Graphical singularity analysis of planar parallel manipulators

This paper introduces a new approach to identify singularities of planar parallel manipulators (PPMs). This method is based on Maxwell's reciprocal figure theory which establishes a duality between self stressed frameworks and reciprocal figures, which are abstract dual representations of frameworks. We use line geometry tools to introduce a new graphical construction called the mechanism's line of action graph (MLG). The MLG is introduced in order to implement Maxwell's reciprocal figure theory to mechanisms. We show that the configurations where the MLG has a connected reciprocal figure imply a singularity in the mechanism. This singularity analysis tool is also used to trace the singularity loci of the PPM. Finally, we provide detailed examples of the singularity analysis of two common PPMs; one consists of three limbs with a passive revolute joint, actuated prismatic joint and another passive revolute joint (3-RPR), the other consists of three limbs with three revolute joints, where only the first is actuated (3-RRR)

[1]  J. D. Everett.  A Treatise on the Theory of Screws , 1901, Nature.

[2]  Alain Dandurand.  The Rigidity of Compound Spatial Grids , 1984 .

[3]  Walter Whiteley,et al.  Plane Self Stresses and projected Polyhedra I: The Basic Pattem , 1993 .

[4]  T. M. Charlton.  A history of the theory of structures in the nineteenth century , 1982 .

[5]  J. Maxwell,et al.  I.—On Reciprocal Figures, Frames, and Diagrams of Forces , 1870, Transactions of the Royal Society of Edinburgh.

[6]  Ilian A. Bonev.  Singularity loci of planar parallel manipulators with revolute joints , 2001 .

[7]  K. H. Hunt,et al.  Structural Kinematics of In-Parallel-Actuated Robot-Arms , 1983 .

[8]  Edward J. Haug,et al.  Numerical Analysis of the Kinematic Working Capability of Mechanisms , 1994 .

[9]  L. W. Tsai,et al.  The Jacobian Analysis of a Parallel Manipulator Using Reciprocal Screws , 1998 .

[10]  C. Gosselin,et al.  Singularity Analysis of 3-DOF Planar Parallel Mechanisms via Screw Theory , 2003 .

[11]  Moshe Shoham,et al.  Singularity analysis of a class of composite serial in-parallel robots , 2001, IEEE Trans. Robotics Autom..

[12]  Adolf Karger.  Projective Properties of Parallel Manipulators , 2004 .

[13]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[14]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[15]  Ilian A. Bonev,et al.  Geometric analysis of parallel mechanisms , 2002 .

[16]  J. McCarthy,et al.  The quartic singularity surfaces of planar platforms in the Clifford algebra of the projective plane , 1998 .

[17]  Jorge Angeles,et al.  Singularity analysis of three-legged parallel robots based on passive-joint velocities , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[18]  C. Barus.  A treatise on the theory of screws , 1998 .

[19]  Curtis L. Collins,et al.  The singularity analysis of an in-parallel hand controller for force-reflected teleoperation , 1995, IEEE Trans. Robotics Autom..

[20]  Jean-Pierre Merlet,et al.  Parallel manipulators. Part 2 : Theory. Singular configurations and Grassmann geometry , 1988 .

[21]  Joseph Duffy,et al.  A Direct Determination of the Instantaneous Kinematics of Fully Parallel Robot Manipulators , 1985 .

[22]  R. Ball.  A treatise on the theory of screws, by Sir Robert Stawell Ball. , .

[23]  C. Gosselin,et al.  On the quadratic nature of the singularity curves of planar three-degree-of-freedom parallel manipulators , 1995 .