Effect of vertical electromagnetic stirring on solute distribution in billet continuous casting process
暂无分享,去创建一个
[1] Y. Delannoy,et al. Numerical Simulation of Macrosegregation Formation in a 2.45 ton Steel Ingot Using a Three-Phase Equiaxed Solidification Model , 2021 .
[2] Y. Delannoy,et al. Numerical modeling of a benchmark experiment on equiaxed solidification of a Sn–Pb alloy with electromagnetic stirring and natural convection , 2020, International Journal of Heat and Mass Transfer.
[3] Brian G. Thomas,et al. Electromagnetic Forces in Continuous Casting of Steel Slabs , 2019, Metals.
[4] Zhu,et al. Numerical Simulation of Solidification Behavior and Solute Transport in Slab Continuous Casting with S-EMS , 2019, Metals.
[5] A. Ludwig,et al. Volume-Averaged Modeling of Multiphase Flow Phenomena during Alloy Solidification , 2019, Metals.
[6] M. Založnik,et al. Application of an Equiaxed Grain Growth and Transport Model to Study Macrosegregation in a DC Casting Experiment , 2019, Metallurgical and Materials Transactions A.
[7] Fei Wang,et al. Influence of lower frequency electromagnetic field on dendritic crystal growth in special alloys , 2017 .
[8] Zhuang Li,et al. Dendrite Growth Characteristics and Segregation Control of Bearing Steel Billet with Rotational Electromagnetic Stirring , 2017 .
[9] P. Jia,et al. Influence of electromagnetic stirring (EMS) on the microstructure and mechanical property of Incoloy825 superalloy , 2017 .
[10] Leonardo Barboza Trindade,et al. Modeling of Solidification in Continuous Casting Round Billet with Mold Electromagnetic Stirring (M‐EMS) , 2017 .
[11] Miao‐yong Zhu,et al. Center Segregation with Final Electromagnetic Stirring in Billet Continuous Casting Process , 2017, Metallurgical and Materials Transactions B.
[12] A. Karma,et al. Three-dimensional dendritic needle network model for alloy solidification , 2016 .
[13] Xiaodong Wang,et al. Flow Driven by an Archimedean Helical Permanent Magnetic Field. Part II: Transient and Modulated Flow Behaviors , 2016, Metallurgical and Materials Transactions B.
[14] Xiaodong Wang,et al. Numerical Study of Flow Motion and Patterns Driven by a Rotating Permanent Helical Magnetic Field , 2016, Metallurgical and Materials Transactions B.
[15] Y. Fautrelle,et al. Experimental study of the solidification of Sn–10 wt.%Pb alloy under different forced convection in benchmark experiment , 2015 .
[16] Haibo Sun,et al. Study on the Macrosegregation Behavior for the Bloom Continuous Casting: Model Development and Validation , 2014, Metallurgical and Materials Transactions B.
[17] Baicheng Liu,et al. Two-Phase Modeling of Macrosegregation in a 231 t Steel Ingot , 2014 .
[18] L. Deng,et al. Effects of spiral magnetic field on structures transformation and macrosegregation of Sn-Pb alloy , 2013, Acta Metallurgica Sinica (English Letters).
[19] Hugues Digonnet,et al. Direct Simulation of a Solidification Benchmark Experiment , 2013, Metallurgical and Materials Transactions A.
[20] A. Ludwig,et al. Simulation of channel segregation using a two-phase columnar solidification model – Part I: Model description and verification , 2012 .
[21] M. Založnik,et al. An operator splitting scheme for coupling macroscopic transport and grain growth in a two-phase multiscale solidification model: Part II – Application of the model , 2010 .
[22] N. Barman,et al. Studies on transport phenomena during solidification of an aluminum alloy in the presence of linear electromagnetic stirring , 2009 .
[23] S. Ganguly,et al. Morphology and Segregation in Continuously Cast High Carbon Steel Billets , 2007 .
[24] Hiroshi Harada,et al. Numerical simulation of solidification structure formation during continuous casting in Fe-0.7mass%C alloy using cellular automaton method , 2006 .
[25] Kyung Shik Oh,et al. Macrosegregation Behavior in Continuously Cast High Carbon Steel Blooms and Billets at the Final Stage of Solidification in Combination Stirring , 1995 .
[26] Kenzo Ayata,et al. The Linear-motor Type In-mold Electromagnetic Stirring Technique for the Slab Continuous Caster , 1989 .
[27] M. Rappaz,et al. Solute diffusion model for equiaxed dendritic growth , 1987 .
[28] K. Murata,et al. Secondary Cooling Pattern for the Prevention of Surface Cracks of Continuous Casting Slab , 1976 .