The viscous flow on surfaces with longitudinal ribs

The viscous sublayer of a turbulent boundary layer on a surface with fine longitudinal ribs (riblets) is investigated theoretically. The mean flow constituent of this viscous flow is considered. Using conformal mapping, the velocity distributions on various surface configurations are calculated. The geometries that were investigated include sawtooth profiles with triangular and trapezoidal grooves as well as profiles with thin blade-shaped ribs, ribs with rounded edges and ribs having sharp ridges and U-shaped grooves. (This latter riblet configuration is also found on the tiny scales of fast sharks.) Our calculations enable us to determine the location of the origin of the velocity profile that lies somewhat below the tips of the ridges. The distance between this origin and the tip of the ridge we call ‘protrusion height’. The upper limit for the protrusion height is found to be 22% of the lateral rib spacing; the coefficient 0.22 being the value of the expression π −1 In 2. This limit is valid for two-dimensional riblet geometries. Analogous experiments with an electrolytic tank are carried out as an additional check on the theoretical calculations. This is also an easy way to determine experimentally the location of the origin of the velocity profile for arbitrary new riblet geometries. A possible connection between protrusion height and drag reduction in a turbulent boundary layer flow is discussed. Finally, the present theory also produces an orthogonal grid pattern above riblet surfaces which may be utilized in future numerical calculations of the whole turbulent boundary layer.

[1]  H. Kober,et al.  Dictionary of conformal representations , 1957 .

[2]  Irene A. Stegun,et al.  Handbook of Mathematical Functions. , 1966 .

[3]  J. Musick,et al.  Hydrodynamic Aspects of Shark Scales , 1984 .

[4]  W. Reif,et al.  Hydrodynamics of the squamation in fast swimming sharks , 1982 .

[5]  C. R. Smith,et al.  The characteristics of low-speed streaks in the near-wall region of a turbulent boundary layer , 1983, Journal of Fluid Mechanics.

[6]  J. P. Johnston,et al.  An experimental study of turbulent boundary layer on rough walls , 1966 .

[7]  Wolf-Ernst Reif,et al.  On the Drag Reduction of the Shark Skin , 1985 .

[8]  M. J. Walsh,et al.  Turbulent boundary layer drag reduction using riblets , 1982 .

[9]  M. S. Acarlar,et al.  A study of hairpin vortices in a laminar boundary layer. Part 1. Hairpin vortices generated by a hemisphere protuberance , 1987, Journal of Fluid Mechanics.

[10]  D. J. Benney,et al.  On the origin of streamwise vortices in a turbulent boundary layer , 1986, Journal of Fluid Mechanics.

[11]  S. P. Wilkinson,et al.  Direct Drag and Hot-Wire Measurements on Thin-Element Riblet Arrays , 1988 .

[12]  M. J. Walsh,et al.  Optimization and application of riblets for turbulent drag reduction , 1984 .

[13]  A. Dinkelacker,et al.  On the Possibility of Drag Reduction with the Help of Longitudinal Ridges in the Walls , 1988 .

[14]  M. J. Walsh,et al.  Riblets as a Viscous Drag Reduction Technique , 1983 .

[15]  F. A. Schraub,et al.  The structure of turbulent boundary layers , 1967, Journal of Fluid Mechanics.