Clinical, industrial, and research perspectives on powder bed fusion additively manufactured metal implants

[1]  A. Fatemi,et al.  Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects , 2018, International Journal of Fatigue.

[2]  F. Witte,et al.  Biodegradable Metals , 2018, Biomaterials Science.

[3]  Jie Zhou,et al.  Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering , 2018, Materials & Design.

[4]  C. Shuai,et al.  Microstructure, biodegradation, antibacterial and mechanical properties of ZK60-Cu alloys prepared by selective laser melting technique , 2018, Journal of Materials Science & Technology.

[5]  Dominic Eggbeer,et al.  Additively manufactured versus conventionally pressed cranioplasty implants: An accuracy comparison , 2018, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[6]  A. A. Zadpoor,et al.  Multiscale modeling of fatigue crack propagation in additively manufactured porous biomaterials , 2018, International Journal of Fatigue.

[7]  R. Poprawe,et al.  Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants , 2018, Journal of Materials Processing Technology.

[8]  L. Murr,et al.  Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing , 2018, Additive Manufacturing.

[9]  Wolfgang Schuhmann,et al.  Long-term implantable glucose biosensors , 2018, Current Opinion in Electrochemistry.

[10]  C. Shuai,et al.  Ag-Introduced Antibacterial Ability and Corrosion Resistance for Bio-Mg Alloys , 2018, BioMed research international.

[11]  A. Bandyopadhyay,et al.  Additive manufacturing of multi-material structures , 2018, Materials Science and Engineering: R: Reports.

[12]  Furqan A. Shah,et al.  Osseointegration of 3D printed microalloyed CoCr implants-Addition of 0.04% Zr to CoCr does not alter bone material properties. , 2018, Journal of biomedical materials research. Part A.

[13]  Lawrence E Murr,et al.  Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting , 2018 .

[14]  D. Campoccia,et al.  Implant infections: adhesion, biofilm formation and immune evasion , 2018, Nature Reviews Microbiology.

[15]  Yusheng Shi,et al.  Amorphous alloy strengthened stainless steel manufactured by selective laser melting: Enhanced strength and improved corrosion resistance , 2018 .

[16]  T. Niendorf,et al.  On the effect of internal channels and surface roughness on the high-cycle fatigue performance of Ti-6Al-4V processed by SLM , 2018 .

[17]  Hong Wu,et al.  Novel Mg-based alloys by selective laser melting for biomedical applications: microstructure evolution, microhardness and in vitro degradation behaviour , 2018 .

[18]  Lauren Thomas-Seale,et al.  The barriers to the progression of additive manufacture: perspectives from UK industry , 2018 .

[19]  Chee Kai Chua,et al.  A Review of Selective Laser Melted NiTi Shape Memory Alloy , 2018, Materials.

[20]  Yanjin Lu,et al.  The effect of 3 wt.% Cu addition on the microstructure, tribological property and corrosion resistance of CoCrW alloys fabricated by selective laser melting , 2018, Journal of Materials Science: Materials in Medicine.

[21]  Jean-Pierre Kruth,et al.  Selective laser melting produced layer-structured NiTi shape memory alloys with high damping properties and Elinvar effect , 2018 .

[22]  C. Tu,et al.  Uncemented three-dimensional-printed prosthetic reconstruction for massive bone defects of the proximal tibia , 2018, World Journal of Surgical Oncology.

[23]  Veronika Pilz,et al.  Projections of primary hip arthroplasty in Germany until 2040 , 2018, Acta orthopaedica.

[24]  Yusheng Shi,et al.  Titanium/hydroxyapatite (Ti/HA) gradient materials with quasi-continuous ratios fabricated by SLM: Material interface and fracture toughness , 2018 .

[25]  C. Puttlitz,et al.  Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model , 2018, The spine journal : official journal of the North American Spine Society.

[26]  Shu Beng Tor,et al.  Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review , 2018 .

[27]  Vladimir Brailovski,et al.  Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing , 2018 .

[28]  Shenghai Wang,et al.  Selective laser melting of a Ti-based bulk metallic glass , 2018 .

[29]  Chen Yang,et al.  3D Printed Fe Scaffolds with HA Nanocoating for Bone Regeneration. , 2018, ACS biomaterials science & engineering.

[30]  D. Pasini,et al.  Porous architected biomaterial for a tibial-knee implant with minimum bone resorption and bone-implant interface micromotion. , 2018, Journal of the mechanical behavior of biomedical materials.

[31]  Wu Songquan,et al.  CoCrWCu alloy with antibacterial activity fabricated by selective laser melting: Densification, mechanical properties and microstructural analysis , 2018 .

[32]  Bianca Maria Colosimo,et al.  In situ monitoring of selective laser melting of zinc powder via infrared imaging of the process plume , 2018 .

[33]  Moataz M. Attallah,et al.  Tailoring selective laser melting process for titanium drug-delivering implants with releasing micro-channels , 2018 .

[34]  Yong Liu,et al.  Effect of powder oxygen content on the microstructure and properties of Co–Cr dental alloys fabricated by selective laser melting , 2018 .

[35]  S. Tor,et al.  Carbide precipitation characteristics in additive manufacturing of Co-Cr-Mo alloy via selective electron beam melting , 2018 .

[36]  D. Lados,et al.  A Review of the Fatigue Properties of Additively Manufactured Ti-6Al-4V , 2018 .

[37]  Rainer Bader,et al.  Mechanical Properties of a Newly Additive Manufactured Implant Material Based on Ti-42Nb , 2018, Materials.

[38]  N. Gellrich,et al.  Osteointegration of Porous Poly-ε-Caprolactone-Coated and Previtalised Magnesium Implants in Critically Sized Calvarial Bone Defects in the Mouse Model , 2017, Materials.

[39]  H Weinans,et al.  Additively manufactured biodegradable porous magnesium. , 2017, Acta biomaterialia.

[40]  U. Kühn,et al.  Processing a glass-forming Zr-based alloy by selective laser melting , 2017 .

[41]  Yanjin Lu,et al.  Cytocompatibility of Cu-bearing Ti6Al4V alloys manufactured by selective laser melting , 2017, Materials Characterization.

[42]  Lin Liu,et al.  3D printing of crack-free high strength Zr-based bulk metallic glass composite by selective laser melting , 2017 .

[43]  I. Yadroitsava,et al.  Titanium Alloys Manufactured by In Situ Alloying During Laser Powder Bed Fusion , 2017 .

[44]  J. Moverare,et al.  Fatigue behaviour of additive manufactured Ti6Al4V, with as-built surfaces, exposed to variable amplitude loading , 2017 .

[45]  I. Yadroitsava,et al.  Functionalization of Biomedical Ti6Al4V via In Situ Alloying by Cu during Laser Powder Bed Fusion Manufacturing , 2017, Materials.

[46]  T. Sercombe,et al.  Antibacterial Titanium Produced Using Selective Laser Melting , 2017, JOM.

[47]  J. Ruan,et al.  Porous Nb-Ti-Ta alloy scaffolds for bone tissue engineering: Fabrication, mechanical properties and in vitro/vivo biocompatibility. , 2017, Materials science & engineering. C, Materials for biological applications.

[48]  Zhiming Yu,et al.  Cell responses to titanium treated by a sandblast-free method for implant applications. , 2017, Materials science & engineering. C, Materials for biological applications.

[49]  R. Banerjee,et al.  Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys , 2017, Science and technology of advanced materials.

[50]  E. De La Cruz-Burelo,et al.  Enhancing surface properties of breast implants by using electrospun silk fibroin. , 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

[51]  Z. Fang,et al.  Review of the Methods for Production of Spherical Ti and Ti Alloy Powder , 2017 .

[52]  Changjun Chen,et al.  Effect of laser processing parameters on porosity, microstructure and mechanical properties of porous Mg-Ca alloys produced by laser additive manufacturing , 2017 .

[53]  Damiano Pasini,et al.  Fully porous 3D printed titanium femoral stem to reduce stress‐shielding following total hip arthroplasty , 2017, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[54]  C. Yan,et al.  Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting , 2017 .

[55]  Q. Wang,et al.  Microstructure and property evolutions of titanium/nano-hydroxyapatite composites in-situ prepared by selective laser melting. , 2017, Journal of the mechanical behavior of biomedical materials.

[56]  Moataz M. Attallah,et al.  Surface Finish has a Critical Influence on Biofilm Formation and Mammalian Cell Attachment to Additively Manufactured Prosthetics. , 2017, ACS biomaterials science & engineering.

[57]  Yong Han,et al.  Effect of nano/micro-Ag compound particles on the bio-corrosion, antibacterial properties and cell biocompatibility of Ti-Ag alloys. , 2017, Materials science & engineering. C, Materials for biological applications.

[58]  M. Wevers,et al.  CoCr F75 scaffolds produced by additive manufacturing: Influence of chemical etching on powder removal and mechanical performance. , 2017, Journal of the mechanical behavior of biomedical materials.

[59]  Jun S. Kim,et al.  Anesthesia Duration as an Independent Risk Factor for Early Postoperative Complications in Adults Undergoing Elective ACDF , 2017, Global spine journal.

[60]  K. Mumtaz,et al.  In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V , 2017 .

[61]  S. Yeo,et al.  Surface modification of additive manufactured components by ultrasonic cavitation abrasive finishing , 2017 .

[62]  J. Kubásek,et al.  Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process. , 2017, Journal of the mechanical behavior of biomedical materials.

[63]  B. Piotrowski,et al.  Mechanical stability of custom-made implants: Numerical study of anatomical device and low elastic Young's modulus alloy. , 2017, Materials science & engineering. C, Materials for biological applications.

[64]  A. Demir,et al.  Selective laser melting of pure Zn with high density for biodegradable implant manufacturing , 2017 .

[65]  K. Hagihara,et al.  Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus , 2017 .

[66]  Wenbin Luo,et al.  Customized Knee Prosthesis in Treatment of Giant Cell Tumors of the Proximal Tibia: Application of 3-Dimensional Printing Technology in Surgical Design , 2017, Medical science monitor : international medical journal of experimental and clinical research.

[67]  V. Brailovski,et al.  Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components , 2017 .

[68]  C. Shuai,et al.  Microstructure Evolution and Biodegradation Behavior of Laser Rapid Solidified Mg–Al–Zn Alloy , 2017 .

[69]  Ana Civantos,et al.  Titanium Coatings and Surface Modifications: Toward Clinically Useful Bioactive Implants. , 2017, ACS biomaterials science & engineering.

[70]  A. Demir,et al.  Processability of pure Zn and pure Fe by SLM for biodegradable metallic implant manufacturing , 2017 .

[71]  E. Tobin.  Recent coating developments for combination devices in orthopedic and dental applications: A literature review☆ , 2017, Advanced drug delivery reviews.

[72]  R. Hague,et al.  An investigation into reinforced and functionally graded lattice structures , 2017 .

[73]  Yanjin Lu,et al.  Preliminary study on the corrosion resistance, antibacterial activity and cytotoxicity of selective-laser-melted Ti6Al4V-xCu alloys. , 2017, Materials science & engineering. C, Materials for biological applications.

[74]  V. Alt.  Antimicrobial coated implants in trauma and orthopaedics-A clinical review and risk-benefit analysis. , 2017, Injury.

[75]  C. Shuai,et al.  Biodegradation Resistance and Bioactivity of Hydroxyapatite Enhanced Mg-Zn Composites via Selective Laser Melting , 2017, Materials.

[76]  M. Brandt,et al.  In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance , 2017 .

[77]  M. Qi,et al.  Effect of copper addition on mechanical properties, corrosion resistance and antibacterial property of 316L stainless steel. , 2017, Materials science & engineering. C, Materials for biological applications.

[78]  V. Barão,et al.  Is there scientific evidence favoring the substitution of commercially pure titanium with titanium alloys for the manufacture of dental implants? , 2017, Materials science & engineering. C, Materials for biological applications.

[79]  R. Misra,et al.  Functional response of osteoblasts in functionally gradient titanium alloy mesh arrays processed by 3D additive manufacturing. , 2017, Colloids and surfaces. B, Biointerfaces.

[80]  Wai Yee Yeong,et al.  Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion. , 2017 .

[81]  Cheng Yan,et al.  Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction , 2017 .

[82]  P. Terriault,et al.  Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing , 2017 .

[83]  E. V. Borisov,et al.  Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties , 2017 .

[84]  C. Johansson,et al.  Cobalt-chromium alloys in fixed prosthodontics in Sweden , 2017, Acta biomaterialia odontologica Scandinavica.

[85]  Youwei Yuan,et al.  Improved mechanical properties of the new Ti-15Ta-xZr alloys fabricated by selective laser melting for biomedical application , 2016 .

[86]  Simon Ford,et al.  Additive manufacturing and sustainability: an exploratory study of the advantages and challenges , 2016 .

[87]  Erik Hofmann,et al.  Impact of additive manufacturing technology adoption on supply chain management processes and components , 2016 .

[88]  T. Sercombe,et al.  Antimicrobial Cu-bearing stainless steel scaffolds. , 2016, Materials science & engineering. C, Materials for biological applications.

[89]  Wei Li,et al.  Incorporating simvastatin/poloxamer 407 hydrogel into 3D-printed porous Ti6Al4V scaffolds for the promotion of angiogenesis, osseointegration and bone ingrowth , 2016, Biofabrication.

[90]  P. Gemmel,et al.  3D-printing techniques in a medical setting: a systematic literature review , 2016, Biomedical engineering online.

[91]  Amirhesam Amerinatanzi,et al.  Fabrication of NiTi through additive manufacturing: A review , 2016 .

[92]  Ke Yang,et al.  A novel coping metal material CoCrCu alloy fabricated by selective laser melting with antimicrobial and antibiofilm properties. , 2016, Materials science & engineering. C, Materials for biological applications.

[93]  C. Emmelmann,et al.  Additive Manufacturing of Metals , 2016 .

[94]  C. Hutchinson,et al.  Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid. , 2016, Acta biomaterialia.

[95]  Galina Kasperovich,et al.  Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting , 2016 .

[96]  P. Prangnell,et al.  Porosity Regrowth During Heat Treatment of Hot Isostatically Pressed Additively Manufactured Titanium Components , 2016 .

[97]  Devis Bellucci,et al.  Functionally graded materials for orthopedic applications - an update on design and manufacturing. , 2016, Biotechnology advances.

[98]  E. Alp,et al.  Incidence and economic burden of prosthetic joint infections in a university hospital: A report from a middle-income country. , 2016, Journal of infection and public health.

[99]  Moataz M. Attallah,et al.  Adding functionality with additive manufacturing: Fabrication of titanium-based antibiotic eluting implants. , 2016, Materials science & engineering. C, Materials for biological applications.

[100]  H Weinans,et al.  Antibacterial Behavior of Additively Manufactured Porous Titanium with Nanotubular Surfaces Releasing Silver Ions. , 2016, ACS applied materials & interfaces.

[101]  Matthew Di Prima,et al.  Additively manufactured medical products – the FDA perspective , 2016, 3D Printing in Medicine.

[102]  Yufeng Zheng,et al.  Recent advances in bulk metallic glasses for biomedical applications. , 2016, Acta biomaterialia.

[103]  Aleksandar Matic,et al.  Long-term osseointegration of 3D printed CoCr constructs with an interconnected open-pore architecture prepared by electron beam melting. , 2016, Acta biomaterialia.

[104]  Richard Leach,et al.  Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing , 2016 .

[105]  Nam Phan,et al.  Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research , 2016 .

[106]  R. Dehoff,et al.  Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM) , 2016 .

[107]  Ming-Wei Wu,et al.  The positive effect of hot isostatic pressing on improving the anisotropies of bending and impact properties in selective laser melted Ti-6Al-4V alloy , 2016 .

[108]  Wai Yee Yeong,et al.  Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties , 2016 .

[109]  Wei Xu,et al.  Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review. , 2016, Biomaterials.

[110]  Yangde Li,et al.  Vascularized bone grafting fixed by biodegradable magnesium screw for treating osteonecrosis of the femoral head. , 2016, Biomaterials.

[111]  S. Mullens,et al.  Electrophoretic deposition of hydroxyapatite and hydroxyapatite–alginate on rapid prototyped 3D Ti6Al4V scaffolds , 2016, Journal of Materials Science.

[112]  Tomiharu Matsushita,et al.  Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment. , 2016, Materials science & engineering. C, Materials for biological applications.

[113]  T. Mower,et al.  Mechanical behavior of additive manufactured, powder-bed laser-fused materials , 2016 .

[114]  Diego Mantovani,et al.  Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy , 2016, Proceedings of the National Academy of Sciences.

[115]  Matthias Gieseke,et al.  Poly-ε-caprolactone Coated and Functionalized Porous Titanium and Magnesium Implants for Enhancing Angiogenesis in Critically Sized Bone Defects , 2015, International journal of molecular sciences.

[116]  A. Dawood,et al.  3D printing in dentistry , 2015, BDJ.

[117]  J. Eckert,et al.  Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study , 2015 .

[118]  F. Benazzo,et al.  Clinical and radiographic outcomes of a trabecular titanium™ acetabular component in hip arthroplasty: results at minimum 5 years follow-up , 2015, BMC Musculoskeletal Disorders.

[119]  Zheng Guo,et al.  Implantation of customized 3-D printed titanium prosthesis in limb salvage surgery: a case series and review of the literature , 2015, World Journal of Surgical Oncology.

[120]  F. Walther,et al.  Computed tomography for characterization of fatigue performance of selective laser melted parts , 2015 .

[121]  Zemin Wang,et al.  Influence of element vaporization on formability, composition, microstructure, and mechanical performance of the selective laser melted Mg–Zn–Zr components , 2015 .

[122]  S M Giannitelli,et al.  Combined additive manufacturing approaches in tissue engineering. , 2015, Acta biomaterialia.

[123]  Frank Witte,et al.  Reprint of: The history of biodegradable magnesium implants: A review. , 2015, Acta biomaterialia.

[124]  Veit Rohde,et al.  German Cranial Reconstruction Registry (GCRR): protocol for a prospective, multicentre, open registry , 2015, BMJ Open.

[125]  Lai‐Chang Zhang,et al.  Processing and properties of topologically optimised biomedical Ti-24Nb-4Zr-8Sn scaffolds manufactured by selective laser melting , 2015 .

[126]  Yingjun Wang,et al.  Concentration ranges of antibacterial cations for showing the highest antibacterial efficacy but the least cytotoxicity against mammalian cells: implications for a new antibacterial mechanism. , 2015, Chemical research in toxicology.

[127]  Wei Li,et al.  Selective laser melting of stainless-steel/nano-hydroxyapatite composites for medical applications: Microstructure, element distribution, crack and mechanical properties , 2015 .

[128]  Robert L. Bowerman,et al.  Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain , 2015 .

[129]  M. Alaker,et al.  A cost analysis of elective hip revision arthroplasty versus periprosthetic hip fracture management in a district general hospital , 2015 .

[130]  J. Eschweiler,et al.  Effect of subsequent Hot Isostatic Pressing on mechanical properties of ASTM F75 alloy produced by Selective Laser Melting , 2015 .

[131]  N. Gellrich,et al.  Comparison of Selective Laser Melted Titanium and Magnesium Implants Coated with PCL , 2015, International journal of molecular sciences.

[132]  F. Piller,et al.  Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited , 2015 .

[133]  Wei Liu,et al.  Textures formed in a CoCrMo alloy by selective laser melting , 2015 .

[134]  H. Maier,et al.  Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications , 2015, Metallurgical and Materials Transactions A.

[135]  Abdul Samad Mohammed,et al.  Wear Characteristics of Metallic Biomaterials: A Review , 2015, Materials.

[136]  R. Bentley,et al.  Custom-made titanium cranioplasty: early and late complications of 151 cranioplasties and review of the literature. , 2015, International journal of oral and maxillofacial surgery.

[137]  Dingfei Zhang,et al.  Experimental Investigation on Selective Laser Melting of Bulk Net-Shape Pure Magnesium , 2015 .

[138]  L. Chambrone,et al.  Efficacy of standard (SLA) and modified sandblasted and acid-etched (SLActive) dental implants in promoting immediate and/or early occlusal loading protocols: a systematic review of prospective studies. , 2015, Clinical oral implants research.

[139]  C. Cooper,et al.  Future projections of total hip and knee arthroplasty in the UK: results from the UK Clinical Practice Research Datalink. , 2015, Osteoarthritis and cartilage.

[140]  Yuichiro Koizumi,et al.  Osseointegration Enhancement by Zr doping of Co-Cr-Mo Implants Fabricated by Electron Beam Melting , 2015 .

[141]  Iain Todd,et al.  XCT analysis of the influence of melt strategies on defect population in Ti?6Al?4V components manufactured by Selective Electron Beam Melting , 2015 .

[142]  M. Bezuidenhout,et al.  Delivery of Antibiotics from Cementless Titanium-Alloy Cubes May Be a Novel Way to Control Postoperative Infections , 2015, BioMed research international.

[143]  Ma Qian,et al.  Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting , 2015 .

[144]  N. Liu,et al.  Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting , 2015, JOM.

[145]  C. Dinu,et al.  Selective laser melted titanium implants: a new technique for the reconstruction of extensive zygomatic complex defects , 2015, Maxillofacial plastic and reconstructive surgery.

[146]  K. Fountas,et al.  Cranioplasty Optimal Timing in Cases of Decompressive Craniectomy after Severe Head Injury: a Systematic Literature Review , 2014 .

[147]  Zhigang Xu,et al.  Recent advances on the development of magnesium alloys for biodegradable implants. , 2014, Acta biomaterialia.

[148]  Richard Cook,et al.  Bone and metal: an orthopaedic perspective on osseointegration of metals. , 2014, Acta biomaterialia.

[149]  Brent Stucker,et al.  Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes , 2014 .

[150]  M. Peltz,et al.  Characterization of Metal Powders Used for Additive Manufacturing , 2014, Journal of research of the National Institute of Standards and Technology.

[151]  Wenjun Zhu,et al.  Bio-inspired citrate functionalized apatite coating on rapid prototyped titanium scaffold , 2014 .

[152]  Kaiwen Wei,et al.  Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy , 2014 .

[153]  E. Chlebus,et al.  Chemical polishing of scaffolds made of Ti–6Al–7Nb alloy by additive manufacturing , 2014 .

[154]  S. M. Ahmadi,et al.  Effects of bio-functionalizing surface treatments on the mechanical behavior of open porous titanium biomaterials. , 2014, Journal of the mechanical behavior of biomedical materials.

[155]  Mark Stanford,et al.  An investigation into the flexural characteristics of functionally graded cobalt chrome femoral stems manufactured using selective laser melting , 2014 .

[156]  C. Menapace,et al.  Selective laser melting of Ti6Al7Nb with hydroxyapatite addition , 2014 .

[157]  G. Wallace,et al.  Bioactive Coatings for Orthopaedic Implants—Recent Trends in Development of Implant Coatings , 2014, International journal of molecular sciences.

[158]  O. Sorițău,et al.  Comparative in vitro study regarding the biocompatibility of titanium-base composites infiltrated with hydroxyapatite or silicatitanate , 2014, Journal of biological engineering.

[159]  A. Helmy,et al.  Proposal for establishment of the UK Cranial Reconstruction Registry (UKCRR) , 2014, British journal of neurosurgery.

[160]  J.-P. Kruth,et al.  Microstructure and mechanical properties of a novel β titanium metallic composite by Selective Laser Melting , 2014 .

[161]  William E. Frazier,et al.  Metal Additive Manufacturing: A Review , 2014, Journal of Materials Engineering and Performance.

[162]  André Luiz Jardini,et al.  Customised titanium implant fabricated in additive manufacturing for craniomaxillofacial surgery , 2014 .

[163]  Filippo Berto,et al.  Three-dimensional finite element analyses of functionally graded femoral prostheses with different geometrical configurations , 2014 .

[164]  M. Ramulu,et al.  Fatigue performance evaluation of selective laser melted Ti–6Al–4V , 2014 .

[165]  B. Thakur,et al.  Complications of titanium cranioplasty—a retrospective analysis of 174 patients , 2014, Acta Neurochirurgica.

[166]  A. A. Zadpoor,et al.  Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting , 2014 .

[167]  G. Bergmann,et al.  Standardized Loads Acting in Hip Implants , 2014, PloS one.

[168]  J. Epinette.  Long lasting outcome of hydroxyapatite-coated implants in primary knee arthroplasty: a continuous series of two hundred and seventy total knee arthroplasties at fifteen to twenty two years of clinical follow-up , 2014, International Orthopaedics.

[169]  A. A. Zadpoor,et al.  Fatigue behavior of porous biomaterials manufactured using selective laser melting. , 2013, Materials science & engineering. C, Materials for biological applications.

[170]  Zhi-Yong Zhang,et al.  Porous titanium-6 aluminum-4 vanadium cage has better osseointegration and less micromotion than a poly-ether-ether-ketone cage in sheep vertebral fusion. , 2013, Artificial organs.

[171]  H. Tse,et al.  Implantable sensors for heart failure monitoring , 2013 .

[172]  E Jones,et al.  Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants. , 2013, Materials science & engineering. C, Materials for biological applications.

[173]  F. Walther,et al.  High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting , 2013 .

[174]  Moataz M. Attallah,et al.  Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V , 2013 .

[175]  Veit Rohde,et al.  Cranioplasty after decompressive hemicraniectomy: Underestimated surgery-associated complications? , 2013, Clinical Neurology and Neurosurgery.

[176]  M. Bäumler.  [Which non-clinical factors influence the use of innovative implants? The example of drug-releasing coronary stents in patients with acute myocardial infarction: a multilevel regression analysis]. , 2013, Gesundheitswesen (Bundesverband der Arzte des Offentlichen Gesundheitsdienstes (Germany)).

[177]  A. Straube,et al.  Early cranioplasty may improve outcome in neurological patients with decompressive craniectomy , 2013, Brain injury.

[178]  C. Stukenborg-Colsman,et al.  Biodegradable magnesium-based screw clinically equivalent to titanium screw in hallux valgus surgery: short term results of the first prospective, randomized, controlled clinical pilot study , 2013, Biomedical engineering online.

[179]  Liang Hou,et al.  Additive manufacturing and its societal impact: a literature review , 2013 .

[180]  H. Horiguchi,et al.  Impact of age and comorbidity burden on mortality and major complications in older adults undergoing orthopaedic surgery: an analysis using the Japanese diagnosis procedure combination database , 2013, BMC Musculoskeletal Disorders.

[181]  Fan Yang,et al.  The future of biologic coatings for orthopaedic implants. , 2013, Biomaterials.

[182]  R. Tannenbaum,et al.  The roles of titanium surface micro/nanotopography and wettability on the differential response of human osteoblast lineage cells. , 2013, Acta biomaterialia.

[183]  Raimund Erbel,et al.  Safety and performance of the drug-eluting absorbable metal scaffold (DREAMS) in patients with de-novo coronary lesions: 12 month results of the prospective, multicentre, first-in-man BIOSOLVE-I trial , 2013, The Lancet.

[184]  H. Maier,et al.  On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance , 2013 .

[185]  Kwon Ho Koo,et al.  Toxicological Evaluations of Rare Earths and Their Health Impacts to Workers: A Literature Review , 2013, Safety and health at work.

[186]  J. Kruth,et al.  Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties , 2012 .

[187]  M. Niinomi,et al.  Development of new metallic alloys for biomedical applications. , 2012, Acta biomaterialia.

[188]  R. Hague,et al.  The design of impact absorbing structures for additive manufacture , 2012 .

[189]  A. A. Bakir,et al.  Porous Biodegradable Metals for Hard Tissue Scaffolds: A Review , 2012, International journal of biomaterials.

[190]  John A. Jansen,et al.  Surface Engineering for Bone Implants: A Trend from Passive to Active Surfaces , 2012 .

[191]  Chang-Hyun Lee,et al.  Analysis of the factors influencing bone graft infection after cranioplasty , 2012, The journal of trauma and acute care surgery.

[192]  Stephen D Laycock,et al.  3-D printout of a DICOM file to aid surgical planning in a 6 year old patient with a large scapular osteochondroma complicating congenital diaphyseal aclasia. , 2012, Journal of radiology case reports.

[193]  H Van Oosterwyck,et al.  The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. , 2012, Acta biomaterialia.

[194]  Wilhelm Meiners,et al.  Selective Laser Melting , 2012 .

[195]  J. Kruth,et al.  Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method , 2012 .

[196]  S. Ferguson,et al.  Osseointegration and biocompatibility of different metal implants - a comparative experimental investigation in sheep , 2012, BMC Musculoskeletal Disorders.

[197]  A. Sugar,et al.  The minimum time for cranioplasty insertion from craniectomy is six months to reduce risk of infection- a case series of 82 patients , 2012, British journal of neurosurgery.

[198]  I. Yadroitsev,et al.  Selective laser sintering/melting of nitinol–hydroxyapatite composite for medical applications , 2011 .

[199]  C. Colin,et al.  As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting , 2011 .

[200]  R. Tannenbaum,et al.  The effects of combined micron-/submicron-scale surface roughness and nanoscale features on cell proliferation and differentiation. , 2011, Biomaterials.

[201]  G. Cappellaro,et al.  Diffusion of medical technology: the role of financing. , 2011, Health policy.

[202]  David W. Rattner,et al.  Does speed matter? The impact of operative time on outcome in laparoscopic surgery , 2011, Surgical Endoscopy.

[203]  Xiaojun Yu,et al.  Differential response of Staphylococci and osteoblasts to varying titanium surface roughness. , 2011, Biomaterials.

[204]  Vamsi Krishna Balla,et al.  Porous tantalum structures for bone implants: fabrication, mechanical and in vitro biological properties. , 2010, Acta biomaterialia.

[205]  S. Cowin,et al.  Topological optimization in hip prosthesis design , 2010, Biomechanics and modeling in mechanobiology.

[206]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[207]  Elhadi Sariali,et al.  Total hip arthroplasty revision due to infection: a cost analysis approach. , 2010, Orthopaedics & traumatology, surgery & research : OTSR.

[208]  Santhisagar Vaddiraju,et al.  Emerging synergy between nanotechnology and implantable biosensors: a review. , 2010, Biosensors & bioelectronics.

[209]  Richard J. Bibb,et al.  Rapid manufacture of custom‐fitting surgical guides , 2009 .

[210]  Liang Hao,et al.  Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development , 2009 .

[211]  Timothy Douglas,et al.  Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering. , 2009, Tissue engineering. Part C, Methods.

[212]  P. Layrolle,et al.  Osteoblastic cell behaviour on different titanium implant surfaces. , 2008, Acta biomaterialia.

[213]  Thomas J Webster,et al.  Enhanced osteoblast functions on anodized titanium with nanotube-like structures. , 2008, Journal of biomedical materials research. Part A.

[214]  O. Harrysson,et al.  Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology , 2008 .

[215]  David Uttley,et al.  The Atkinson Morley's Hospital joint neurosurgical-maxillofacial procedures: cranioplasty case series 1985-2003. , 2007, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[216]  B Vamsi Krishna,et al.  Processing and biocompatibility evaluation of laser processed porous titanium. , 2007, Acta biomaterialia.

[217]  C. Rorabeck,et al.  The operation of the century: total hip replacement , 2007, The Lancet.

[218]  C. V. van Blitterswijk,et al.  Biological performance in goats of a porous titanium alloy-biphasic calcium phosphate composite. , 2007, Biomaterials.

[219]  S. Kurtz,et al.  Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030. , 2007, The Journal of bone and joint surgery. American volume.

[220]  J. I. Qazi,et al.  Titanium alloys for biomedical applications , 2006 .

[221]  Yongxin Zhou,et al.  Comparison of isotropic and orthotropic material property assignments on femoral finite element models under two loading conditions. , 2006, Medical engineering & physics.

[222]  M. von Walter,et al.  Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming. , 2006, Biomaterials.

[223]  Charles B. Wilson.  Adoption of new surgical technology , 2006, BMJ : British Medical Journal.

[224]  E. Brunner,et al.  Growth behavior, matrix production, and gene expression of human osteoblasts in defined cylindrical titanium channels. , 2004, Journal of biomedical materials research. Part A.

[225]  W. Zimmerli,et al.  Management of Infection Associated with Prosthetic Joints , 2003, Infection.

[226]  Megan C Frost,et al.  Implantable chemical sensors for real-time clinical monitoring: progress and challenges. , 2002, Current opinion in chemical biology.

[227]  W. Millar,et al.  Hip and knee replacement. , 2002, Health reports.

[228]  M. Mabuchi,et al.  Processing and mechanical properties of autogenous titanium implant materials , 2002, Journal of materials science. Materials in medicine.

[229]  J. Costerton,et al.  Antibiotic resistance of bacteria in biofilms , 2001, The Lancet.

[230]  J. Rho,et al.  Anisotropy of Young's modulus of human tibial cortical bone , 2000, Medical and Biological Engineering and Computing.

[231]  Jaroslav Kováčik,et al.  Correlation between Young's modulus and porosity in porous materials , 1999 .

[232]  C. Lohmann,et al.  Response of MG63 osteoblast-like cells to titanium and titanium alloy is dependent on surface roughness and composition. , 1998, Biomaterials.

[233]  P J Gregson,et al.  Development of fatigue lifetime predictive test methods for hip implants: part I. Test methodology. , 1998, Biomaterials.

[234]  Y. Oka,et al.  The impact angle dependence of erosion damage caused by solid particle impact , 1997 .

[235]  B. Kasemo,et al.  Bone response to surface-modified titanium implants: studies on the early tissue response to machined and electropolished implants with different oxide thicknesses. , 1996, Biomaterials.

[236]  B. Rabin,et al.  Characterization of entrapped gases in rapidly solidified powders , 1990 .

[237]  J. Galante,et al.  A comparative study of porous coatings in a weight-bearing total hip-arthroplasty model. , 1986, The Journal of bone and joint surgery. American volume.

[238]  V. Gornitz,et al.  Morphotectonic analysis of the Hazara arc region of the Himalayas, north Pakistan and northwest India , 1981 .

[239]  S F Hulbert,et al.  Potential of ceramic materials as permanently implantable skeletal prostheses. , 1970, Journal of biomedical materials research.

[240]  Weidong Song,et al.  Additively-manufactured functionally graded Ti-6Al-4V lattice structures with high strength under static and dynamic loading: Experiments , 2018 .

[241]  Kurosh Darvish,et al.  Selective laser melting of Co-29Cr-6Mo alloy with laser power 180–360 W: Cellular growth, intercellular spacing and the related thermal condition , 2018 .

[242]  A. Panesar,et al.  Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing , 2018 .

[243]  K. Mumtaz,et al.  In-situ residual stress reduction , martensitic decomposition and mechanical properties enhancement through high temperature powder bed preheating of Selective Laser , 2018 .

[244]  D. Dean,et al.  Resorbable bone fixation alloys, forming, and post-fabrication treatments. , 2017, Materials science & engineering. C, Materials for biological applications.

[245]  Adedeji Aremu,et al.  A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing , 2017 .

[246]  Christian Coddet,et al.  On the texture, phase and tensile properties of commercially pure Ti produced via selective laser melting assisted by static magnetic field. , 2017, Materials science & engineering. C, Materials for biological applications.

[247]  Tobias Melz,et al.  Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting , 2017 .

[248]  A. Sarmast,et al.  Cranioplasty: Indications, procedures, and outcome - An institutional experience. , 2017, Surgical neurology international.

[249]  J. Kruth,et al.  Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting. , 2017, Acta biomaterialia.

[250]  J. Bosco,et al.  Strategies for reducing implant costs in the revision total knee arthroplasty episode of care , 2017 .

[251]  K. Hagihara,et al.  Control of Morphological and Microstructural Anisotropy through Powder-Based Metal Additive Manufacturing , 2017 .

[252]  Md. Mostafizur Rahman,et al.  Optimising the dynamic process parameters in electron beam melting (EBM) to achieve internal defect quality control , 2017 .

[253]  C. Lind,et al.  A randomized controlled trial comparing autologous cranioplasty with custom-made titanium cranioplasty. , 2017, Journal of neurosurgery.

[254]  T. Webster,et al.  Orthopedic implant biomaterials with both osteogenic and anti-infection capacities and associated in vivo evaluation methods. , 2017, Nanomedicine : nanotechnology, biology, and medicine.

[255]  S. Matsuda,et al.  Title Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo , 2017 .

[256]  J. Glasschroeder,et al.  Process Influences on Laser-beam Melting of the Magnesium Alloy AZ91 , 2016 .

[257]  D. Schwarze,et al.  In vivo implantation of porous titanium alloy implants coated with magnesium-doped octacalcium phosphate and hydroxyapatite thin films using pulsed laser depostion. , 2015, Journal of biomedical materials research. Part B, Applied biomaterials.

[258]  Fransisco Medina,et al.  Reducing metal alloy powder costs for use in powder bed fusion additive manufacturing: Improving the economics for production , 2013 .

[259]  J. Kruth,et al.  The effect of pore geometry on the mechanical properties of selective laser melted Ti-13Nb-13Zr scaffolds , 2013 .

[260]  Mihai Stoica,et al.  Processing metallic glasses by selective laser melting , 2013 .

[261]  E. Chlebus,et al.  The ability of S.aureus to form biofilm on the Ti-6Al-7Nb scaffolds produced by Selective Laser Melting and subjected to the different types of surface modifications. , 2013, Acta of bioengineering and biomechanics.

[262]  H Meier,et al.  The biocompatibility of dense and porous Nickel-Titanium produced by selective laser melting. , 2013, Materials science & engineering. C, Materials for biological applications.

[263]  Christian Rotsch,et al.  Topology-Optimized Implants: Medical Requirements and Partial Aspects of a Design Engineering Process Chain , 2013 .

[264]  Mager.  RESEARCH ON INFILTRATING BIOCOMPATIBLE FILLERS TO PRODUCE COMPOSITE IMPLANTS , 2013 .

[265]  P. Lipinski,et al.  Development and mechanical characterization of porous titanium bone substitutes. , 2012, Journal of the mechanical behavior of biomedical materials.

[266]  W. Hubei,et al.  Biomedical Applications , 2011 .

[267]  Derek J. W. McMinn,et al.  Modern hip resurfacing , 2009 .

[268]  M. Froimson,et al.  Minimum 10-year results of a tapered, titanium, hydroxyapatite-coated hip stem: an independent review. , 2007, The Journal of arthroplasty.

[269]  Berend Denkena,et al.  Biocompatible Magnesium Alloys as Absorbable Implant Materials – Adjusted Surface and Subsurface Properties by Machining Processes , 2007 .

[270]  W. Winkelmann,et al.  Interleukin-6, procalcitonin and TNF-alpha: markers of peri-prosthetic infection following total joint replacement. , 2007, The Journal of bone and joint surgery. British volume.

[271]  J. Malley,et al.  Younger Adults' Understanding of Questions for a Service User Experience Survey. Funded/commissioned by: The Health and Social Care Information Centre , 2006 .

[272]  K. Osakada,et al.  Residual Stress within Metallic Model Made by Selective Laser Melting Process , 2004 .

[273]  G. A. Webster,et al.  Residual stress distributions and their influence on fatigue lifetimes , 2001 .

[274]  R. Huiskes,et al.  Stress shielding after total knee replacement may cause bone resorption in the distal femur. , 1997, The Journal of bone and joint surgery. British volume.

[275]  C. Engh,et al.  Producing and avoiding stress shielding. Laboratory and clinical observations of noncemented total hip arthroplasty. , 1992, Clinical orthopaedics and related research.