Insertion torque of orthodontic miniscrews according to changes in shape, diameter and length.

OBJECTIVE To determine the variation in the insertion torque of orthodontic miniscrews according to the screw length, diameter, and shape. MATERIALS AND METHODS The maximum insertion torque (MIT) was measured using a torque tester at a constant speed of 3 rotations per minute. Cylindrical and taper type of miniscrews (Biomaterials Korea Inc, Seoul, Korea) with different lengths, diameters, and pitches were tested. RESULTS The results showed that the insertion torque significantly increased with increasing screw length (P < .01). In particular, there was a significant increase in torque with increasing screw length and diameter (P < .01). An analysis of the serial insertion torque of miniscrews revealed the cylindrical type screw to have much higher insertion torque at the incomplete screw thread, while the taper type screw showed a much higher insertion torque at the final inclination part of the screw thread. The insertion torque was affected by the outer diameter, length, and shape in that order. CONCLUSIONS An increase in screw diameter can efficiently reinforce the initial stability of the miniscrew, but the proximity of the root at the implanted site should be considered.

[1]  H. De Bruyn,et al.  Stability of implants as anchorage for orthopedic traction. , 1999, Angle Orthodontist.

[2]  U. Lekholm,et al.  Influence of initial implant mobility on the integration of titanium implants. An experimental study in rabbits. , 1996, Clinical oral implants research.

[3]  P Diedrich,et al.  The Orthosystem--a new implant system for orthodontic anchorage in the palate. , 1996, Journal of orofacial orthopedics = Fortschritte der Kieferorthopadie : Organ/official journal Deutsche Gesellschaft fur Kieferorthopadie.

[4]  Hyo-Sang Park,et al.  Sliding mechanics with microscrew implant anchorage. , 2004, The Angle orthodontist.

[5]  W M Smalley,et al.  Osseointegrated titanium implants for maxillofacial protraction in monkeys. , 1988, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[6]  Young-chel Park,et al.  The efficient use of midpalatal miniscrew implants. , 2009, The Angle orthodontist.

[7]  Li-Deh Lin,et al.  Removal torque of miniscrews used for orthodontic anchorage--a preliminary report. , 2006, The International journal of oral & maxillofacial implants.

[8]  M. Ueda,et al.  Relationship between insertion torque and removal torque analyzed in fresh temporal bone. , 1991, The International journal of oral & maxillofacial implants.

[9]  K. Gerlach,et al.  Influence of different pilot hole sizes on torque measurements and pullout analysis of osteosynthesis screws. , 1998, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[10]  Jongil Lim,et al.  Three dimensional finite element method for stress distribution on the length and diameter of orthodontic miniscrew and cortical bone thickness , 2003 .

[11]  H. Wehrbein,et al.  Das Orthosystem — Ein neues Implantatsystem zur orthodontischen Verankerung am Gaumen , 1996, Journal of Orofacial Orthopedics / Fortschritte der Kieferorthopädie.

[12]  R. Giardino,et al.  Bone response to orthodontic loading of endosseous implants in the rabbit calvaria: early continuous distalizing forces. , 1999, European Journal of Orthodontics.

[13]  Mitsuru Motoyoshi,et al.  Recommended placement torque when tightening an orthodontic mini-implant. , 2006, Clinical oral implants research.

[14]  Seung-Hyun Kyung,et al.  Bonding orthodontic attachments to miniscrew heads. , 2005, Journal of clinical orthodontics : JCO.

[15]  P Nilsson,et al.  Biomechanical characterization of osseointegration during healing: an experimental in vivo study in the rat. , 1997, Biomaterials.

[16]  T Vuillemin,et al.  Titanium implants and lateral forces. An experimental study with sheep. , 1997, Clinical oral implants research.

[17]  Lars Sennerby,et al.  Influence of implant taper on the primary and secondary stability of osseointegrated titanium implants. , 2004, Clinical oral implants research.

[18]  Dirk Wiechmann,et al.  Load-related implant reaction of mini-implants used for orthodontic anchorage. , 2005, Clinical oral implants research.

[19]  S. Yerby,et al.  Effect of Cutting Flute Design on Cortical Bone Screw Insertion Torque and Pullout Strength , 2001, Journal of orthopaedic trauma.

[20]  Sang-Heng Kok,et al.  A prospective study of the risk factors associated with failure of mini-implants used for orthodontic anchorage. , 2004, The International journal of oral & maxillofacial implants.

[21]  N Meredith,et al.  Assessment of implant stability as a prognostic determinant. , 1998, The International journal of prosthodontics.

[22]  I. Huang,et al.  The application of mini-implants for orthodontic anchorage. , 2006, International journal of oral and maxillofacial surgery.

[23]  E. Benzel,et al.  Effects of hole preparation on screw pullout resistance and insertional torque: a biomechanical study. , 2001, Journal of neurosurgery.

[24]  Shouichi Miyawaki,et al.  Factors associated with the stability of titanium screws placed in the posterior region for orthodontic anchorage. , 2003, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[25]  M W Bidez,et al.  Mechanical properties of trabecular bone in the human mandible: implications for dental implant treatment planning and surgical placement. , 1999, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[26]  R Kanomi,et al.  Mini-implant for orthodontic anchorage. , 1997, Journal of clinical orthodontics : JCO.

[27]  Hyo-Sang Park,et al.  Factors affecting the clinical success of screw implants used as orthodontic anchorage. , 2006, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[28]  Yu-Chuan Tseng,et al.  The use of microimplants in orthodontic anchorage. , 2006, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[29]  Chung-Ju Hwang,et al.  Mechanical characteristics of various orthodontic mini-screws in relation to artificial cortical bone thickness. , 2007, The Angle orthodontist.

[30]  P Diedrich,et al.  The use of palatal implants for orthodontic anchorage. Design and clinical application of the orthosystem. , 1996, Clinical oral implants research.

[31]  L Sennerby,et al.  Measurements comparing the initial stability of five designs of dental implants: a human cadaver study. , 2000, Clinical implant dentistry and related research.