Hydrogen production from methanol steam reforming using porous copper fiber sintered felt with gradient porosity

A novel porous copper fiber sintered felt (PCFSF) with gradient porosity is fabricated with the multi-step mold pressing and solid-phase sintering method using the cutting copper fibers. Using the impregnation method, the PCFSF as catalyst support is loaded with Cu/Zn/Al/Zr catalyst, and then is embedded into the laminated-sheet methanol steam reforming microreactor for hydrogen production. Based on the SEM results, the microstructures and surface morphology of PCFSF are analyzed. The reaction characteristics of PCFSF with gradient porosity loaded with Cu/Zn/Al/Zr catalyst for methanol steam reforming are experimental investigated under different gas hourly space velocities (GHSVs) and reaction temperatures. Our results indicate that the gradient porosity in the PCFSF has a significant influence on the reaction performance. The PCFSF with three-grade porosity (70%–80%–90%) exhibits better methanol conversion and H2 flow rate when the reactant is fed from 90% to 70% porosity portion.

[1]  Young-Soon Kwon,et al.  Fabrication of a porous material with a porosity gradient by a pulsed electric current sintering process , 2003 .

[2]  Hyun-Do Jung,et al.  Fabrication of titanium scaffolds with porosity and pore size gradients by sequential freeze casting , 2009 .

[3]  Abhaya K. Datye,et al.  Microwave heating of endothermic catalytic reactions: Reforming of methanol , 2002 .

[4]  A. Datye,et al.  Comparison of wall-coated and packed-bed reactors for steam reforming of methanol , 2005 .

[5]  Miao Qian,et al.  A micro-reactor with micro-pin-fin arrays for hydrogen production via methanol steam reforming , 2012 .

[6]  Pil Kim,et al.  Hydrogen production by auto-thermal reforming of ethanol over Ni-Ti-Zr metal oxide catalysts , 2009 .

[7]  Miao Qian,et al.  Effects of structural parameters on the performance of a micro-reactor with micro-pin-fin arrays (MPFAR) for hydrogen production , 2012 .

[8]  Juan A. Baeza,et al.  Methanol opportunities for electricity and hydrogen production in bioelectrochemical systems , 2014 .

[9]  Wei Zhou,et al.  An Innovative Fabrication Process of Porous Metal Fiber Sintered Felts with Three-Dimensional Reticulated Structure , 2010 .

[10]  Hao Yu,et al.  Effect of the metal foam materials on the performance of methanol steam micro-reformer for fuel cells , 2007 .

[11]  Minqiang Pan,et al.  Oriented linear cutting fiber sintered felt as an innovative catalyst support for methanol steam reforming , 2011 .

[12]  Jiujun Zhang,et al.  A review of polymer electrolyte membranes for direct methanol fuel cells , 2007 .

[13]  Yongchen Song,et al.  Hydrogen production from catalytic steam reforming of biodiesel byproduct glycerol: Issues and challenges , 2014 .

[14]  Jun Ni,et al.  Investigation of sintered stainless steel fiber felt as gas diffusion layer in proton exchange membrane fuel cells , 2012 .

[15]  S. Rowshanzamir,et al.  Review of the proton exchange membranes for fuel cell applications , 2010 .

[16]  C. Hebling,et al.  Portable proton exchange membrane fuel-cell systems for outdoor applications , 2006 .

[17]  Min-Hsing Chang,et al.  Two-phase transport in the cathode gas diffusion layer of PEM fuel cell with a gradient in porosity , 2008 .

[18]  Yong Tang,et al.  Optimization of Catalyst Loading for Porous Copper Fiber Sintered Felts Used in Methanol Steam Reforming Microreactors , 2013 .

[19]  Yong Tang,et al.  Porous copper fiber sintered felts: An innovative catalyst support of methanol steam reformer for hydrogen production , 2008 .

[20]  Amornchai Arpornwichanop,et al.  Comparison of high-temperature and low-temperature polymer electrolyte membrane fuel cell systems with glycerol reforming process for stationary applications , 2013 .

[21]  A. Gómez-Cortés,et al.  Hydrogen production by steam reforming of ethanol over nickel supported on La-modified alumina catalysts prepared by sol–gel , 2013 .

[22]  Yong Tang,et al.  Experimental investigation on uniaxial tensile properties of high-porosity metal fiber sintered sheet , 2009 .

[23]  Dao-xi Li,et al.  Gradient porosity and large pore size NiTi shape memory alloys , 2007 .

[24]  Hongguang Jin,et al.  Experimental investigation of hydrogen production integrated methanol steam reforming with middle-temperature solar thermal energy , 2009 .

[25]  Feng Wang,et al.  Experiment of catalyst activity distribution effect on methanol steam reforming performance in the packed bed plate-type reactor , 2013 .

[26]  Chin‐Hsiang Cheng,et al.  Fractal channel design in a micro methanol steam reformer , 2014 .

[27]  Yong Tang,et al.  A performance study of methanol steam reforming microreactor with porous copper fiber sintered felt as catalyst support for fuel cells , 2009 .

[28]  Yun Wang,et al.  A review of polymer electrolyte membrane fuel cells: Technology, applications,and needs on fundamental research , 2011 .

[29]  Ik-Hyun Oh,et al.  Microstructures and mechanical properties of porosity-graded pure titanium compacts , 2003 .

[30]  Albert Renken,et al.  Microstructured reactors for catalytic reactions , 2005 .

[31]  Kuen-Song Lin,et al.  Hydrogen Generation Using a CuO/ZnO-ZrO2 Nanocatalyst for Autothermal Reforming of Methanol in a Microchannel Reactor , 2011, Molecules.

[32]  Q. F. Li,et al.  Ceramic composite components with gradient porosity by powder injection moulding , 2010 .

[33]  Benjamin A. Wilhite,et al.  Autothermal hydrogen generation from methanol in a ceramic microchannel network , 2010 .

[34]  Beatriz Fidalgo,et al.  Microwave-assisted dry reforming of methane , 2008 .

[35]  A. S. Patil,et al.  Portable fuel cell systems for America’s army: technology transition to the field , 2004 .

[36]  Gunther Kolb,et al.  Review: Microstructured reactors for distributed and renewable production of fuels and electrical energy , 2013 .

[37]  Longjian Li,et al.  Experimental investigation of axially non-uniform catalysis for methanol steam reforming , 2014 .

[38]  Chin-Hsiang Cheng,et al.  Effects of porosity gradient in gas diffusion layers on performance of proton exchange membrane fuel cells , 2010 .

[39]  Yong Lu,et al.  Novel microfibrous‐structured silver catalyst for high efficiency gas‐phase oxidation of alcohols , 2010 .

[40]  Yusheng Shi,et al.  316L Stainless Steel with Gradient Porosity Fabricated by Selective Laser Melting , 2010 .

[41]  M. Washio,et al.  Fabrication of function-graded proton exchange membranes by electron beam irradiation for polymer electrolyte fuel cells under nonhumidified condition , 2013 .

[42]  Gunther Kolb,et al.  Microchannel Fuel Processors as a Hydrogen Source for Fuel Cells in Distributed Energy Supply Systems , 2013 .

[43]  Jianli Hu,et al.  An overview of hydrogen production technologies , 2009 .

[44]  Zhijian Tian,et al.  Production of hydrogen by aqueous-phase reforming of glycerol , 2008 .