Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes

[1]  G. Long,et al.  Quantitative analysis of the influence of subfreezing temperature on the mechanical properties of steam-cured concrete , 2019, Construction and Building Materials.

[2]  D. Hou,et al.  Molecular dynamics modeling of the structure, dynamics, energetics and mechanical properties of cement-polymer nanocomposite , 2019, Composites Part B: Engineering.

[3]  G. Long,et al.  Design and preparation of ultra-high performance concrete with low environmental impact , 2019, Journal of Cleaner Production.

[4]  Xiaojie Yang,et al.  Effect of triethanolamine hydrochloride on the performance of cement paste , 2019, Construction and Building Materials.

[5]  Qing Chen,et al.  Utilization of the black tea powder as multifunctional admixture for the hemihydrate gypsum , 2019, Journal of Cleaner Production.

[6]  G. Long,et al.  Preparation of cleaner one-part geopolymer by investigating different types of commercial sodium metasilicate in China , 2018, Journal of Cleaner Production.

[7]  G. Long,et al.  Effect of subsequent curing on surface permeability and compressive strength of steam-cured concrete , 2018, Construction and Building Materials.

[8]  Xianming Shi,et al.  Statistical Characteristics of Microhardness of Hardened Cement Paste , 2018, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[9]  Hong-gi Kim,et al.  Influence of the surface roughness of crushed natural aggregates on the microhardness of the interfacial transition zone of concrete with mineral admixtures and polymer latex , 2018 .

[10]  G. Long,et al.  The mechanical characteristics of steam-cured high strength concrete incorporating with lightweight aggregate , 2017 .

[11]  Xinping Li,et al.  Influence of superabsorbent polymers on the surrounding cement paste , 2016 .

[12]  Bibhuti Bhusan Mukharjee,et al.  Influence of incorporation of nano-silica and recycled aggregates on compressive strength and microstructure of concrete , 2014 .

[13]  Guangcheng Long,et al.  Experimental investigation on dynamic mechanical characteristics and microstructure of steam-cured concrete , 2014 .

[14]  Daman K. Panesar,et al.  Accelerated carbonation – A potential approach to sequester CO2 in cement paste containing slag and reactive MgO , 2013 .

[15]  Chunhua Shen,et al.  Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete , 2013 .

[16]  Z. Shui,et al.  Effect of water–binder ratio and fly ash on the homogeneity of concrete , 2013 .

[17]  Daman K. Panesar,et al.  Effects of accelerated carbonation on the microstructure of Portland cement pastes containing reactive MgO , 2012 .

[18]  Liu Jun-zhe.  Expansive deformation behavior of steam-cured cementitious materials and corresponding control measurement , 2012 .

[19]  Liu Jun-zhe.  Water Sorptivity of Steam Curing Concrete , 2012 .

[20]  Shaopeng Wu,et al.  Influence of silica fume on the interfacial bond between aggregate and matrix in near-surface layer of concrete , 2009 .

[21]  Mohamed Lachemi,et al.  Strength, Durability and Micro-structural Aspects of High Performance Volcanic Ash Concrete , 2007 .

[22]  Khandaker M. A. Hossain,et al.  HIGH STRENGTH BLENDED CEMENT CONCRETE INCORPORATING VOLCANIC ASH: PERFORMANCE AT HIGH TEMPERATURES , 2006 .

[23]  Chunxiang Qian,et al.  ITZ microstructure of concrete containing GGBS , 2005 .

[24]  M. Glinicki,et al.  Depth-sensing indentation method for evaluation of efficiency of secondary cementitious materials , 2004 .

[25]  C. Page,et al.  Effects of metakaolin, water/binder ratio and interfacial transition zones on the microhardness of cement mortars , 2002 .

[26]  Chunxiang Qian,et al.  Experimental study on properties of polymer-modified cement mortars with silica fume , 2002 .

[27]  Chi Sun Poon,et al.  Impact of high temperature on PFA concrete , 2001 .

[28]  I. Roman,et al.  Vickers microindentation of WC–12%Co thermal spray coating: Part 1: statistical analysis of microhardness data , 2000 .

[29]  Maxence Bigerelle,et al.  Statistical analysis of the Vickers hardness , 1999 .

[30]  S. Mindess,et al.  Microhardness testing of cementitious materials , 1996 .

[31]  S. Mindess,et al.  Characterization of the microstructure and strength of cement paste by microhardness testing , 1996 .

[32]  S. Mindess,et al.  The effect of processing on the bond and interfaces in steel fiber reinforced cement composites , 1996 .

[33]  C. C. Berndt,et al.  Statistical analysis of microhardness variations in thermal spray coatings , 1995 .

[34]  J. Ollivier,et al.  Interfacial transition zone in concrete , 1995 .

[35]  S. Igarashi,et al.  Effects of a size in bundled fibers on the interfacial zone between the fibers and the cement paste matrix , 1994 .