Assessment of read disturb immunity in conducting bridge memory devices - A thermodynamic perspective

Conducting bridge random access memory (CBRAM) devices operate on the basis of repeated nucleation and rupture of the metallic filament during the SET and RESET transitions. One of the critical reliability metrics for any non-volatile memory (NVM) technology is read disturb immunity, which refers to the ability of the device to keep the filament stable and unperturbed during the reading phase. While read disturb has been analyzed in detail for OxRAM which works based on the principle of oxygen vacancy generation and oxygen ion drift/diffusion, the susceptibility of CBRAM to read disturb events has not been analyzed in-depth. We make use of electrical test data, first order thermal model and fundamental thermodynamics to assess the stability of the CBRAM filament in both the high resistance state (HRS) as well as low resistance state (LRS). Our analysis reveals that the HRS retention is very good, while LRS retention can be quite poor for the Nickel-based CBRAM stack.

[1]  D. Kwong,et al.  Oxide-based RRAM: Physical based retention projection , 2010, 2010 Proceedings of the European Solid State Device Research Conference.

[2]  Qi Liu,et al.  Highly Stable Radiation-Hardened Resistive-Switching Memory , 2010, IEEE Electron Device Letters.

[3]  Cher Ming Tan,et al.  Electromigration in ULSI Interconnections , 2010, International Series on Advances in Solid State Electronics and Technology.

[4]  K. Terabe,et al.  Forming and switching mechanisms of a cation-migration-based oxide resistive memory , 2010, Nanotechnology.

[5]  E. Cartier,et al.  Reliability Challenges for CMOS Technology Qualifications With Hafnium Oxide/Titanium Nitride Gate Stacks , 2009, IEEE Transactions on Device and Materials Reliability.

[6]  Kuang-Yeu Hsieh,et al.  A model for the RESET operation of electrochemical conducting bridge resistive memory (CB-ReRAM) , 2010, 2010 International Electron Devices Meeting.

[7]  Xing Wu,et al.  Intrinsic nanofilamentation in resistive switching , 2013 .

[8]  Nagarajan Raghavan,et al.  Uncorrelated multiple conductive filament nucleation and rupture in ultra-thin high-κ dielectric based resistive random access memory , 2011 .

[9]  L. Goux,et al.  90nm W\Al2O3\TiW\Cu 1T1R CBRAM cell showing low-power, fast and disturb-free operation , 2013, 2013 5th IEEE International Memory Workshop.

[10]  L. Goux,et al.  Understanding of the endurance failure in scaled HfO2-based 1T1R RRAM through vacancy mobility degradation , 2012, 2012 International Electron Devices Meeting.

[11]  L. Larcher,et al.  Metal oxide RRAM switching mechanism based on conductive filament microscopic properties , 2010, 2010 International Electron Devices Meeting.

[12]  L. Goux,et al.  Dynamic ‘hour glass’ model for SET and RESET in HfO2 RRAM , 2012, 2012 Symposium on VLSI Technology (VLSIT).

[13]  Zi-zhong Zhu,et al.  Size effects on the melting of nickel nanowires: a molecular dynamics study , 2004 .

[14]  Nagarajan Raghavan,et al.  Resistive switching in NiSi gate metal-oxide-semiconductor transistors , 2010 .