Transceiver Design for Ful1-Duplex Ultra-Reliable Low-Latency Communications with Finite Blocklength

In this paper, we jointly optimize the transceiver design and decoding error probability of a full-duplex (FD) ultrareliable low-latency communication (URLLC) system, where the base-station (BS) operates in an FD mode while the uplink (UL) and downlink (DL) users work in a half-duplex (HD) mode. Accordingly, an optimization problem is formulated for an FD URLLC system under the finite blocklength (FBL) to maximize the achievable total (UL plus DL) rate subject to the reliability (i.e., the decoding error probability) of each link and total transmission power constraints at the UL user and the BS. We convexify the formulated non-convex problem by analyzing the problem structure. Next, an efficient iterative algorithm is proposed to find the near-optimal power allocation for the UL user and the transceiver weights for the BS. Simulation examples show the impact of the blocklength and decoding error probability on the system performance.

[1]  Walid Saad,et al.  Dynamic Resource Allocation for Optimized Latency and Reliability in Vehicular Networks , 2018, IEEE Access.

[2]  Andreas Mitschele-Thiel,et al.  Latency Critical IoT Applications in 5G: Perspective on the Design of Radio Interface and Network Architecture , 2017, IEEE Communications Magazine.

[3]  Tharmalingam Ratnarajah,et al.  Beamforming Design for Full-Duplex Cellular and Mimo Radar Coexistence: A Rate Maximization Approach , 2018, 2018 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP).

[4]  H. Vincent Poor,et al.  Channel Coding Rate in the Finite Blocklength Regime , 2010, IEEE Transactions on Information Theory.

[5]  Behrooz Makki,et al.  Finite Block-Length Analysis of Spectrum Sharing Networks Using Rate Adaptation , 2015, IEEE Transactions on Communications.

[6]  Branka Vucetic,et al.  Optimizing Resource Allocation in the Short Blocklength Regime for Ultra-Reliable and Low-Latency Communications , 2019, IEEE Transactions on Wireless Communications.

[7]  Ashutosh Sabharwal,et al.  Full-duplex wireless communications using off-the-shelf radios: Feasibility and first results , 2010, 2010 Conference Record of the Forty Fourth Asilomar Conference on Signals, Systems and Computers.

[8]  Stephen P. Boyd,et al.  Convex Optimization , 2004, Algorithms and Theory of Computation Handbook.

[9]  Li-Chun Wang,et al.  Toward Optimal Multiuser Antenna Beamforming for Hierarchical Cognitive Radio Systems , 2012, IEEE Transactions on Communications.

[10]  Chao Shen,et al.  Joint Uplink and Downlink Transmission Design for URLLC Using Finite Blocklength Codes , 2018, 2018 15th International Symposium on Wireless Communication Systems (ISWCS).

[11]  Giuseppe Durisi,et al.  Quasi-Static Multiple-Antenna Fading Channels at Finite Blocklength , 2013, IEEE Transactions on Information Theory.

[12]  Petar Popovski,et al.  Wireless Access in Ultra-Reliable Low-Latency Communication (URLLC) , 2018, IEEE Transactions on Communications.

[13]  Tharmalingam Ratnarajah,et al.  Resource Optimization in Full Duplex Non-Orthogonal Multiple Access Systems , 2019, IEEE Transactions on Wireless Communications.

[14]  James Gross,et al.  Blocklength-Limited Performance of Relaying Under Quasi-Static Rayleigh Channels , 2016, IEEE Transactions on Wireless Communications.

[15]  Kerstin Vogler,et al.  Table Of Integrals Series And Products , 2016 .

[16]  Philip Schniter,et al.  Full-Duplex MIMO Relaying: Achievable Rates Under Limited Dynamic Range , 2011, IEEE Journal on Selected Areas in Communications.

[17]  Giuseppe Caire,et al.  Optimum Power Control at Finite Blocklength , 2014, IEEE Transactions on Information Theory.

[18]  Wei Yu,et al.  A D2D-Based Protocol for Ultra-Reliable Wireless Communications for Industrial Automation , 2017, IEEE Transactions on Wireless Communications.