A novel robust optimum control algorithm and its application to semi-active controlled base-isolated structures

A new Robust Optimum control algorithm that combines a Linear Quadratic Regulator and a nonlinear robust compensator is presented to improve the control of the seismic response of building structures with nonlinear isolation systems. The Linear Quadratic Regulator was used to achieve the optimal performance of a nominal linear model of the controlled structure, and a robust compensator was developed to restrain the effect of nonlinearities. The Robust Optimum control method was proven theoretically, and implemented to control the response of a base-isolated structure equipped with a Tunable Friction Pendulum System isolation under different ground motions. The simulation results validated the stability, robustness, and generalization ability of the proposed control algorithm, and suggested that it is effective in controlling base isolation displacement, inter-story drift, and floor acceleration. The designed robust compensator can successfully compensate for the effect of nonlinearities.

[1]  Mohamed A. ElGawady,et al.  Appropriate viscous damping for nonlinear time‐history analysis of base‐isolated reinforced concrete buildings , 2013 .

[2]  Andrei M. Reinhorn,et al.  Teflon Bearings in Base Isolation I: Testing , 1990 .

[3]  Chun-Yi Su,et al.  Robust adaptive control of a class of nonlinear systems with unknown backlash-like hysteresis , 2000, IEEE Trans. Autom. Control..

[4]  Stefan Hurlebaus,et al.  Semi-active adaptive control of seismically excited 20-story nonlinear building , 2013 .

[5]  Michael C. Constantinou,et al.  Semi-active control systems for seismic protection of structures: a state-of-the-art review , 1999 .

[6]  Satish Nagarajaiah,et al.  Experimental study of sliding base-isolated buildings with magnetorheological dampers in near-fault earthquakes , 2005 .

[7]  Henri P. Gavin,et al.  A parametric study of linear and non-linear passively damped seismic isolation systems for buildings , 2004 .

[8]  Fabio Mazza,et al.  Nonlinear Response of RC Framed Buildings with Isolation and Supplemental Damping at the Base Subjected to Near-Fault Earthquakes , 2009 .

[9]  Murat Dicleli,et al.  Supplemental elastic stiffness to reduce isolator displacements for seismic-isolated bridges in near-fault zones , 2007 .

[10]  Wen Yu,et al.  Advances in modeling and vibration control of building structures , 2013, Annu. Rev. Control..

[11]  Makoto Ohsaki,et al.  Simplified methods for design of base‐isolated structures in the long‐period high‐damping range , 2006 .

[12]  Satish Nagarajaiah,et al.  Seismic control of smart base isolated buildings with new semiactive variable damper , 2007 .

[13]  Erik A. Johnson,et al.  Dissipativity and performance analysis of smart dampers via LMI synthesis , 2007 .

[14]  Henri P. Gavin,et al.  Optimal Control: Basis for Performance Comparison of Passive and Semiactive Isolation Systems , 2006 .

[15]  Reza Langari,et al.  Semiactive nonlinear control of a building with a magnetorheological damper system , 2009 .

[16]  Stefan Hurlebaus,et al.  Active and Semi‐active Adaptive Control for Undamaged and Damaged Building Structures Under Seismic Load , 2012, Comput. Aided Civ. Infrastructure Eng..

[17]  Rahmi Guclu,et al.  Vibration control of a structure with ATMD against earthquake using fuzzy logic controllers , 2008 .

[18]  Alex H. Barbat,et al.  Active Control of Nonlinear Base-Isolated Buildings , 1995 .

[19]  Osman E. Ozbulut,et al.  Superelastic semi‐active damping of a base‐isolated structure , 2008 .

[20]  S. Pourzeynali,et al.  Active control of high rise building structures using fuzzy logic and genetic algorithms , 2007 .

[21]  Andrei M. Reinhorn,et al.  Teflon Bearings in Base Isolation II: Modeling , 1990 .

[22]  Billie F. Spencer,et al.  “Smart” Base Isolation Strategies Employing Magnetorheological Dampers , 2002 .

[23]  John F. Hall,et al.  The role of damping in seismic isolation , 1999 .

[24]  A. Khajekaramodin H. Haji,et al.  Semi-active Control of Structures Using Neuro-Inverse Model of MR Dampers , 2007 .

[25]  Chen Wei,et al.  Robust adaptive control of a class of nonlinear systems , 2003, International Symposium on Instrumentation and Control Technology.

[26]  Shirley J. Dyke,et al.  Semiactive Control Strategies for MR Dampers: Comparative Study , 2000 .

[27]  Tsai Yachun,et al.  Development of a tunable friction pendulum system for semi‐active control of building structures under earthquake ground motions , 2018 .

[28]  Nicholas Fisco,et al.  Smart structures: Part II — Hybrid control systems and control strategies , 2011 .

[29]  R. S. Jangid,et al.  Base isolation for near‐fault motions , 2001 .

[30]  Farzad Naeim,et al.  Design of seismic isolated structures : from theory to practice , 1999 .

[31]  Gangbing Song,et al.  Nonlinear Structural Vibration Suppression Using Dynamic Neural Network Observer and Adaptive Fuzzy Sliding Mode Control , 2010 .

[32]  Anil K. Chopra,et al.  Dynamics of Structures: Theory and Applications to Earthquake Engineering , 1995 .

[33]  J. N. Yang,et al.  Sliding Mode Control for Nonlinear and Hysteretic Structures , 1995 .

[34]  Yisheng Zhong,et al.  Robust LQR Attitude Control of a 3-DOF Laboratory Helicopter for Aggressive Maneuvers , 2013, IEEE Transactions on Industrial Electronics.

[35]  Jamshid Ghaboussi,et al.  Active Control of Structures Using Neural Networks , 1995 .

[36]  Dimitrios Konstantinidis,et al.  The Influence of Isolator Hysteresis on Equipment Performance in Seismic Isolated Buildings , 2010 .

[37]  Wei Huang,et al.  Non‐linear analysis of a collapsed reinforced concrete chimney , 2004 .