Analysis and Simulation of Hollow-Fiber Reverse-Osmosis Modules

Abstract The purpose of this work is to analyze the performance of hollow-fiber reverse-osmosis (HFRO) systems. First, the mass and momentum balances on the fluids inside and outside of the hollow fibers are derived. Consequently, these equations are coupled with the membrane transport expressions to provide a two-phase model for completely describing the hydrodynamic behavior of HFRO units. The model equations are solved numerically via discretization techniques. Experimental data are used for two objectives; transport-parameters estimation and model validation. Based upon optimization principles, a parameter-estimation technique is proposed for correlating the membrane-transport coefficients with the operating pressures and concentrations. The model validity is elucidated by comparing the theoretical predictions with the experimental data for different HFRO modules and over a wide range of operating parameters.

[1]  Lee F. Comb.  Going forward with reverse osmosis , 1994 .

[2]  A. Katchalsky,et al.  Thermodynamic analysis of the permeability of biological membranes to non-electrolytes. , 1958, Biochimica et biophysica acta.

[3]  J. Hermans,et al.  Physical aspects governing the design of hollow fiber modules , 1978 .

[4]  H. Brinkman.  A calculation of the viscous force exerted by a flowing fluid on a dense swarm of particles , 1949 .

[5]  M. El‐Halwagi.  Analysis of fluidized beds for the simultaneous aerosol separation and heat recovery , 1993 .

[6]  Simon L. Goren,et al.  Model for predicting pressure drop and filtration efficiency in fibrous media , 1968 .

[7]  D. F. James,et al.  The permeability of fibrous porous media , 1986 .

[8]  William N. Gill,et al.  Hollow fiber reverse osmosis systems analysis and design , 1973 .

[9]  Christopher K. W. Tam,et al.  The drag on a cloud of spherical particles in low Reynolds number flow , 1969, Journal of Fluid Mechanics.

[10]  Mahendra R. Doshi,et al.  Hollow fiber reverse osmosis: experiments and analysis of radial flow systems , 1975 .

[11]  T. Lundgren,et al.  Slow flow through stationary random beds and suspensions of spheres , 1972, Journal of Fluid Mechanics.

[12]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[13]  Mahmoud M. El-Halwagi,et al.  Synthesis of reverse‐osmosis networks for waste reduction , 1992 .

[14]  William N. Gill,et al.  ANALYSIS AND DESIGN OF HOLLOW FIBER REVERSE OSMOSIS SYSTEMS , 1982 .

[15]  W. Gill,et al.  REVIEW OF REVERSE OSMOSIS MEMBRANES AND TRANSPORT MODELS , 1981 .

[16]  Mahmoud M. El-Halwagi.  Optimal Design of Membrane-Hybrid Systems for Waste Reduction , 1993 .

[17]  Mahendra R. Doshi,et al.  RADIAL FLOW HOLLOW FIBERREVERSE OSMOSIS: EXPERIMENTS AND THEORY , 1979 .

[18]  William N. Gill,et al.  An experimental study of the complete-mixing model for radial flow hollow fiber reverse osmosis systems , 1984 .

[19]  G. Smith,et al.  Numerical Solution of Partial Differential Equations: Finite Difference Methods , 1978 .

[20]  T. Matsuura,et al.  Some transport characteristics of aromatic polyamide membranes in reverse osmosis , 1976 .

[21]  Sharad K. Gupta.  Design and analysis of a radial-flow hollow-fiber reverse-osmosis system , 1987 .

[22]  Haruhiko Ohya,et al.  An analysis of reverse osmotic characteristics of B-9 hollow fiber module , 1977 .

[23]  Suhas V. Patankar,et al.  Development of generalized block correction procedures for the solution of discretized navier-stokes equations , 1987 .

[24]  John Happel,et al.  Viscous flow relative to arrays of cylinders , 1959 .

[25]  S. W. Yuan,et al.  Laminar Pipe Flow With Injection and Suction Through a Porous Wall , 1955, Journal of Fluids Engineering.