Machining fixtures are used to locate and constrain a workpiece during a machining operation. To ensure that the workpiece is manufactured according to specified dimensions and tolerances, it must be appropriately located and clamped. Minimising workpiece and fixture tooling deflections due to clamping and cutting forces in machining is critical to machining accuracy. An ideal fixture design maximises locating accuracy and workpiece stability, while minimising displacements.The purpose of this research is to develop a method for modelling workpiece boundary conditions and applied loads during a machining process, analyse modular fixture tool contact area deformation and optimise support locations, using finite element analysis (FEA). The workpiece boundary conditions are defined by locators and clamps. The locators are placed in a 3-2-1 fixture configuration, constraining all degrees of freedom of the workpiece and are modelled using linear spring-gap elements. The clamps are modelled as point loads. The workpiece is loaded to model cutting forces during drilling and milling machining operations. Fixture design integrity is verified. ANSYS parametric design language code is used to develop an algorithm to automatically optimise fixture support and clamp locations, and clamping forces, to minimise workpiece deformation, subsequently increasing machining accuracy. By implementing FEA in a computer-aided-fixture-design environment, unnecessary and uneconomical “trial and error” experimentation on the shop floor is eliminated.
[1]
W. R. DeVries,et al.
Finite element analysis and optimization in fixture design
,
1999
.
[2]
Warren R. DeVries,et al.
Optimization Methods Applied to Selecting Support Positions in Fixture Design
,
1991
.
[3]
Jiang-Liang Hou,et al.
Computer-aided fixture analysis using finite element analysis and mathematical optimization modeling
,
1995
.
[4]
Joseph J. Rencis,et al.
Development of a Finite Element Analysis Tool for Fixture Design Integrity Verification and Optimization
,
2002
.
[5]
Jingxia Yuan,et al.
Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulations
,
1996
.
[6]
Jonathan W. Lee,et al.
Finite-Element Analysis of Flexible Fixturing System
,
1987
.