Real-time processing of multi-frequency eddy currents testing signals

In this paper, a real-time Digital Signal Processing (DSP) architecture is proposed to generate and process multi-frequency signals for eddy currents testing. This architecture was implemented on a dedicated instrument whose processing core is a Field-Programmable Gate Array (FPGA) for DSP purposes. Stimulus generation is achieved using Direct Digital Synthesis (DDS) with some improvements to remove spurious frequency components. An In-phase and Quadrature (IQ) demodulation scheme is implemented to estimate the real and imaginary part of the probes output signals. A Cascaded Integrator Comb (CIC) decimator is used to lower the sampling frequency allowing narrowband IIR filtering using low resources. The proposed architecture is able to generate and process the stimulus and input data at 125 MSamples/s and to estimate the input data components at 1.25 MSamples/s rate for frequencies between 50 kHz and 10 MHz.

[1]  Feilu Luo,et al.  Pulsed eddy current imaging and frequency spectrum analysis for hidden defect nondestructive testing and evaluation , 2011 .

[2]  Luis S. Rosado,et al.  Advanced technique for non-destructive testing of friction stir welding of metals , 2010 .

[3]  Yunze He,et al.  Pulsed eddy current technique for defect detection in aircraft riveted structures , 2010 .

[4]  Dongfeng He,et al.  Saw-wave excitation eddy-current NDE based on HTS RF SQUID , 2003 .

[5]  B van den Bos,et al.  Automatic scanning with multi-frequency eddy current on multilayered structures , 2003 .

[6]  T. Chady.  Multi-frequency Exciting and Spectrogram-besed ECT Method , 2000 .

[7]  B. E. Priyanto,et al.  Design & implementation of all digital I-Q modulator and demodulator for high speed WLAN in FPGA , 2003, 2003 IEEE Pacific Rim Conference on Communications Computers and Signal Processing (PACRIM 2003) (Cat. No.03CH37490).

[8]  Li Shu,et al.  Study of pulse eddy current probes detecting cracks extending in all directions , 2008 .

[9]  Huang Songling,et al.  Development of differential probes in pulsed eddy current testing for noise suppression , 2007 .

[10]  E. Hogenauer,et al.  An economical class of digital filters for decimation and interpolation , 1981 .

[11]  Pedro M Ramos,et al.  A reconfigurable digital signal processing system for eddy currents non-destructive testing , 2010, 2010 IEEE Instrumentation & Measurement Technology Conference Proceedings.

[12]  Javier García-Martín,et al.  Non-Destructive Techniques Based on Eddy Current Testing , 2011, Sensors.

[13]  Gui Yun Tian,et al.  Pulsed eddy current testing with variable duty cycle on rivet joints , 2009 .