Insights into oxidation and nitridation of alumina-forming FeCrAl alloy after supercritical water exposure: Effect of pre-corrosion on high-temperature damage behavior

[1]  Elena Palomo del Barrio,et al.  Development of active thermochemical barrier coatings using metal oxides , 2023, Surface and Coatings Technology.

[2]  Donghai Xu,et al.  Waterside corrosion of M5 alloy in lithiated/borated and supercritical water: Influences of aqueous environments , 2023, The Journal of Supercritical Fluids.

[3]  Donghai Xu,et al.  Oxidation of Typical Zr-1nb Alloy in High-Temperature Air Under 700–900 °C , 2022, SSRN Electronic Journal.

[4]  Yang Guo,et al.  Inorganic salts crystallization and deposition characteristics and mechanisms in supercritical water , 2022, Desalination.

[5]  Xi Huang,et al.  Corrosion behavior of a dual-phase FeNiCrCuAl high entropy alloy in supercritical water , 2022, Corrosion Science.

[6]  N. Kalarikkal,et al.  A magnetoelectric nanocomposite based on 2 dimensional Cr2O3 and CoFe2O4 , 2022, Solid State Communications.

[7]  J. Svensson,et al.  A Comparison of the Oxidation and Nitridation Properties of Selected Chromia- and Alumina-Forming Alloys at 800 °C , 2022, Oxidation of Metals.

[8]  Yu Wang,et al.  Corrosion behavior of FeCrAl alloy and NiCr coated Zircaloy-4 in hydrogenated water , 2022, International Journal of Hydrogen Energy.

[9]  Hui Liu,et al.  Effect of Zr addition on coarse Laves phase stimulated nucleation of recrystallization in FeCrAl alloy , 2022, Materials Science and Engineering: A.

[10]  A. Pukasiewicz,et al.  Evaluation of high temperature corrosion resistance of CrN, AlCrN, and TiAlN arc evaporation PVD coatings deposited on Waspaloy , 2022, Surface and Coatings Technology.

[11]  J. Svensson,et al.  Efficacy of an External Chromia Layer in Reducing Nitridation of High Temperature Alloys , 2021, Corrosion Science.

[12]  S. Kondo,et al.  Radiation tolerance of alumina scale formed on FeCrAl ODS ferritic steel , 2021, Nuclear Materials and Energy.

[13]  S. Brühl,et al.  Influence of the substrate pre-treatment on the mechanical and corrosion response of multilayer DLC coatings , 2021 .

[14]  Donghai Xu,et al.  Corrosion of FeCrAl alloys used as fuel cladding in nuclear reactors , 2021, Journal of Alloys and Compounds.

[15]  D. Bartels,et al.  Corrosion behavior of ferritic FeCrAl alloys in simulated BWR normal water chemistry , 2020 .

[16]  N. Birbilis,et al.  Exploring failure modes of alumina scales on FeCrAl and FeNiCrAl alloys in a nitriding environment , 2020, Acta Materialia.

[17]  Ji Dong,et al.  Oxidation behavior analysis of a ferritic ODS steel in supercritical Water , 2020 .

[18]  H. Khan,et al.  The characterization of oxide scales formed on ferritic-martensitic steel in supercritical water with dissolved oxygen , 2020 .

[19]  K. Terrani,et al.  Hydrothermal corrosion of 2nd generation FeCrAl alloys for accident tolerant fuel cladding , 2020 .

[20]  S. Hayashi,et al.  Effect of Zr on Initial Oxidation Behavior of FeCrAl Alloys , 2020, Oxidation of Metals.

[21]  M. Daymond,et al.  Oxidation behavior of 9Cr-4.5Al ODS steel in 600 °C supercritical water and the effect of pre-oxidation , 2020 .

[22]  Yi Huang,et al.  Understanding the influences of pre-corrosion on the erosion-corrosion performance of pipeline steel , 2020 .

[23]  Xiao Huang,et al.  Effect of Steam Temperature and Pressure on the Oxidation of Potential Coating Alloy FeCrAl for Supercritical Water-Cooled Reactor Application , 2019, Journal of Nuclear Engineering and Radiation Science.

[24]  W. Hu,et al.  Sulfur induced corrosion (SIC) mechanism of steam generator (SG) tubing at micro scale: A critical review , 2019, Materials Chemistry and Physics.

[25]  S. Hayashi,et al.  Effects of zirconium and oxygen on the oxidation of FeCrAl-ODS alloys under air and steam conditions up to 1500 °C , 2019, Journal of Nuclear Materials.

[26]  Jian Peng,et al.  Influence of Al content and pre-oxidation on the aqueous corrosion resistance of binary Fe-Al alloys in sulphuric acid , 2019, Corrosion Science.

[27]  K. Terrani,et al.  Improving Nuclear Power Plant Safety with FeCrAl Alloy Fuel Cladding , 2017 .

[28]  Kurt A. Terrani,et al.  Uniform corrosion of FeCrAl alloys in LWR coolant environments , 2016 .

[29]  J. Svensson,et al.  Nitridation of a Fecral Alloy in H2+N2 Environment at 900oc: A Microstructural Study , 2016 .

[30]  Xiao Huang,et al.  Supercritical oxidation of boiler tube materials , 2016 .

[31]  Kurt A. Terrani,et al.  Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors , 2015 .

[32]  Martin Steinbrück,et al.  Air oxidation of Zircaloy-4, M5® and ZIRLO™ cladding alloys at high temperatures , 2011 .

[33]  E. Han,et al.  Effect of nickel ion from autoclave material on oxidation behaviour of 304 stainless steel in oxygenated high temperature water , 2011 .

[34]  K. Sridharan,et al.  Corrosion of alumina-forming austenitic steel Fe–20Ni–14Cr–3Al–0.6Nb–0.1Ti in supercritical water , 2010 .

[35]  Wei Qu,et al.  Progress in corrosion resistant materials for supercritical water reactors , 2009 .

[36]  A. Galerie,et al.  On the Competitive Growth of Alpha and Transient Aluminas During the First Stages of Thermal Oxidation of FeCrAl Alloys at Intermediate Temperatures , 2008 .

[37]  C. Duriez,et al.  Zircaloy-4 and M5 ® high temperature oxidation and nitriding in air , 2008 .

[38]  Yutaka Watanabe,et al.  Effect of Chromium Ion from Autoclave Material on Corrosion Behavior of Nickel-Based Alloys in Supercritical Water , 2007 .

[39]  H. D. Bist,et al.  Thin film of aluminum oxide through pulsed laser deposition: a micro-Raman study , 2001 .

[40]  A. Deneuville,et al.  Raman spectra of TiN/AlN superlattices , 2000 .

[41]  R. Mishra.  Study the effect of pre-corrosion on mechanical properties and fatigue life of aluminum alloy 8011 , 2020 .

[42]  Jingli Luo,et al.  Review—Factors Influencing Sulfur Induced Corrosion on the Secondary Side in Pressurized Water Reactors (PWRs) , 2019, Journal of The Electrochemical Society.

[43]  L. Johansson,et al.  Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments , 2017 .

[44]  R. Rebak.  Iron-chrome-aluminum alloy cladding for increasing safety in nuclear power plants , 2017 .