论文信息 - Local melting and shape controlling of solder joint via induction heating

Local melting and shape controlling of solder joint via induction heating

Abstract A rapid yet simple methodology to form the solder joints used in electronic packaging has been demonstrated through an induction heating system in this paper. The objective is to control the shapes of the solder joints precisely and form the hourglass-shaped solder joint using local melting phenomenon. For Sn–Ag eutectic solder bullet-shaped solder bumps and hourglass-shaped solder joints can be obtained easily within 2.3 s. The reason for the formation of hourglass-shaped solder joints has been analyzed using different morphologies of Ag 3 Sn intermetallic compound (IMC), and is explained by the non-uniform temperature distribution caused by a local melting phenomenon and skin effect.

[1] David A. Dillard,et al. Stacked solder bumping technology for improved solder joint reliability , 2001, Microelectron. Reliab..

[2] B. Yeung,et al. Evaluation and optimization of package processing and design through solder joint profile prediction , 2003 .

[3] Katherine C. Chen,et al. Formation and growth of intermetallics around metallic particles in eutectic Sn-Ag solder , 2003 .

[4] Bor Zen Hong,et al. Ceramic column grid array technology with coated solder columns , 2000, 2000 Proceedings. 50th Electronic Components and Technology Conference (Cat. No.00CH37070).

[5] Ryohei Satoh,et al. Thermal fatigue life of Pb-Sn alloy interconnections , 1991 .

[6] Qiang Yu,et al. A study of the effects of BGA solder geometry on fatigue life and reliability assessment , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).

[7] T. Kawahara. SuperCSP/sup TM/ , 2000 .

[8] Chang-Chun Lee,et al. Enhancing the Reliability of Wafer Level Packaging by Using Solder Joints Layout Design , 2006, IEEE Transactions on Components and Packaging Technologies.

[9] Guo-Quan Lu,et al. Effects of solder joint shape and height on thermal fatigue lifetime , 2003 .

[10] V. Kripesh,et al. Fatigue and Bridging Study of High-Aspect-Ratio Multicopper-Column Flip-Chip Interconnects Through Solder Joint Shape Modeling , 2006, IEEE Transactions on Components and Packaging Technologies.