Compatibility of a post-industrial ceramic with nitrate molten salts for use as filler material in a thermocline storage system

This paper demonstrates the potential of a post-industrial ceramic commercially called Cofalit® as a promising, sustainable, and cheap filler material in a molten salt direct thermocline storage system. This ceramic, which comes from industrial treatment of asbestos containing waste, demonstrates relevant properties to store thermal energy by sensible heat up to 1100°C and is very inexpensive. In the present study, the compatibility of this ceramic with two different molten salts—the conventional binary Solar salt and a promising ternary nitrate salt also called HITEC XL—is tested at medium temperature (500°C) under static state. The objective is to develop a molten salt thermocline direct storage system using low-cost shaped ceramic as filler material. It should significantly decrease the cost of parabolic trough storage systems and simultaneously increase the efficiency of the plants by producing superheated steam at higher temperature.

[1]  Suresh V. Garimella,et al.  An Integrated Thermal and Mechanical Investigation of Molten-Salt Thermocline Energy Storage , 2011 .

[2]  Zhifeng Wang,et al.  Sensitivity analysis of the numerical study on the thermal performance of a packed-bed molten salt thermocline thermal storage system , 2012 .

[3]  X. Py,et al.  Corrosion effects between molten salts and thermal storage material for concentrated solar power plants , 2012 .

[4]  C. Zamparelli,et al.  High efficency integration of thermodynamic solar plant with natural gas combined cycle , 2007, 2007 International Conference on Clean Electrical Power.

[5]  J. C. Gomez,et al.  Ca(NO3)2—NaNO3—KNO3 Molten Salt Mixtures for Direct Thermal Energy Storage Systems in Parabolic Trough Plants , 2013 .

[6]  Patrick Echegut,et al.  Thermal storage material from inertized wastes: Evolution of structural and radiative properties with temperature , 2012 .

[7]  Ulf Herrmann,et al.  Two-tank molten salt storage for parabolic trough solar power plants , 2004 .

[8]  Xiaoxi Yang,et al.  The preparation and properties of multi-component molten salts , 2010 .

[9]  Luisa F. Cabeza,et al.  State of the art on high-temperature thermal energy storage for power generation. Part 2--Case studies , 2010 .

[10]  James E. Pacheco,et al.  Performance of the solar two central receiver power plant , 1998 .

[11]  Runhua Jiang,et al.  Thermocline stability criterions in single-tanks of molten salt thermal energy storage , 2012 .

[12]  J. Pacheco,et al.  DEVELOPMENT OF A MOLTEN-SALT THERMOCLINE THERMAL STORAGE SYSTEM FOR PARABOLIC TROUGH PLANTS , 2001 .

[13]  John W. Kelton,et al.  Testing of Thermocline Filler Materials and Molten-Salt Heat Transfer Fluids for Thermal Energy Storage Systems in Parabolic Trough Power Plants , 2004 .

[14]  Luisa F. Cabeza,et al.  State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization , 2010 .

[15]  Patrick Echegut,et al.  Recycled Material for Sensible Heat Based Thermal Energy Storage to be Used in Concentrated Solar Thermal Power Plants , 2011 .