Gust alleviation of highly flexible UAVs with artificial hair sensors

Artificial hair sensors (AHS) have been recently developed in Air Force Research Laboratory (AFRL) using carbon nanotube (CNT). The deformation of CNT in air flow causes voltage and current changes in the circuit, which can be used to quantify the dynamic pressure and aerodynamic load along the wing surface. AFRL has done a lot of essential work in design, manufacturing, and measurement of AHSs. The work in this paper is to bridge the current AFRL’s work on AHSs and their feasible applications in flight dynamics and control (e.g., the gust alleviation) of highly flexible aircraft. A highly flexible vehicle is modeled using a strain-based geometrically nonlinear beam formulation, coupled with finite-state inflow aerodynamics. A feedback control algorithm for the rejection of gust perturbations will be developed. A simplified Linear Quadratic Regulator (LQR) controller will be implemented based on the state-space representation of the linearized system. All AHS measurements will be used as the control input, i.e., wing sectional aerodynamic loads will be defined as the control output for designing the feedback gain. Once the controller is designed, closed-loop aeroelastic simulations will be performed to evaluate the performance of different controllers with the force feedback and be compared to traditional controller designs with the state feedback. From the study, the feasibility of AHSs in flight control will be assessed. The whole study will facilitate in building a fly-by-feel simulation environment for autonomous vehicles.

[1]  Terrence A. Weisshaar,et al.  Aeroelasticity of Nonconventional Airplane Configurations-Past and Future , 2003 .

[2]  Carlos E. S. Cesnik,et al.  Modeling of High Aspect Ratio Active Flexible Wings for Roll Control , 2002 .

[3]  Eglin Afb,et al.  Response of Passive Surface Hairs in Steady Falkner-Skan Boundary Layers , 2012 .

[4]  Wei Xian,et al.  Bat wing sensors support flight control , 2011, Proceedings of the National Academy of Sciences.

[5]  Carlos E. S. Cesnik,et al.  Nonlinear Aeroelasticity of a Very Flexible Blended-Wing-Body Aircraft , 2009 .

[6]  Frederic M. Hoblit,et al.  Gust Loads on Aircraft: Concepts and Applications , 1988 .

[7]  George A. Bekey,et al.  AUTONOMOUS ROBOTS, From Biological Inspiration to Implementation and Control, by G.A. Bekey, MIT Press, 2005, xv + 577 pp., index, ISBN 0-262-02578-7, 25 pages of references (Hb. £35.95) , 2005, Robotica.

[8]  Carlos E. S. Cesnik,et al.  Nonlinear Flight Dynamics of Very Flexible Aircraft , 2005 .

[9]  Carlos E. S. Cesnik,et al.  Geometrically Nonlinear Theory of Composite Beams with Deformable Cross Sections , 2008 .

[10]  Gregory W. Reich,et al.  Detection of flow separation and stagnation points using artificial hair sensors , 2015 .

[11]  M. Patil,et al.  Gust Response of Highly Flexible Aircraft , 2006 .

[12]  Carlos E. S. Cesnik,et al.  Nonlinear Aeroelastic Modeling and Analysis of Fully Flexible Aircraft , 2005 .

[13]  Mayuresh J. Patil,et al.  Nonlinear Gust Response of Highly Flexible Aircraft , 2007 .

[14]  Olivier A. Bauchau,et al.  Nonlinear Composite Beam Theory , 1988 .

[15]  Stephen T. McClain,et al.  A Flap-Based Gust Generation System for Hair Sensor Investigations , 2013 .

[16]  Carlos E. S. Cesnik,et al.  Strain-Based Analysis for Geometrically Nonlinear Beams: A Modal Approach , 2012 .

[17]  Matija Gams,et al.  The strain-based beam finite elements in multibody dynamics , 2007 .

[18]  Carlos E. S. Cesnik,et al.  Active Warping Control of a Joined Wing/Tail Airplane Configuration , 2003 .

[19]  Benjamin T. Dickinson,et al.  The Detection of Unsteady Flow Separation with Bioinspired Hair-Cell Sensors , 2008 .

[20]  Dewey H. Hodges,et al.  Geometrically Exact, Intrinsic Theory for Dynamics of Curved and Twisted Anisotropic Beams , 2004 .

[21]  Mark James Johnson,et al.  Finite-State Airloads for Deformable Airfoils on Fixed and Rotating Wings , 1994 .

[22]  Carlos E. S. Cesnik,et al.  Cross-sectional analysis of nonhomogeneous anisotropic active slender structures , 2005 .

[23]  D. Hodges.  A mixed variational formulation based on exact intrinsic equations for dynamics of moving beams , 1990 .

[24]  Benjamin T. Dickinson,et al.  The Dynamic Response of Quasi-Steady Hair-Like Structures in Oscillatory Boundary Layer Flows , 2012 .

[25]  Benjamin T. Dickinson,et al.  Modeling of Bioinspired Sensors for Flow Separation Detection for Micro Air Vehicles , 2006 .

[26]  Joseba Murua,et al.  Structural and Aerodynamic Models in Nonlinear Flight Dynamics of Very Flexible Aircraft , 2010 .

[27]  Carlos E. S. Cesnik,et al.  Dynamic Response of Highly Flexible Flying Wings , 2011 .

[28]  Ilya Kolmanovsky,et al.  Gust Load Alleviation Control for Very Flexible Aircraft , 2011 .

[29]  Carlos E. S. Cesnik,et al.  Nonlinear Aeroelasticity and Flight Dynamics of High-Altitude Long-Endurance Aircraft , 2001 .

[30]  Miran Saje,et al.  Finite-element formulation of geometrically exact three-dimensional beam theories based on interpolation of strain measures , 2003 .

[31]  Carlos E. S. Cesnik,et al.  Strain-based geometrically nonlinear beam formulation for modeling very flexible aircraft , 2011 .