2004, IEEE Transactions on Power Electronics.

[11]  R.H. Lasseter,et al.  Microgrid: a conceptual solution , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[12]  A. Binder,et al.  Fixation of buried and surface-mounted magnets in high-speed permanent-magnet synchronous machines , 2005, IEEE Transactions on Industry Applications.

[13]  Mark Harris,et al.  Miniature Turbojet Development at Hamilton Sundstrand: The TJ-50, TJ-120 and TJ-30 Turbojets , 2003 .

[14]  A. Argento,et al.  Forced vibration and dynamic stability of a rotating tapered composite timoshenko shaft: Bending motions in end-milling operations , 2001 .

[15]  Jacek F. Gieras.  High speed machines , 2008 .

[16]  Masayoshi Esashi,et al.  Development of Micro-Turbo Charger and Micro-Combustor as Feasibility Studies of Three-Dimensional Gas Turbine at Micro-Scale , 2003 .

[17]  Giancarlo Genta,et al.  Dynamics of Rotating Systems , 2005 .

[18]  T. Shimoda.  A Prospective Observation of Bonded Rare-Earth Magnets , 1993, IEEE Translation Journal on Magnetics in Japan.

[19]  René Larsonneur,et al.  Design and control of active magnetic bearing systems for high speed rotation , 1990 .

[20]  M.A. Rahman,et al.  Super high speed electrical machines - summary , 2004, IEEE Power Engineering Society General Meeting, 2004..

[21]  Paul Beer,et al.  High Speed Motor Design For Gas Compressor Applications. , 2006 .

[22]  M. Samotyj,et al.  Application of high speed, high horsepower, ASD controlled induction motors to gas pipelines , 2002 .

[23]  J. Herbst,et al.  Advanced Induction Motor Endring Design Features for High Speed Applications , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[24]  Seok-Myeong Jang,et al.  Comparison of three types of PM brushless machines for an electro-mechanical battery , 2000 .

[25]  P. A. Pilavachi.  Mini- and micro-gas turbines for combined heat and power , 2002 .

[26]  Dominiek Reynaerts,et al.  Development of an axial microturbine for a portable gas turbine generator , 2003 .

[27]  J.W. Kolar,et al.  Megaspeed Drive Systems: Pushing Beyond 1 Million r/min , 2009, IEEE/ASME Transactions on Mechatronics.

[28]  Gordon R. Slemon.  On the design of high-performance surface-mounted PM motors , 1994 .

[29]  Z. Q. Zhu,et al.  Design and analysis of high-speed brushless permanent magnet motors , 1997 .

[30]  B. Dehez,et al.  Dynamical Electromechanical Model for Magnetic Bearings , 2007, IEEE Transactions on Magnetics.

[31]  J. Zu,et al.  Free Vibration and Stability Analysis of Internally Damped Rotating Shafts With General Boundary Conditions , 1998 .

[32]  A. Grauers,et al.  Force density limits in low-speed PM machines due to temperature and reactance , 2004, IEEE Transactions on Energy Conversion.

[33]  J. R. Bumby,et al.  Electrical machines for use in electrically assisted turbochargers , 2004 .

[34]  A. Binder,et al.  Additional losses in high-speed induction machine - removed rotor test , 2005, 2005 European Conference on Power Electronics and Applications.

[35]  I. Takahashi,et al.  A super high speed PM motor drive system by a quasi-current source inverter , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[36]  S. Jang,et al.  A Design Approach to Reduce Rotor Losses in High-Speed Permanent Magnet Machine for Turbo-Compressor , 2006, IEEE Transactions on Magnetics.

[37]  U-Xuan Tan,et al.  Feedforward Controller of Ill-Conditioned Hysteresis Using Singularity-Free Prandtl–Ishlinskii Model , 2009, IEEE/ASME Transactions on Mechatronics.

[38]  Nicola Bianchi,et al.  Potentials and limits of high speed PM motors , 2003 .

[39]  R.H. Jansen,et al.  Design aspects of a high speed permanent magnet synchronous motor / generator for flywheel applications , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[40]  J. Saari.  Thermal analysis of high-speed induction machines , 1998 .

[41]  J.W. Kolar,et al.  An Ultra-High-Speed, 500000 rpm, 1 kW Electrical Drive System , 2007, 2007 Power Conversion Conference - Nagoya.

[42]  E. Spooner,et al.  TORUS' : a slotless, toroidal-stator, permanent-magnet generator , 1992 .

[43]  Tianyu Wang,et al.  Optimization design of rotor structure for high speed permanent magnet machines , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[44]  S. R. Trout,et al.  RARE EARTH MAGNET INDUSTRY IN THE USA: CURRENT STATUS AND FUTURE TRENDS , 2002 .

[45]  A. Binder,et al.  High-speed inverter-fed AC drives , 2007, 2007 International Aegean Conference on Electrical Machines and Power Electronics.

[46]  Seung-Ki Sul,et al.  Implementation of sensorless vector control for super-high speed PMSM of turbo-compressor , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[47]  Jan Abraham Ferreira,et al.  Improved analytical modeling of conductive losses in magnetic components , 1994 .

[48]  Jan Abraham Ferreira,et al.  On the Speed Limits of Permanent-Magnet Machines , 2010, IEEE Transactions on Industrial Electronics.

[49]  K. J. Binns,et al.  Relationship between rated torque and size of permanent magnet machines , 1996 .

[50]  U. Bikle,et al.  Electrical design of high-speed induction motors of up to 15 MW and 20000 RPM , 2002 .

[51]  T. Iwatsubo.  Stability problems of rotor systems , 1980 .