A flameless catalytic combustion-based thermoelectric generator for powering electronic instruments on gas pipelines

This paper presents a flameless catalytic combustion-based thermoelectric power generator that uses commercial thermoelectric modules. The structure of the thermoelectric generator (TEG) is introduced and the power performance is measured based on a designed circuit system. The open circuit voltage of the TEG is about 7.3V. The maximum power output can reach up to 6.5W when the load resistance matches the TEG internal resistance. However, the system output is sensitive to load variation. To improve this characteristic, maximum power point tracking technique is used and results in an open circuit voltage of 13.8V. The improved characteristic makes the TEG system a good charger to keep the lead acid battery fully charged so as to meet the needs of electronic instruments on gas pipelines. In addition, the combustion features have been investigated based on the temperature measurement. Test results show that the uniformity of combustion heat transfer process and the combustion chamber structure play important roles in improving system power output. It can get an optimized TEG system (maximum power output: 8.3W) by uniformly filling a thermal insulation material (asbestos) to avoid a non-uniform combustion heat transfer process.

[1]  Jianlin Yu,et al.  Experimental study on low-temperature waste heat thermoelectric generator , 2009 .

[2]  I. Lee,et al.  Catalytic combustion of alcohols for microburner applications , 2010 .

[3]  K. Qiu,et al.  A Natural-Gas-Fired Thermoelectric Power Generation System , 2009 .

[4]  Jensak Eakburanawat,et al.  Development of a thermoelectric battery-charger with microcontroller-based maximum power point tracking technique , 2006 .

[5]  Feng Wang,et al.  Simulation on thermoelectric device with hydrogen catalytic combustion , 2012 .

[6]  Dirk Roekaerts,et al.  Behavior of a 300kWth regenerative multi-burner flameless oxidation furnace , 2011 .

[7]  Cheng-Ting Hsu,et al.  Experiments and simulations on low-temperature waste heat harvesting system by thermoelectric power generators , 2011 .

[8]  Yiwu Weng,et al.  Thermodynamic characteristics of a low concentration methane catalytic combustion gas turbine , 2010 .

[9]  Xiaolong Gou,et al.  Modeling, experimental study and optimization on low-temperature waste heat thermoelectric generator system , 2010 .

[10]  J. Szybist,et al.  Effect of heat exchanger material and fouling on thermoelectric exhaust heat recovery , 2011 .

[11]  Daiqing Zhao,et al.  Experimental study of a plat-flame micro combustor burning DME for thermoelectric power generation , 2011 .

[12]  Jean-Pierre Bédécarrats,et al.  Thermoelectric power generation from biomass cook stoves , 2010 .

[13]  D. G. Norton,et al.  Catalytic microcombustors with integrated thermoelectric elements for portable power production , 2006 .

[14]  Min Chen,et al.  Energy efficiency analysis and impact evaluation of the application of thermoelectric power cycle to today's CHP systems , 2010 .

[15]  A. Masri,et al.  Catalytic combustion of selected hydrocarbon fuels on platinum: Reactivity and hetero-homogeneous interactions , 2012 .

[16]  M. Esashi,et al.  High-energy density miniature thermoelectric generator using catalytic combustion , 2006, Journal of Microelectromechanical Systems.

[17]  Rosemary Norman,et al.  Low grade thermal energy sources and uses from the process industry in the UK , 2012 .

[18]  L. Bell.  Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems , 2008, Science.

[19]  K. T. Chau,et al.  Thermoelectric automotive waste heat energy recovery using maximum power point tracking , 2009 .

[20]  K. Qiu,et al.  Development of a novel cascading TPV and TE power generation system , 2012 .