Evaluation of the Feasibility of Irrigation Storage in a Flood Detention Pond in an Agricultural Catchment in Northern Italy

During recent years, the international attention paid to rational use and saving of water has increased, partly because of frequent water shortages occurring also in countries not usually involved in these problems, and partly as a consequence of rising conflicts on water allocation. Hence it is important to find new surface-water volumes satisfying agricultural water demand, as well as new ways and areas to store them. The simulation model presented by the paper enables evaluation, in a phase of design feasibility analysis, of whether a flood detention pond can be adapted to act as water storage during irrigation periods in order to reduce agricultural water shortages; it simulates detention pond response to floods and droughts under different hydraulic conditions and reservoir management rules. The first policy goal of the model is to maintain the stored volume within the maximum admissible for flood safety. The second goal is to maintain at the same time a minimum flow in the river and to satisfy irrigation water demand. The model, implemented in a purpose-made simulation software, was applied to an Italian river in the Emilia Romagna region: the results demonstrate that the use of a flood detention pond as an irrigation reservoir is not only possible, if it complies with the operating rules that emerge from this study, but also it brings tangible benefits in reducing agricultural water deficit.